Re: [PATCH v5 1/2] platform/x86: dell-privacy: Add support for Dell hardware privacy

Hi,

On 3/24/21 12:19 PM, Hans de Goede wrote:

Hi,

On 3/22/21 10:38 AM, Perry Yuan wrote:

...

From: Perry Yuan perry_yuan@dell.com

add support for Dell privacy driver for the Dell units equipped hardware privacy design, which protect users privacy of audio and camera from hardware level. Once the audio or camera privacy mode activated, any applications will not get any audio or video stream when user pressed ctrl+F4 hotkey, audio privacy mode will be enabled, micmute led will be also changed accordingly The micmute led is fully controlled by hardware & EC(embedded controller) and camera mute hotkey is Ctrl+F9. Currently design only emmits SW_CAMERA_LENS_COVER event while the camera lens shutter will be changed by EC & hw(hadware) control

*The flow is like this:

1. User presses key. HW does stuff with this key (timeout timer is started)
2. WMI event is emitted from BIOS to kernel
3. WMI event is received by dell-privacy
4. KEY_MICMUTE emitted from dell-privacy
5. Userland picks up key and modifies kcontrol for SW mute
6. Codec kernel driver catches and calls ledtrig_audio_set, like this: ledtrig_audio_set(LED_AUDIO_MICMUTE, rt715->micmute_led ? LED_ON :LED_OFF);
7. If "LED" is set to on dell-privacy notifies EC, and timeout is cancelled, HW mic mute activated.

Signed-off-by: Perry Yuan perry_yuan@dell.com

One last remark, I think that the dell_privacy_present() function which I suggested in my review should be renamed to:

dell_privacy_has_micmute() and then its return should check the micmute feature bit in priv->features_present and this new function should then be used in dell-laptop.c to determine it dell-laptop.c should register its own mic-mute led_classdev.

This way if a theoretical future laptop shows up where the micmute feature is not implemented by the privacy interface dell-laptop.c will still register the non-privacy mic-mute led_classdev.

Regards,

Hans

...

---

v4 -> v5:

• addressed feedback from Randy Dunlap
• addressed feedback from Pierre-Louis Bossart
• rebase to latest 5.12 rc4 upstream kernel
• fix some space alignment problem

v3 -> v4:

• fix format for Kconfig
• add sysfs document
• add flow comments to the privacy wmi/acpi driver
• addressed feedback from Barnabás Pőcze[Thanks very much]
• export privacy_valid to make the global state simpler to query
• fix one issue which will block the dell-laptop driver to load when privacy driver invalid
• addressed feedback from Pierre-Louis Bossart,remove the EC ID match

v2 -> v3:

• add sysfs attributes doc

v1 -> v2:

• query EC handle from EC driver directly.
• fix some code style.
• add KEY_END to keymap array.
• clean platform device when cleanup called
• use hexadecimal format for log print in dev_dbg
• remove __set_bit for the report keys from probe.
• fix keymap leak
• add err_free_keymap in dell_privacy_wmi_probe
• wmi driver will be unregistered if privacy_acpi_init() fails
• add sysfs attribute files for user space query.
• add leds micmute driver to privacy acpi
• add more design info the commit info

---

---

.../testing/sysfs-platform-dell-privacy-wmi | 32 ++ drivers/platform/x86/dell/Kconfig | 16 + drivers/platform/x86/dell/Makefile | 3 + drivers/platform/x86/dell/dell-laptop.c | 23 +- drivers/platform/x86/dell/dell-privacy-acpi.c | 164 +++++++++ drivers/platform/x86/dell/dell-privacy-wmi.c | 340 ++++++++++++++++++ drivers/platform/x86/dell/dell-privacy-wmi.h | 35 ++ drivers/platform/x86/dell/dell-wmi.c | 27 +- 8 files changed, 627 insertions(+), 13 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi create mode 100644 drivers/platform/x86/dell/dell-privacy-acpi.c create mode 100644 drivers/platform/x86/dell/dell-privacy-wmi.c create mode 100644 drivers/platform/x86/dell/dell-privacy-wmi.h

diff --git a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi new file mode 100644 index 000000000000..20c15a51ec38 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi @@ -0,0 +1,32 @@ +What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/devices_supported +Date: Feb 2021 +KernelVersion: 5.12 +Contact: "perry.yuan@dell.com>" +Description:

• Display which dell hardware level privacy devices are supported
  

• “Dell Privacy” is a set of HW, FW, and SW features to enhance
  

• Dell’s commitment to platform privacy for MIC, Camera, and
  

• ePrivacy screens.
  

• The supported hardware privacy devices are:
  

• - 0 = Not Supported
  

• - 1 = Supported
  

• - Bit0 -> Microphone
  

• - Bit1 -> Camera
  

• - Bit2 -> ePrivacy Screen
  

+What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/current_state +Date: Feb 2021 +KernelVersion: 5.12 +Contact: "perry.yuan@dell.com>" +Description:

• Allow user space to check current dell privacy device state.
  

• Describes the Device State class exposed by BIOS which can be
  

• consumed by various applications interested in knowing the Privacy
  

• feature capabilities
  

• There are three Bits for available states:
  

• - 0 = Enabled
  

• - 1 = Disabled
  

What is the definition of enabled/disabled ? Does enabled mean that the device is enabled, or that the device is in privacy mode, so in case of the microphone it is actually disabled (muted) ?

...

• - Bit0 -> Microphone
  

• - Bit1 -> Camera
  

• - Bit2 -> ePrivacyScreen
  

Normally we would use strings for something like this and not direclty export a bitfield, this would also allow avoiding the enabled / disabled ambiguity

E.g. you could have the following:

# supported devices $ cat /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/devices_supported Microphone Mute Camera Shutter ePrivacyScreen

# All devices in privacy mode: $ cat /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/current_state Microphone muted Camera Shutter closed ePrivacyScreen privacy-filter enabled

# All devices in non-privacy mode:

$ cat /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/current_state Microphone unmuted Camera Shutter open ePrivacyScreen privacy-filter disabled

You can easily do the bitfield -> string mapping in the kernel by having 3 string arrays (support, privacy_on, privacy_off) indexed by the bitfield indices.

...

diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig index e0a55337f51a..0e0f1eb35bd6 100644 --- a/drivers/platform/x86/dell/Kconfig +++ b/drivers/platform/x86/dell/Kconfig @@ -204,4 +204,20 @@ config DELL_WMI_SYSMAN To compile this driver as a module, choose M here: the module will be called dell-wmi-sysman.

+config DELL_PRIVACY

• tristate "Dell Hardware Privacy Support"
• depends on ACPI
• depends on ACPI_WMI
• depends on INPUT
• depends on DELL_LAPTOP
• depends on LEDS_TRIGGER_AUDIO
• select DELL_WMI
• help

•  This driver provides support for the "Dell Hardware Privacy" feature
  

•  of Dell laptops.
  

•  Support for a micmute and camera mute privacy will be provided as
  

•  hardware button Ctrl+F4 and Ctrl+F9 hotkey.
  

This suggests that that the driver implements the buttons, which is not the case. How about:

 This driver provides integration with the "Dell Hardware Privacy" feature
 of Dell laptops.

...

•  To compile this driver as a module, choose M here: the module will
  

•  be called dell_privacy.
  

endif # X86_PLATFORM_DRIVERS_DELL diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile index d720a3e42ae3..8b0883ee9412 100644 --- a/drivers/platform/x86/dell/Makefile +++ b/drivers/platform/x86/dell/Makefile @@ -19,3 +19,6 @@ obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o obj-$(CONFIG_DELL_WMI_DESCRIPTOR) += dell-wmi-descriptor.o obj-$(CONFIG_DELL_WMI_LED) += dell-wmi-led.o obj-$(CONFIG_DELL_WMI_SYSMAN) += dell-wmi-sysman/ +obj-$(CONFIG_DELL_PRIVACY) += dell-privacy.o +dell-privacy-objs := dell-privacy-wmi.o \

•                                   dell-privacy-acpi.o
  

diff --git a/drivers/platform/x86/dell/dell-laptop.c b/drivers/platform/x86/dell/dell-laptop.c index 70edc5bb3a14..4c840ab6cb59 100644 --- a/drivers/platform/x86/dell/dell-laptop.c +++ b/drivers/platform/x86/dell/dell-laptop.c @@ -31,6 +31,8 @@ #include "dell-rbtn.h" #include "dell-smbios.h"

+#include "dell-privacy-wmi.h"

struct quirk_entry { bool touchpad_led; bool kbd_led_not_present; @@ -90,6 +92,7 @@ static struct rfkill *wifi_rfkill; static struct rfkill *bluetooth_rfkill; static struct rfkill *wwan_rfkill; static bool force_rfkill; +static bool has_privacy;

module_param(force_rfkill, bool, 0444); MODULE_PARM_DESC(force_rfkill, "enable rfkill on non whitelisted models"); @@ -2206,10 +2209,16 @@ static int __init dell_init(void)

if (dell_smbios_find_token(GLOBAL_MIC_MUTE_DISABLE) && dell_smbios_find_token(GLOBAL_MIC_MUTE_ENABLE)) {

• micmute_led_cdev.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE);
  

• ret = led_classdev_register(&platform_device->dev, &micmute_led_cdev);
  

• if (ret < 0)
  

• 	goto fail_led;
  

• if (!privacy_valid)
  

This privacy_valid variable is coming from another module, so you're adding a "privacy_valid" symbol to the global kernel symbol namespace, even though this is dell specific. Please use the dell_privacy_present() function (see below) instead, so you get:

if (dell_privacy_present())
	has_privacy = true;
else
	has_privacy = false;

Which makes much more sense then "if (!privacy_valid) has_privacy = true;" which feels as if it is inverted to what it should be.

...

• 	has_privacy = true;
  

• else
  

• 	has_privacy = false;
  

• if (!has_privacy) {
  

• 	micmute_led_cdev.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE);
  

• 	ret = led_classdev_register(&platform_device->dev, &micmute_led_cdev);
  

• 	if (ret < 0)
  

• 		goto fail_led;
  

• }
  

  }

  if (acpi_video_get_backlight_type() != acpi_backlight_vendor)

@@ -2257,7 +2266,8 @@ static int __init dell_init(void) fail_get_brightness: backlight_device_unregister(dell_backlight_device); fail_backlight:

• led_classdev_unregister(&micmute_led_cdev);

• if (!has_privacy)

• led_classdev_unregister(&micmute_led_cdev);
  

fail_led: dell_cleanup_rfkill(); fail_rfkill: @@ -2278,7 +2288,8 @@ static void __exit dell_exit(void) touchpad_led_exit(); kbd_led_exit(); backlight_device_unregister(dell_backlight_device);

• led_classdev_unregister(&micmute_led_cdev);

• if (!has_privacy)

• led_classdev_unregister(&micmute_led_cdev);
  

  dell_cleanup_rfkill(); if (platform_device) { platform_device_unregister(platform_device);

diff --git a/drivers/platform/x86/dell/dell-privacy-acpi.c b/drivers/platform/x86/dell/dell-privacy-acpi.c new file mode 100644 index 000000000000..4c785b62c7c4 --- /dev/null +++ b/drivers/platform/x86/dell/dell-privacy-acpi.c @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-only +/*

• • Dell privacy notification driver
• • Copyright (C) 2021 Dell Inc. All Rights Reserved.
• */

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

+#include <linux/acpi.h> +#include <linux/bits.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/string.h> +#include <linux/sysfs.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/wmi.h>

+#include "dell-privacy-wmi.h"

+#define PRIVACY_PLATFORM_NAME "dell-privacy-acpi" +#define DELL_PRIVACY_GUID "6932965F-1671-4CEB-B988-D3AB0A901919"

+struct privacy_acpi_priv {

• struct device *dev;
• struct platform_device *platform_device;
• struct led_classdev cdev;

+}; +static struct privacy_acpi_priv *privacy_acpi;

+static int dell_privacy_micmute_led_set(struct led_classdev *led_cdev,

• enum led_brightness brightness)
  

+{

• struct privacy_acpi_priv *priv = privacy_acpi;

Please use container_of on the passed in led_cdev here instead of relying on a global variable.

...

• acpi_status status;
• acpi_handle handle;
• static char *acpi_method = (char *)"ECAK";
• handle = ec_get_handle();
• if (!handle)

• return -EIO;
  

• if (!acpi_has_method(handle, acpi_method))

• return -EIO;
  

• status = acpi_evaluate_object(handle, acpi_method, NULL, NULL);
• if (ACPI_FAILURE(status)) {

• dev_err(priv->dev, "Error setting privacy EC ack value: %s\n",
  

• 		acpi_format_exception(status));
  

• return -EIO;
  

• }
• pr_debug("set dell privacy micmute ec ack event done\n");
• return 0;

+}

+static int dell_privacy_acpi_remove(struct platform_device *pdev) +{

• struct privacy_acpi_priv *priv = dev_get_drvdata(privacy_acpi->dev);
• led_classdev_unregister(&priv->cdev);
• return 0;

+} +/*

• • Pressing the mute key activates a time delayed circuit to physically cut
• • off the mute. The LED is in the same circuit, so it reflects the true
• • state of the HW mute. The reason for the EC "ack" is so that software
• • can first invoke a SW mute before the HW circuit is cut off. Without SW
• • cutting this off first does not affect the time delayed muting or status
• • of the LED but there is a possibility of a "popping" noise.
• • If the EC receives the SW ack, the circuit will be activated before the
• • delay completed.
• • Exposing as an LED device allows the codec drivers notification path to
• • EC ACK to work
• */

+static int dell_privacy_leds_setup(struct device *dev) +{

• struct privacy_acpi_priv *priv = dev_get_drvdata(dev);
• int ret = 0;
• priv->cdev.name = "dell-privacy::micmute";
• priv->cdev.max_brightness = 1;
• priv->cdev.brightness_set_blocking = dell_privacy_micmute_led_set;
• priv->cdev.default_trigger = "audio-micmute";
• priv->cdev.brightness = ledtrig_audio_get(LED_AUDIO_MICMUTE);
• ret = devm_led_classdev_register(dev, &priv->cdev);
• if (ret)

• return ret;
  

• return 0;

+}

+static int dell_privacy_acpi_probe(struct platform_device *pdev) +{

• int ret;
• platform_set_drvdata(pdev, privacy_acpi);
• privacy_acpi->dev = &pdev->dev;
• privacy_acpi->platform_device = pdev;
• ret = dell_privacy_leds_setup(&pdev->dev);
• if (ret)

• return -EIO;
  

• return 0;

+}

+static struct platform_driver dell_privacy_platform_drv = {

• .driver = {

• .name = PRIVACY_PLATFORM_NAME,
  

• },
• .probe = dell_privacy_acpi_probe,
• .remove = dell_privacy_acpi_remove,

+};

+int __init dell_privacy_acpi_init(void) +{

• int err;
• struct platform_device *pdev;
• if (!wmi_has_guid(DELL_PRIVACY_GUID))

• return -ENODEV;
  

• privacy_acpi = kzalloc(sizeof(*privacy_acpi), GFP_KERNEL);
• if (!privacy_acpi)

• return -ENOMEM;
  

• err = platform_driver_register(&dell_privacy_platform_drv);
• if (err)

• goto pdrv_err;
  

• pdev = platform_device_register_simple(

• 	PRIVACY_PLATFORM_NAME, PLATFORM_DEVID_NONE, NULL, 0);
  

• if (IS_ERR(pdev)) {

• err = PTR_ERR(pdev);
  

• goto pdev_err;
  

• }

So you're creating a platform_device here, from code called from the init_dell_privacy() function in dell-privacy-wmi.c, just so that the probe() function for that platform-device can register the led_classdev for the (alternative) mute LED.

Please just put the cdev struct inside struct privacy_wmi_data and call dell_privacy_leds_setup() with the wmi-dev as parameter from dell_privacy_wmi_probe and have the wmi-dev as the parent of the led_classdev.

This allows removing both the platform-driver and the instantiation of the platform-device.

After removing the unnecessary platfrom-dev/driver there will be so little left of dell-privacy-acpi.c, that what remains can and should just be folded into dell-privacy-wmi.c. At which point you're down to one file for the module which also simplifies the Makefile.

...

• return 0;

+pdev_err:

• platform_device_unregister(pdev);

+pdrv_err:

• kfree(privacy_acpi);
• return err;

+}

+void __exit dell_privacy_acpi_exit(void) +{

• struct platform_device *pdev = to_platform_device(privacy_acpi->dev);
• platform_device_unregister(pdev);
• platform_driver_unregister(&dell_privacy_platform_drv);
• kfree(privacy_acpi);

+}

+MODULE_AUTHOR("Perry Yuan perry_yuan@dell.com"); +MODULE_DESCRIPTION("DELL Privacy ACPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/dell/dell-privacy-wmi.c b/drivers/platform/x86/dell/dell-privacy-wmi.c new file mode 100644 index 000000000000..8bde97613477 --- /dev/null +++ b/drivers/platform/x86/dell/dell-privacy-wmi.c @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0-only +/*

• • Dell privacy notification driver
• • Copyright (C) 2021 Dell Inc. All Rights Reserved.
• */

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

+#include <linux/acpi.h> +#include <linux/input.h> +#include <linux/input/sparse-keymap.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/wmi.h>

+#include "dell-privacy-wmi.h"

+#define DELL_PRIVACY_GUID "6932965F-1671-4CEB-B988-D3AB0A901919" +#define MICROPHONE_STATUS BIT(0) +#define CAMERA_STATUS BIT(1) +#define PRIVACY_SCREEN_STATUS BIT(2)

+/*

• • The wmi_list is used to store the privacy_priv struct with mutex protecting
• */

+static LIST_HEAD(wmi_list); +static DEFINE_MUTEX(list_mutex); +/*

• • global privacy state for other modules to query if the privacy driver loaded successfully
• • or no privacy WMI device was detected at initial probe phase
• */

+int privacy_valid = -EPROBE_DEFER; +EXPORT_SYMBOL_GPL(privacy_valid);

None of the callers are interpreting the error-codes stored here. So this is really treated as a bool, and the info stored in the bool is already available inside the wmi_list-head. So just drop this.

...

+struct privacy_wmi_data {

• struct input_dev *input_dev;
• struct wmi_device *wdev;
• struct list_head list;
• u32 features_present;
• u32 last_status;

+};

+/*

• • Keymap for WMI privacy events of type 0x0012
• */

+static const struct key_entry dell_wmi_keymap_type_0012[] = {

• /* privacy mic mute */
• { KE_KEY, 0x0001, { KEY_MICMUTE } },
• /* privacy camera mute */
• { KE_SW, 0x0002, { SW_CAMERA_LENS_COVER } },
• { KE_END, 0},

+};

+int dell_privacy_state(void)

Please rename this to dell_privacy_present(), "state" is very generic / not descriptive and use list_first_entry_or_null(&wmi_list) as done in dell_privacy_process_event(), e.g.:

bool dell_privacy_present(void) { struct privacy_wmi_data *priv;

mutex_lock(&list_mutex); priv = list_first_entry_or_null(&wmi_list, struct privacy_wmi_data, list); mutex_unlock(&list_mutex);

return priv; }

...

+{

• return privacy_valid;

+} +EXPORT_SYMBOL_GPL(dell_privacy_state); +/*

• • The flow of privacy event:
• • 1. User presses key. HW does stuff with this key (timeout is started)
• • 2. WMI event is emitted from BIOS
• • 3. WMI event is received by dell-privacy
• • 4. KEY_MICMUTE emitted from dell-privacy
• • 5. Userland picks up key and modifies kcontrol for SW mute
• • 6. Codec kernel driver catches and calls ledtrig_audio_set defined by
• • dell-privacy-acpi driver.
• • codec driver will call like this to switch micmute led state.
• • ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led ? LED_ON :LED_OFF);
• • 7. If "LED" is set to on dell-privacy notifies EC,and timeout is cancelled,
• • HW mic mute activated.
• */

+void dell_privacy_process_event(int type, int code, int status)

Please make this return a bool, returning true when it has consumed the event and false when it did not consume the event. This will allow other 0x0012 0xXXXX codes to still be handled by the existing dell-wmi.c code for this.

...

+{

• struct privacy_wmi_data *priv;
• const struct key_entry *key;

bool ret = false;

...

• mutex_lock(&list_mutex);
• priv = list_first_entry_or_null(&wmi_list,

• 	struct privacy_wmi_data,
  

• 	list);
  

• if (!priv) {

• pr_err("dell privacy priv is NULL\n");
  

• goto error;
  

• }
• key = sparse_keymap_entry_from_scancode(priv->input_dev, (type << 16) | code);
• if (!key) {

• dev_dbg(&priv->wdev->dev, "Unknown key with type 0x%04x and code 0x%04x pressed\n",
  

• 		type, code);
  

• goto error;
  

• }
• switch (code) {
• case DELL_PRIVACY_TYPE_AUDIO: /* Mic mute */

• priv->last_status = status;
  

• sparse_keymap_report_entry(priv->input_dev, key, 1, true);
  

ret = true;

...

• break;
  

• case DELL_PRIVACY_TYPE_CAMERA: /* Camera mute */

• priv->last_status = status;
  

• sparse_keymap_report_entry(priv->input_dev, key, 1, true);
  

ret = true;

...

• break;
  

These 2 cases are exactly the same, please merge them into a single case.

...

• default:

• dev_dbg(&priv->wdev->dev, "unknown event type 0x%04x 0x%04x",
  

• 		type, code);
  

• }

+error:

• mutex_unlock(&list_mutex);

return ret;

...

+} +EXPORT_SYMBOL_GPL(dell_privacy_process_event);

+static ssize_t devices_supported_show(struct device *dev,

• struct device_attribute *attr,
  

• char *buf)
  

+{

• struct privacy_wmi_data *priv = dev_get_drvdata(dev);
• return sysfs_emit(buf, "%x\n", priv->features_present);

+}

+static ssize_t current_state_show(struct device *dev,

• struct device_attribute *attr,
  

• char *buf)
  

+{

• struct privacy_wmi_data *priv = dev_get_drvdata(dev);
• return sysfs_emit(buf, "%x\n", priv->last_status);

+}

Please change these to emit strings as discussed above (assuming you agree with my above proposal for this).

...

+static DEVICE_ATTR_RO(devices_supported); +static DEVICE_ATTR_RO(current_state);

+static struct attribute *privacy_attributes[] = {

• &dev_attr_devices_supported.attr,
• &dev_attr_current_state.attr,
• NULL,

+};

+static const struct attribute_group privacy_attribute_group = {

• .attrs = privacy_attributes

+};

+/*

• • Describes the Device State class exposed by BIOS which can be consumed by
• • various applications interested in knowing the Privacy feature capabilities.
• • class DeviceState
• • {
• • [key, read] string InstanceName;
• • [read] boolean ReadOnly;
• • [WmiDataId(1), read] uint32 DevicesSupported;
• • 0 – None, 0x1 – Microphone, 0x2 – Camera, 0x4 -ePrivacy Screen
• • [WmiDataId(2), read] uint32 CurrentState;
• • 0:Off; 1:On. Bit0 – Microphone, Bit1 – Camera, Bit2 - ePrivacyScreen
• • };
• */

+static int get_current_status(struct wmi_device *wdev) +{

• struct privacy_wmi_data *priv = dev_get_drvdata(&wdev->dev);
• union acpi_object *obj_present;
• u32 *buffer;
• int ret = 0;
• if (!priv) {

• pr_err("dell privacy priv is NULL\n");
  

• return -EINVAL;
  

• }
• /* check privacy support features and device states */
• obj_present = wmidev_block_query(wdev, 0);
• if (!obj_present) {

• dev_err(&wdev->dev, "failed to read Binary MOF\n");
  

• ret = -EIO;
  

• privacy_valid = ret;
  

• return ret;
  

• }
• if (obj_present->type != ACPI_TYPE_BUFFER) {

• dev_err(&wdev->dev, "Binary MOF is not a buffer!\n");
  

• ret = -EIO;
  

• privacy_valid = ret;
  

• goto obj_free;
  

• }
• /* Although it's not technically a failure, this would lead to

• *  unexpected behavior
  

• */
  

• if (obj_present->buffer.length != 8) {

• dev_err(&wdev->dev, "Dell privacy buffer has unexpected length (%d)!\n",
  

• 		obj_present->buffer.length);
  

• ret = -EINVAL;
  

• privacy_valid = ret;
  

• goto obj_free;
  

• }
• buffer = (u32 *)obj_present->buffer.pointer;
• priv->features_present = buffer[0];
• priv->last_status = buffer[1];
• privacy_valid = 0;

As discussed, there is no need for the privacy_valid variable, remove all references to it here.

...

+obj_free:

• kfree(obj_present);
• return ret;

+}

+static int dell_privacy_wmi_probe(struct wmi_device *wdev, const void *context) +{

• struct privacy_wmi_data *priv;
• struct key_entry *keymap;
• int ret, i;
• priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
• if (!priv)

• return -ENOMEM;
  

• dev_set_drvdata(&wdev->dev, priv);
• priv->wdev = wdev;
• /* create evdev passing interface */
• priv->input_dev = devm_input_allocate_device(&wdev->dev);
• if (!priv->input_dev)

• return -ENOMEM;
  

• /* remap the wmi keymap event to new keymap */
• keymap = kcalloc(ARRAY_SIZE(dell_wmi_keymap_type_0012),

• 	sizeof(struct key_entry), GFP_KERNEL);
  

• if (!keymap) {

• ret = -ENOMEM;
  

• goto err_free_dev;
  

• }

No need for the goto here just simplify this to:

if (!keymap) return -ENOMEM;

...

• /* remap the keymap code with Dell privacy key type 0x12 as prefix

• * KEY_MICMUTE scancode will be reported as 0x120001
  

• */
  

• for (i = 0; i < ARRAY_SIZE(dell_wmi_keymap_type_0012); i++) {

• keymap[i] = dell_wmi_keymap_type_0012[i];
  

• keymap[i].code |= (0x0012 << 16);
  

• }
• ret = sparse_keymap_setup(priv->input_dev, keymap, NULL);

You're done with the keymap here, please put a single:

kfree(keymap);

Here before the if (ret), then you won't need any goto style cleanup anywhere in this function.

This also fixes not free-ing the keymap when sparse_keymap_setup() fails.

...

• if (ret)

• return ret;
  

• priv->input_dev->dev.parent = &wdev->dev;
• priv->input_dev->name = "Dell Privacy Driver";
• priv->input_dev->id.bustype = BUS_HOST;
• if (input_register_device(priv->input_dev)) {

• pr_debug("input_register_device failed to register!\n");
  

You're not setting ret here.

...

• goto err_free_keymap;
  

• }

No need for the pr_debug, the kernel will already complain if this fails. Also since all your resources are devm managed and we've already taken care of the keymap this can be simplified to:

ret = input_register_device(priv->input_dev); if (ret) returm ret;

...

• mutex_lock(&list_mutex);
• list_add_tail(&priv->list, &wmi_list);
• mutex_unlock(&list_mutex);

Move this to directly above the return 0; below, see below.

...

• if (get_current_status(priv->wdev))

• goto err_free_input;
  

You're again not setting ret here before the goto.

And you are returning with an error here after adding the device to the wmi_list, the list_add_tail call should be done last, directly above the return 0 call.

Also since all your resources are devm managed and we've already taken care of the keymap this can be simplified to:

ret = get_current_status(priv->wdev); if (ret) return ret;

...

• ret = devm_device_add_group(&wdev->dev, &privacy_attribute_group);
• if (ret)

• goto err_free_input;
  

Replace the goto err_free_input() with return ret;

...

• kfree(keymap);

Drop this kfree() (already done above now).

Move the list_add_tail() here.

...

• return 0;

+err_free_input:

• input_unregister_device(priv->input_dev);

This is not necessary for an input_device allocated with devm_input_allocate_device(), which means that none of these error handling labels are necessary now, so this can all be removed.

...

+err_free_keymap:

• privacy_valid = -ENODEV;
• kfree(keymap);

+err_free_dev:

• return ret;

+}

+static int dell_privacy_wmi_remove(struct wmi_device *wdev) +{

• struct privacy_wmi_data *priv = dev_get_drvdata(&wdev->dev);
• mutex_lock(&list_mutex);
• list_del(&priv->list);
• mutex_unlock(&list_mutex);
• privacy_valid = -ENODEV;
• input_unregister_device(priv->input_dev);

The input_unregister is not necessary (and privacy_valid is gone too).

...

• return 0;

+}

+static const struct wmi_device_id dell_wmi_privacy_wmi_id_table[] = {

• { .guid_string = DELL_PRIVACY_GUID },
• { },

+};

+static struct wmi_driver dell_privacy_wmi_driver = {

• .driver = {

• .name = "dell-privacy",
  

• },
• .probe = dell_privacy_wmi_probe,
• .remove = dell_privacy_wmi_remove,
• .id_table = dell_wmi_privacy_wmi_id_table,

+};

+static int __init init_dell_privacy(void) +{

• int ret;
• ret = wmi_has_guid(DELL_PRIVACY_GUID);> + if (!ret) {

• privacy_valid = -ENODEV;
  

• pr_debug("Unable to detect available Dell privacy devices: %d\n", ret);
  

• return privacy_valid;
  

• }

This driver will only get modprobed if the GUID is present and when it is not present then loading the driver is a no-op so this can be checked.

...

• ret = wmi_driver_register(&dell_privacy_wmi_driver);
• if (ret) {

• pr_err("failed to initialize privacy wmi driver: %d\n", ret);
  

• return ret;
  

• }
• ret = dell_privacy_acpi_init();
• if (ret) {

• pr_err("failed to initialize privacy acpi driver: %d\n", ret);
  

• goto err_init;
  

• }

And with the platform-device/driver removed this is not necessary too, which means ...

...

• return 0;

+err_init:

• wmi_driver_unregister(&dell_privacy_wmi_driver);
• return ret;

+}

+static void dell_privacy_wmi_exit(void) +{

• wmi_driver_unregister(&dell_privacy_wmi_driver);

+}

+static void __exit exit_dell_privacy(void) +{

• dell_privacy_wmi_exit();
• dell_privacy_acpi_exit();

+}

+module_init(init_dell_privacy); +module_exit(exit_dell_privacy);

That all of the init_dell_privacy / exit_dell_privacy stuff can be replaced with a single line:

module_wmi_driver(&dell_privacy_wmi_driver);

...

+MODULE_DEVICE_TABLE(wmi, dell_wmi_privacy_wmi_id_table); +MODULE_AUTHOR("Perry Yuan perry_yuan@dell.com"); +MODULE_DESCRIPTION("Dell Privacy WMI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/dell/dell-privacy-wmi.h b/drivers/platform/x86/dell/dell-privacy-wmi.h new file mode 100644 index 000000000000..6dda2990df5d --- /dev/null +++ b/drivers/platform/x86/dell/dell-privacy-wmi.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/*

• • Dell privacy notification driver
• • Copyright (C) 2021 Dell Inc. All Rights Reserved.
• */

+#ifndef _DELL_PRIVACY_WMI_H_ +#define _DELL_PRIVACY_WMI_H_

+#if IS_ENABLED(CONFIG_DELL_PRIVACY) +extern int privacy_valid;

Please remove this from the global kernel namespace (make it a static global inside the dell-privacy-wmi.c code).

...

+int dell_privacy_state(void); +void dell_privacy_process_event(int type, int code, int status); +#else /* CONFIG_DELL_PRIVACY */ +int privacy_valid = -ENODEV;

Drop this.

...

+static inline int dell_privacy_state(void) +{

• return privacy_valid;

And directly return -ENODEV here.

...

+}

+static inline void dell_privacy_process_event(int type, int code, int status) +{} +#endif /* CONFIG_DELL_PRIVACY */

+int dell_privacy_acpi_init(void); +void dell_privacy_acpi_exit(void);

+/* DELL Privacy Type */ +enum {

• DELL_PRIVACY_TYPE_UNKNOWN = 0x0,
• DELL_PRIVACY_TYPE_AUDIO,
• DELL_PRIVACY_TYPE_CAMERA,

+};

This enum is only used inside dell-privacy-wmi.c, please move it there.

...

+#endif

With the platform-device/driver removal discussed above all this header file needs to do is defines the prototypes / stubs for 2 functions:

int dell_privacy_state(void); void dell_privacy_process_event(int type, int code, int status);

I think it would be best to just add these to dell-smbios.h, rather then adding a new header just for these 2 prototypes / stubs.

...

diff --git a/drivers/platform/x86/dell/dell-wmi.c b/drivers/platform/x86/dell/dell-wmi.c index bbdb3e860892..389e86de24b0 100644 --- a/drivers/platform/x86/dell/dell-wmi.c +++ b/drivers/platform/x86/dell/dell-wmi.c @@ -13,20 +13,22 @@

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

-#include <linux/kernel.h> -#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/dmi.h> #include <linux/init.h> -#include <linux/slab.h> -#include <linux/types.h> #include <linux/input.h> #include <linux/input/sparse-keymap.h> -#include <linux/acpi.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> #include <linux/string.h> -#include <linux/dmi.h> +#include <linux/types.h> #include <linux/wmi.h> #include <acpi/video.h>

Please split the changes sorting these includes alphabetically out into a separate cleanup patch.

...

#include "dell-smbios.h" #include "dell-wmi-descriptor.h" +#include "dell-privacy-wmi.h"

MODULE_AUTHOR("Matthew Garrett mjg@redhat.com"); MODULE_AUTHOR("Pali Rohár pali@kernel.org"); @@ -381,6 +383,7 @@ static void dell_wmi_notify(struct wmi_device *wdev, u16 *buffer_entry, *buffer_end; acpi_size buffer_size; int len, i;

• int err;

Drop this.

...

if (obj->type != ACPI_TYPE_BUFFER) { pr_warn("bad response type %x\n", obj->type); @@ -427,7 +430,6 @@ static void dell_wmi_notify(struct wmi_device *wdev,

switch (buffer_entry[1]) {
case 0x0000: /* One key pressed or event occurred */

• case 0x0012: /* Event with extended data occurred */
  if (len > 2)
  	dell_wmi_process_key(wdev, buffer_entry[1],
  			     buffer_entry[2]);
  

@@ -439,6 +441,17 @@ static void dell_wmi_notify(struct wmi_device *wdev, dell_wmi_process_key(wdev, buffer_entry[1], buffer_entry[i]); break;

• case 0x0012:
  

• 	err = dell_privacy_state();
  

• 	if (err == 0) {
  

• 		dell_privacy_process_event(buffer_entry[1],
  

• 					   buffer_entry[3], buffer_entry[4]);
  

This needs a len > 4 check !

...

• 	} else {
  

• 		if (len > 2)
  

• 			dell_wmi_process_key(wdev, buffer_entry[1],
  

• 					     buffer_entry[2]);
  

• 	}
  

Combined with the change to have dell_privacy_process_event() return a bool, this should look something like this:

	if (len > 4 && dell_privacy_process_event(buffer_entry[1], buffer_entry[3], buffer_entry[4]))
		; /* Handled by dell_privacy_process_event() */
	else if (len > 2)
		dell_wmi_process_key(wdev, buffer_entry[1], buffer_entry[2]);

...

• 	break;
  

  default: /* Unknown event */ pr_info("Unknown WMI event type 0x%x\n", (int)buffer_entry[1]);

Regards,

Hans