This patch add Kconfig and Makefile to support SPEAr Audio driver
Signed-off-by: Rajeev Kumar rajeev-dlh.kumar@st.com --- sound/soc/spear/Kconfig | 40 ++++++++++++++++++++++++++++++++++++++++ sound/soc/spear/Makefile | 7 +++++++ 2 files changed, 47 insertions(+), 0 deletions(-) create mode 100644 sound/soc/spear/Kconfig create mode 100644 sound/soc/spear/Makefile
diff --git a/sound/soc/spear/Kconfig b/sound/soc/spear/Kconfig new file mode 100644 index 0000000..23529a2 --- /dev/null +++ b/sound/soc/spear/Kconfig @@ -0,0 +1,40 @@ +config SND_SPEAR_EVM + tristate "SoC Audio support for SPEAr EVM" + select SND_DESIGNWARE_I2S + select SND_SOC_STA529 + select SND_SPEAR_SOC + help + Say Y if you want to add support for SoC audio on SPEAr + platform + +config SND_SPEAR1340_EVM + tristate "SoC Audio support for SPEAr1340 EVM" + select SND_DESIGNWARE_I2S + select SND_SOC_STA529 + select SND_SPEAR_SPDIF_OUT + select SND_SPEAR_SPDIF_IN + select SND_SOC_SPDIF + select SND_SPEAR_SOC + help + Say Y if you want to add support for SoC audio on SPEAr1340 + platform + +config SND_SPEAR_SOC + tristate "SoC Audio for the ST chip" + depends on SND_DESIGNWARE_I2S || SND_SPEAR_SPDIF_OUT || \ + SND_SPEAR_SPDIF_IN + select SND_SOC_DMAENGINE_PCM + help + Say Y or M if you want to add support for any of the audio + controllers (I2S/SPDIF). You will also need to select + the audio interface codecs to support below. + +config SND_SPEAR_SPDIF_OUT + tristate "SPEAr SPDIF Out Device Driver" + help + Say Y or M if you want to add support for SPDIF OUT driver. + +config SND_SPEAR_SPDIF_IN + tristate "SPEAr SPDIF IN Device Driver" + help + Say Y or M if you want to add support for SPDIF IN driver. diff --git a/sound/soc/spear/Makefile b/sound/soc/spear/Makefile new file mode 100644 index 0000000..b365126 --- /dev/null +++ b/sound/soc/spear/Makefile @@ -0,0 +1,7 @@ +# SPEAR Platform Support +obj-$(CONFIG_SND_SPEAR_SOC) += spear_pcm.o +obj-$(CONFIG_SND_SPEAR_SPDIF_IN) += spdif_in.o +obj-$(CONFIG_SND_SPEAR_SPDIF_OUT) += spdif_out.o + +# SPEAR Machine Support +obj-$(CONFIG_SND_SPEAR_EVM) += spear_evb.o