Create a USB BE component that will register a new USB port to the ASoC USB framework. This will handle determination on if the requested audio profile is supported by the USB device currently selected.
Signed-off-by: Wesley Cheng quic_wcheng@quicinc.com --- include/sound/q6usboffload.h | 20 +++ sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6usb.c | 231 ++++++++++++++++++++++++++++++++++ 4 files changed, 256 insertions(+) create mode 100644 include/sound/q6usboffload.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c
diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h new file mode 100644 index 000000000000..e576808901d9 --- /dev/null +++ b/include/sound/q6usboffload.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * linux/sound/q6usboffload.h -- QDSP6 USB offload + * + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/** + * struct q6usb_offload + * @dev - dev handle to usb be + * @sid - streamID for iommu + * @intr_num - usb interrupter number + * @domain - allocated iommu domain + **/ +struct q6usb_offload { + struct device *dev; + u32 sid; + u32 intr_num; + struct iommu_domain *domain; +}; diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 8c7398bc1ca8..d65c365116e5 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -111,6 +111,9 @@ config SND_SOC_QDSP6_APM config SND_SOC_QDSP6_PRM_LPASS_CLOCKS tristate
+config SND_SOC_QDSP6_USB + tristate + config SND_SOC_QDSP6_PRM tristate select SND_SOC_QDSP6_PRM_LPASS_CLOCKS @@ -131,6 +134,7 @@ config SND_SOC_QDSP6 select SND_SOC_TOPOLOGY select SND_SOC_QDSP6_APM select SND_SOC_QDSP6_PRM + select SND_SOC_QDSP6_USB help To add support for MSM QDSP6 Soc Audio. This will enable sound soc platform specific diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile index 3963bf234664..c9457ee898d0 100644 --- a/sound/soc/qcom/qdsp6/Makefile +++ b/sound/soc/qcom/qdsp6/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o +obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c new file mode 100644 index 000000000000..afbff66108bc --- /dev/null +++ b/sound/soc/qcom/qdsp6/q6usb.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/iommu.h> +#include <linux/dma-mapping.h> +#include <linux/dma-map-ops.h> + +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-usb.h> +#include <sound/pcm_params.h> +#include <sound/asound.h> +#include <sound/q6usboffload.h> + +#include "q6dsp-lpass-ports.h" +#include "q6afe.h" + +struct q6usb_port_data { + struct q6afe_usb_cfg usb_cfg; + struct snd_soc_usb *usb; + struct q6usb_offload priv; + int active_idx; +}; + +static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = { + SND_SOC_DAPM_HP("USB_RX_BE", NULL), +}; + +static const struct snd_soc_dapm_route q6usb_dapm_routes[] = { + {"USB Playback", NULL, "USB_RX_BE"}, +}; + +static int q6usb_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + return 0; +} +static const struct snd_soc_dai_ops q6usb_ops = { + .hw_params = q6usb_hw_params, +}; + +static struct snd_soc_dai_driver q6usb_be_dais[] = { + { + .playback = { + .stream_name = "USB BE RX", + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE | + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE | + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE, + .channels_min = 1, + .channels_max = 2, + .rate_max = 192000, + .rate_min = 8000, + }, + .id = USB_RX, + .name = "USB_RX_BE", + .ops = &q6usb_ops, + }, +}; + +static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component, + const struct of_phandle_args *args, + const char **dai_name) +{ + int id = args->args[0]; + int ret = -EINVAL; + int i; + + for (i = 0; i < ARRAY_SIZE(q6usb_be_dais); i++) { + if (q6usb_be_dais[i].id == id) { + *dai_name = q6usb_be_dais[i].name; + ret = 0; + break; + } + } + + return ret; +} + +static int q6usb_component_probe(struct snd_soc_component *component) +{ + struct q6usb_port_data *data = dev_get_drvdata(component->dev); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + + data->usb->component = component; + + snd_soc_dapm_disable_pin(dapm, "USB_RX_BE"); + snd_soc_dapm_sync(dapm); + + return 0; +} + +static const struct snd_soc_component_driver q6usb_dai_component = { + .probe = q6usb_component_probe, + .name = "q6usb-dai-component", + .dapm_widgets = q6usb_dai_widgets, + .num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets), + .dapm_routes = q6usb_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes), + .of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name, +}; + +static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, int card_idx, + int connected) +{ + struct snd_soc_dapm_context *dapm; + struct q6usb_port_data *data; + + /* Check if routes to the backend have not yet been established */ + if (!usb->component) + return -ENODEV; + + dapm = snd_soc_component_get_dapm(usb->component); + data = dev_get_drvdata(usb->component->dev); + + if (connected) { + snd_soc_dapm_enable_pin(dapm, "USB_RX_BE"); + /* We only track the latest USB headset plugged in */ + data->active_idx = card_idx; + } else { + snd_soc_dapm_disable_pin(dapm, "USB_RX_BE"); + } + snd_soc_dapm_sync(dapm); + + return 0; +} + +static int q6usb_dai_dev_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct q6usb_port_data *data; + struct device *dev = &pdev->dev; + int ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = of_property_read_u32(node, "qcom,usb-audio-stream-id", + &data->priv.sid); + if (ret) { + dev_err(&pdev->dev, "failed to read sid.\n"); + return -ENODEV; + } + + ret = of_property_read_u32(node, "qcom,usb-audio-intr-num", + &data->priv.intr_num); + if (ret) { + dev_err(&pdev->dev, "failed to read intr num.\n"); + return -ENODEV; + } + + data->priv.domain = iommu_domain_alloc(pdev->dev.bus); + if (!data->priv.domain) { + dev_err(&pdev->dev, "failed to allocate iommu domain\n"); + return -ENODEV; + } + + /* attach to external processor iommu */ + ret = iommu_attach_device(data->priv.domain, &pdev->dev); + if (ret) { + dev_err(&pdev->dev, "failed to attach device ret = %d\n", ret); + goto free_domain; + } + + data->usb = snd_soc_usb_add_port(dev, q6usb_alsa_connection_cb); + if (IS_ERR(data->usb)) { + dev_err(&pdev->dev, "failed to add usb port\n"); + goto detach_device; + } + + data->priv.dev = dev; + dev_set_drvdata(dev, data); + devm_snd_soc_register_component(dev, &q6usb_dai_component, + q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais)); + snd_soc_usb_set_priv_data(dev, &data->priv); + + return 0; + +detach_device: + iommu_detach_device(data->priv.domain, &pdev->dev); +free_domain: + iommu_domain_free(data->priv.domain); + + return ret; +} + +static int q6usb_dai_dev_remove(struct platform_device *pdev) +{ + struct q6usb_port_data *data = platform_get_drvdata(pdev); + + iommu_detach_device(data->priv.domain, &pdev->dev); + iommu_domain_free(data->priv.domain); + + snd_soc_usb_remove_port(&pdev->dev); + + return 0; +} + +static const struct of_device_id q6usb_dai_device_id[] = { + { .compatible = "qcom,q6usb-dais" }, + {}, +}; +MODULE_DEVICE_TABLE(of, q6usb_dai_device_id); + +static struct platform_driver q6usb_dai_platform_driver = { + .driver = { + .name = "q6usb-dai", + .of_match_table = of_match_ptr(q6usb_dai_device_id), + }, + .probe = q6usb_dai_dev_probe, + .remove = q6usb_dai_dev_remove, +}; +module_platform_driver(q6usb_dai_platform_driver); + +MODULE_DESCRIPTION("Q6 USB backend dai driver"); +MODULE_LICENSE("GPL");