El mar 25, 2014 7:59 AM, "Boris BREZILLON" b.brezillon.dev@gmail.com escribió:
Hello Bo,
Le 25/03/2014 10:56, Bo Shen a écrit :
Enable WM8904 to support common clock framework.
- Now it supports use SoC provided clock or external oscillator as MCLK.
Signed-off-by: Bo Shen voice.shen@atmel.com
Documentation/devicetree/bindings/sound/wm8904.txt | 48 ++++++++++++++++++++++ sound/soc/codecs/wm8904.c | 17 ++++++++ 2 files changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/wm8904.txt
diff --git a/Documentation/devicetree/bindings/sound/wm8904.txt b/Documentation/devicetree/bindings/sound/wm8904.txt new file mode 100644 index 0000000..bcf4aa0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wm8904.txt @@ -0,0 +1,48 @@ +WM8904 audio CODEC
+This device supports I2C only.
+Required properties:
- compatible: "wlf,wm8904"
- reg: the I2C address of the device.
- clocks and clock-names: reference to
- <Documentation/devicetree/bindings/clock/clock-bindings.txt>
+Pins on the device (for linking into audio routes):
- IN1L
- IN1R
- IN2L
- IN2R
- IN3L
- IN3R
- HPOUTL
- HPOUTR
- LINEOUTL
- LINEOUTR
- MICBIAS
+Examples:
+1. Using SoC provided clock as mclk: +codec: wm8904@1a {
compatible = "wlf,wm8904";reg = <0x1a>;clocks = <&pck0>;clock-names = "mclk";+};
+2. Using external oscillator as mclk: +codec: wm8904@1a {
compatible = "wlf,wm8904";reg = <0x1a>;wm8904_osc {compatible = "fixed-clock";#clock-cells = <0>;#clock-frequency = <12000000>;}clocks = <&wm8904_osc>;clock-names = "mclk";+};
I think there is a misunderstanding here (and it certainly comes from my explanations during our last talk :)): both cases should be handled the same way because an external oscillator is no more or less than an external clk (we don't care how this clk is generated).
I suggested to put the osc node inside the wm8904 one but I thought you were trying to represent the internal 12MHz clk generated when using the fll free running mode.
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 49c35c3..4db6a26 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -11,6 +11,7 @@
- published by the Free Software Foundation.
*/ +#include <linux/clk.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> @@ -49,6 +50,7 @@ static const char *wm8904_supply_names[WM8904_NUM_SUPPLIES] = { /* codec private data */ struct wm8904_priv { struct regmap *regmap;
struct clk *mclk; enum wm8904_type devtype;snd_soc_codec *codec, switch (level) { case SND_SOC_BIAS_ON:
if (IS_ENABLED(CONFIG_COMMON_CLK))if (wm8904->mclk)clk_prepare_enable(wm8904->mclk); break; case SND_SOC_BIAS_PREPARE:@@ -1894,6 +1899,9 @@ static int wm8904_set_bias_level(struct snd_soc_codec *codec, regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
if (IS_ENABLED(CONFIG_COMMON_CLK))if (wm8904->mclk)clk_disable_unprepare(wm8904->mclk); break; } codec->dapm.bias_level = level;@@ -2139,6 +2147,15 @@ static int wm8904_i2c_probe(struct i2c_client *i2c, return ret; }
if (IS_ENABLED(CONFIG_COMMON_CLK)) {wm8904->mclk = devm_clk_get(&i2c->dev, "mclk");if (IS_ERR(wm8904->mclk)) {dev_err(&i2c->dev, "Failed to get MCLK\n");ret = PTR_ERR(wm8904->mclk);goto err_enable;}}ret = regmap_read(wm8904->regmap, WM8904_SW_RESET_AND_ID, &val); if (ret < 0) { dev_err(&i2c->dev, "Failed to read ID register: %d\n",ret);
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel