Done the required cleanups to update lpass-cpu binding with newer yaml formats.
Signed-off-by: Ajit Pandey ajitp@codeaurora.org --- .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 79 ------------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 131 +++++++++++++++++++++ 2 files changed, 131 insertions(+), 79 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt deleted file mode 100644 index 32c2cdb..0000000 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt +++ /dev/null @@ -1,79 +0,0 @@ -* Qualcomm Technologies LPASS CPU DAI - -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). - -Required properties: - -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : A list which must include the following entries: - * "ahbix-clk" - * "mi2s-osr-clk" - * "mi2s-bit-clk" - : required clocks for "qcom,lpass-cpu-apq8016" - * "ahbix-clk" - * "mi2s-bit-clk0" - * "mi2s-bit-clk1" - * "mi2s-bit-clk2" - * "mi2s-bit-clk3" - * "pcnoc-mport-clk" - * "pcnoc-sway-clk" - -- interrupts : Must contain an entry for each entry in - interrupt-names. -- interrupt-names : A list which must include the following entries: - * "lpass-irq-lpaif" -- pinctrl-N : One property must exist for each entry in - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt - for details of the property values. -- pinctrl-names : Must contain a "default" entry. -- reg : Must contain an address for each entry in reg-names. -- reg-names : A list which must include the following entries: - * "lpass-lpaif" -- #address-cells : Must be 1 -- #size-cells : Must be 0 - - - -Optional properties: - -- qcom,adsp : Phandle for the audio DSP node - -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. -The SD lines to use can be configured by adding subnodes for each of the DAIs. - -Required properties for each DAI (represented by a subnode): -- reg : Must be one of the DAI IDs - (usually part of dt-bindings header) -- qcom,playback-sd-lines: List of serial data lines to use for playback - Each SD line should be represented by a number from 0-3. -- qcom,capture-sd-lines : List of serial data lines to use for capture - Each SD line should be represented by a number from 0-3. - -Note that adding a subnode changes the default to "no lines configured", -so both playback and capture lines should be configured when a subnode is added. - -Example: - -lpass@28100000 { - compatible = "qcom,lpass-cpu"; - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>; - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; - interrupts = <0 85 1>; - interrupt-names = "lpass-irq-lpaif"; - pinctrl-names = "default", "idle"; - pinctrl-0 = <&mi2s_default>; - pinctrl-1 = <&mi2s_idle>; - reg = <0x28100000 0x10000>; - reg-names = "lpass-lpaif"; - qcom,adsp = <&adsp>; - - #address-cells = <1>; - #size-cells = <0>; - - /* Optional to set different MI2S SD lines */ - dai@3 { - reg = <MI2S_QUATERNARY>; - qcom,playback-sd-lines = <0 1>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file mode 100644 index 0000000..f2bcafc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS CPU dai driver bindings + +maintainers: + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + - Ajit Pandey ajitp@codeaurora.org + +description: + Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface + for audio data transfer on external codecs. LPASS cpu driver is a module to + configure Low-Power Audio Interface(LPAIF) core registers across different + IP versions. + +properties: + compatible: + enum: + - qcom,lpass-cpu + - qcom,apq8016-lpass-cpu + + reg: + items: + - description: LPAIF core registers + + reg-names: + items: + - const: lpass-lpaif + + clocks: + items: + - description: AHBIX core clock for IPQ806X + - description: oscillator clock for MI2S external interfaces + - description: Bit clock for single MI2S dai in IPQ806X + - description: Bit clock for MI2S_PRIMARY dai interface + - description: Bit clock for MI2S_SECONDARY dai interface + - description: Bit clock for MI2S_TERTIARY dai interface + - description: Bit clock for MI2S_QUATERNARY dai interface + - description: NOC MPORT clock of LPASS core + - description: NOC SWAY clock of LPASS core + + clock-names: + items: + - const: ahbix-clk + - const: mi2s-osr-clk + - const: mi2s-bit-clk + - const: mi2s-bit-clk0 + - const: mi2s-bit-clk1 + - const: mi2s-bit-clk2 + - const: mi2s-bit-clk3 + - const: pcnoc-mport-clk + - const: pcnoc-sway-clk + + interrupts: + items: + - description: LPAIF DMA buffer interrupt + + interrupt-names: + items: + - const: lpass-irq-lpaif + + qcom,adsp: + maxItems: 1 + description: Phandle for the audio DSP node + + '#sound-dai-cells': + const: 1 + + child-node: + description: Required properties for each DAI + type: object + properties: + reg: + description: Must be one of the DAI ID + (Usually part of dtbindings header) + qcom,playback-sd-lines: + description: List of serial data lines to use for playback + Each SD line should be represented by a number from 0-3. + qcom,capture-sd-lines : + description: List of serial data lines to use for capture + Each SD line should be represented by a number from 0-3. + required: + -reg + # Note that adding a subnode changes the default to "no lines configured", + # so both playback and capture lines should be configured when a subnode + # is added. + + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - sound-dai-cells + +optional: + - qcom,adsp + +examples: + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + + interrupts = <0 85 1>; + interrupt-names = "lpass-irq-lpaif"; + + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + #sound-dai-cells = <1>; + qcom,adsp = <&adsp>; + + #address-cells = <1>; + #size-cells = <0>; + + /* Optional to set different MI2S SD lines */ + mi2s-quaternary@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <0 1>; + };