On Sat, Jul 29, 2017 at 10:17 PM, codekipper@gmail.com wrote:
From: Marcus Cooper codekipper@gmail.com
The location of the mclk output enable bit is different on newer SoCs. Use a regmap field to enable it.
Signed-off-by: Marcus Cooper codekipper@gmail.com
sound/soc/sunxi/sun4i-i2s.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c index 90daa974bd27..6d8d2c4a675b 100644 --- a/sound/soc/sunxi/sun4i-i2s.c +++ b/sound/soc/sunxi/sun4i-i2s.c @@ -74,7 +74,7 @@ #define SUN4I_I2S_INT_STA_REG 0x20
#define SUN4I_I2S_CLK_DIV_REG 0x24 -#define SUN4I_I2S_CLK_DIV_MCLK_EN BIT(7) +#define SUN4I_I2S_CLK_DIV_MCLK_EN 7 #define SUN4I_I2S_CLK_DIV_BCLK_MASK GENMASK(6, 4) #define SUN4I_I2S_CLK_DIV_BCLK(bclk) ((bclk) << 4) #define SUN4I_I2S_CLK_DIV_MCLK_MASK GENMASK(3, 0) @@ -101,6 +101,7 @@
- @mclk_offset: Value by which mclkdiv needs to be adjusted.
- @bclk_offset: Value by which bclkdiv needs to be adjusted.
- @fmt_offset: Value by which wss and sr needs to be adjusted.
- @field_clkdiv_mclk_en: regmap field to enable mclk output.
- @field_fmt_set_wss: regmap field to set word select size.
- @field_fmt_set_sr: regmap field to set sample resolution.
- @field_fmt_set_bclk_polarity: regmap field to set clk polarity.
@@ -119,6 +120,7 @@ struct sun4i_i2s_quirks { unsigned int fmt_offset;
/* Register fields for i2s */
struct reg_field field_clkdiv_mclk_en; struct reg_field field_fmt_set_wss; struct reg_field field_fmt_set_sr; struct reg_field field_fmt_set_bclk_polarity;@@ -141,6 +143,7 @@ struct sun4i_i2s { struct snd_dmaengine_dai_dma_data playback_dma_data;
/* Register fields for i2s */
struct regmap_field *field_clkdiv_mclk_en; struct regmap_field *field_fmt_set_wss; struct regmap_field *field_fmt_set_sr; struct regmap_field *field_fmt_set_bclk_polarity;@@ -279,8 +282,9 @@ static int sun4i_i2s_set_clk_rate(struct sun4i_i2s *i2s,
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG, SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
SUN4I_I2S_CLK_DIV_MCLK(mclk_div) |SUN4I_I2S_CLK_DIV_MCLK_EN);
SUN4I_I2S_CLK_DIV_MCLK(mclk_div));regmap_field_write(i2s->field_clkdiv_mclk_en, 1); return 0;} @@ -710,6 +714,9 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = { .has_reset = false, .reg_offset_txdata = SUN4I_I2S_FIFO_TX_REG, .sun4i_i2s_regmap = &sun4i_i2s_regmap_config,
.field_clkdiv_mclk_en = REG_FIELD(SUN4I_I2S_CLK_DIV_REG,SUN4I_I2S_CLK_DIV_MCLK_EN,SUN4I_I2S_CLK_DIV_MCLK_EN),
Nit: just use raw number to match all the other lines. And you won't need to change the macro.
ChenYu