The slot_width is for essentially same thing. Instead of storing bclk_lrclk_ratio, just store the slot_width. Comments has been updated accordingly and some variable names changed to more descriptive.
Signed-off-by: Jyri Sarha jsarha@ti.com --- sound/soc/davinci/davinci-mcasp.c | 56 ++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 25 deletions(-)
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index de1e3a8..25ff1fc 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -87,7 +87,6 @@ struct davinci_mcasp { u8 *serial_dir; u8 version; u8 bclk_div; - u16 bclk_lrclk_ratio; int streams; u32 irq_request[2]; int dma_request[2]; @@ -558,8 +557,21 @@ static int __davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id, mcasp->bclk_div = div; break;
- case 2: /* BCLK/LRCLK ratio */ - mcasp->bclk_lrclk_ratio = div; + case 2: /* + * BCLK/LRCLK ratio descries how many bit-clock cycles + * fit into one frame. The clock ratio is given for a + * full period of data (for I2S format both left and + * right channels), so it has to be divided by number + * of tdm-slots (for I2S - divided by 2). + * Instead of storing this ratio, we calculate a new + * tdm_slot width by dividing the the ratio by the + * number of configured tdm slots. + */ + mcasp->slot_width = div / mcasp->tdm_slots; + if (div % mcasp->tdm_slots) + dev_warn(mcasp->dev, + "%s(): BCLK/LRCLK %d is not divisible by %d tdm slots", + div, mcasp->tdm_slots); break;
default: @@ -682,11 +694,13 @@ static int davinci_mcasp_set_tdm_slot(struct snd_soc_dai *dai, }
static int davinci_config_channel_size(struct davinci_mcasp *mcasp, - int word_length) + int sample_width) { u32 fmt; - u32 tx_rotate = (word_length / 4) & 0x7; - u32 mask = (1ULL << word_length) - 1; + u32 tx_rotate = (sample_width / 4) & 0x7; + u32 mask = (1ULL << sample_width) - 1; + u32 slot_width = sample_width; + /* * For captured data we should not rotate, inversion and masking is * enoguh to get the data to the right position: @@ -699,31 +713,23 @@ static int davinci_config_channel_size(struct davinci_mcasp *mcasp, u32 rx_rotate = 0;
/* - * if s BCLK-to-LRCLK ratio has been configured via the set_clkdiv() - * callback, take it into account here. That allows us to for example - * send 32 bits per channel to the codec, while only 16 of them carry - * audio payload. - * The clock ratio is given for a full period of data (for I2S format - * both left and right channels), so it has to be divided by number of - * tdm-slots (for I2S - divided by 2). + * Setting the tdm slot width either with set_clkdiv() or + * set_tdm_slot() allows us to for example send 32 bits per + * channel to the codec, while only 16 of them carry audio + * payload. */ - if (mcasp->bclk_lrclk_ratio) { - u32 slot_length = mcasp->bclk_lrclk_ratio / mcasp->tdm_slots; - + if (mcasp->slot_width) { /* - * When we have more bclk then it is needed for the data, we - * need to use the rotation to move the received samples to have - * correct alignment. + * When we have more bclk then it is needed for the + * data, we need to use the rotation to move the + * received samples to have correct alignment. */ - rx_rotate = (slot_length - word_length) / 4; - word_length = slot_length; - } else if (mcasp->slot_width) { - rx_rotate = (mcasp->slot_width - word_length) / 4; - word_length = mcasp->slot_width; + slot_width = mcasp->slot_width; + rx_rotate = (slot_width - sample_width) / 4; }
/* mapping of the XSSZ bit-field as described in the datasheet */ - fmt = (word_length >> 1) - 1; + fmt = (slot_width >> 1) - 1;
if (mcasp->op_mode != DAVINCI_MCASP_DIT_MODE) { mcasp_mod_bits(mcasp, DAVINCI_MCASP_RXFMT_REG, RXSSZ(fmt),