At Sun, 22 Nov 2009 17:23:45 +0100, Krzysztof Helt wrote:
From: Krzysztof Helt krzysztof.h1@wp.pl
Move the miro.h header to the include/sound directory. It can be used in the Miro PCM20 radio driver (v4l).
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl
This is a part of my effort to restore the PCM20's radio driver.
OK, I applied both patches now. But, I'm not going to push these for 2.6.33 since it's fairly late for any new stuff, especially if it's a cross-subsystem one.
The changes are tracked on the master branch of sound git tree, so don't worry.
Thanks!
Takashi
include/sound/aci.h | 73 ++++++++++++++++++++++++++++++++++++++++++++++ sound/isa/opti9xx/miro.c | 2 +- sound/isa/opti9xx/miro.h | 73 ---------------------------------------------- 3 files changed, 74 insertions(+), 74 deletions(-) create mode 100644 include/sound/aci.h delete mode 100644 sound/isa/opti9xx/miro.h
diff --git a/include/sound/aci.h b/include/sound/aci.h new file mode 100644 index 0000000..bb796d0 --- /dev/null +++ b/include/sound/aci.h @@ -0,0 +1,73 @@ +#ifndef _ACI_H_ +#define _ACI_H_
+#define ACI_REG_COMMAND 0 /* write register offset */ +#define ACI_REG_STATUS 1 /* read register offset */ +#define ACI_REG_BUSY 2 /* busy register offset */ +#define ACI_REG_RDS 2 /* PCM20: RDS register offset */ +#define ACI_MINTIME 500 /* ACI time out limit */
+#define ACI_SET_MUTE 0x0d +#define ACI_SET_POWERAMP 0x0f +#define ACI_SET_TUNERMUTE 0xa3 +#define ACI_SET_TUNERMONO 0xa4 +#define ACI_SET_IDE 0xd0 +#define ACI_SET_WSS 0xd1 +#define ACI_SET_SOLOMODE 0xd2 +#define ACI_SET_PREAMP 0x03 +#define ACI_GET_PREAMP 0x21 +#define ACI_WRITE_TUNE 0xa7 +#define ACI_READ_TUNERSTEREO 0xa8 +#define ACI_READ_TUNERSTATION 0xa9 +#define ACI_READ_VERSION 0xf1 +#define ACI_READ_IDCODE 0xf2 +#define ACI_INIT 0xff +#define ACI_STATUS 0xf0 +#define ACI_S_GENERAL 0x00 +#define ACI_ERROR_OP 0xdf
+/* ACI Mixer */
+/* These are the values for the right channel GET registers.
- Add an offset of 0x01 for the left channel register.
- (left=right+0x01) */
+#define ACI_GET_MASTER 0x03 +#define ACI_GET_MIC 0x05 +#define ACI_GET_LINE 0x07 +#define ACI_GET_CD 0x09 +#define ACI_GET_SYNTH 0x0b +#define ACI_GET_PCM 0x0d +#define ACI_GET_LINE1 0x10 /* Radio on PCM20 */ +#define ACI_GET_LINE2 0x12
+#define ACI_GET_EQ1 0x22 /* from Bass ... */ +#define ACI_GET_EQ2 0x24 +#define ACI_GET_EQ3 0x26 +#define ACI_GET_EQ4 0x28 +#define ACI_GET_EQ5 0x2a +#define ACI_GET_EQ6 0x2c +#define ACI_GET_EQ7 0x2e /* ... to Treble */
+/* And these are the values for the right channel SET registers.
- For left channel access you have to add an offset of 0x08.
- MASTER is an exception, which needs an offset of 0x01 */
+#define ACI_SET_MASTER 0x00 +#define ACI_SET_MIC 0x30 +#define ACI_SET_LINE 0x31 +#define ACI_SET_CD 0x34 +#define ACI_SET_SYNTH 0x33 +#define ACI_SET_PCM 0x32 +#define ACI_SET_LINE1 0x35 /* Radio on PCM20 */ +#define ACI_SET_LINE2 0x36
+#define ACI_SET_EQ1 0x40 /* from Bass ... */ +#define ACI_SET_EQ2 0x41 +#define ACI_SET_EQ3 0x42 +#define ACI_SET_EQ4 0x43 +#define ACI_SET_EQ5 0x44 +#define ACI_SET_EQ6 0x45 +#define ACI_SET_EQ7 0x46 /* ... to Treble */
+#endif /* _ACI_H_ */ diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c index db4a4fb..932a067 100644 --- a/sound/isa/opti9xx/miro.c +++ b/sound/isa/opti9xx/miro.c @@ -40,7 +40,7 @@ #define SNDRV_LEGACY_FIND_FREE_IRQ #define SNDRV_LEGACY_FIND_FREE_DMA #include <sound/initval.h> -#include "miro.h" +#include <sound/aci.h>
MODULE_AUTHOR("Martin Langer martin-langer@gmx.de"); MODULE_LICENSE("GPL"); diff --git a/sound/isa/opti9xx/miro.h b/sound/isa/opti9xx/miro.h deleted file mode 100644 index 6e1385b..0000000 --- a/sound/isa/opti9xx/miro.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef _MIRO_H_ -#define _MIRO_H_
-#define ACI_REG_COMMAND 0 /* write register offset */ -#define ACI_REG_STATUS 1 /* read register offset */ -#define ACI_REG_BUSY 2 /* busy register offset */ -#define ACI_REG_RDS 2 /* PCM20: RDS register offset */ -#define ACI_MINTIME 500 /* ACI time out limit */
-#define ACI_SET_MUTE 0x0d -#define ACI_SET_POWERAMP 0x0f -#define ACI_SET_TUNERMUTE 0xa3 -#define ACI_SET_TUNERMONO 0xa4 -#define ACI_SET_IDE 0xd0 -#define ACI_SET_WSS 0xd1 -#define ACI_SET_SOLOMODE 0xd2 -#define ACI_SET_PREAMP 0x03 -#define ACI_GET_PREAMP 0x21 -#define ACI_WRITE_TUNE 0xa7 -#define ACI_READ_TUNERSTEREO 0xa8 -#define ACI_READ_TUNERSTATION 0xa9 -#define ACI_READ_VERSION 0xf1 -#define ACI_READ_IDCODE 0xf2 -#define ACI_INIT 0xff -#define ACI_STATUS 0xf0 -#define ACI_S_GENERAL 0x00 -#define ACI_ERROR_OP 0xdf
-/* ACI Mixer */
-/* These are the values for the right channel GET registers.
- Add an offset of 0x01 for the left channel register.
- (left=right+0x01) */
-#define ACI_GET_MASTER 0x03 -#define ACI_GET_MIC 0x05 -#define ACI_GET_LINE 0x07 -#define ACI_GET_CD 0x09 -#define ACI_GET_SYNTH 0x0b -#define ACI_GET_PCM 0x0d -#define ACI_GET_LINE1 0x10 /* Radio on PCM20 */ -#define ACI_GET_LINE2 0x12
-#define ACI_GET_EQ1 0x22 /* from Bass ... */ -#define ACI_GET_EQ2 0x24 -#define ACI_GET_EQ3 0x26 -#define ACI_GET_EQ4 0x28 -#define ACI_GET_EQ5 0x2a -#define ACI_GET_EQ6 0x2c -#define ACI_GET_EQ7 0x2e /* ... to Treble */
-/* And these are the values for the right channel SET registers.
- For left channel access you have to add an offset of 0x08.
- MASTER is an exception, which needs an offset of 0x01 */
-#define ACI_SET_MASTER 0x00 -#define ACI_SET_MIC 0x30 -#define ACI_SET_LINE 0x31 -#define ACI_SET_CD 0x34 -#define ACI_SET_SYNTH 0x33 -#define ACI_SET_PCM 0x32 -#define ACI_SET_LINE1 0x35 /* Radio on PCM20 */ -#define ACI_SET_LINE2 0x36
-#define ACI_SET_EQ1 0x40 /* from Bass ... */ -#define ACI_SET_EQ2 0x41 -#define ACI_SET_EQ3 0x42 -#define ACI_SET_EQ4 0x43 -#define ACI_SET_EQ5 0x44 -#define ACI_SET_EQ6 0x45 -#define ACI_SET_EQ7 0x46 /* ... to Treble */
-#endif /* _MIRO_H_ */
1.6.4
Internetowi nie placa! Otworz Konto Direct. Kliknij >> http://link.interia.pl/f2448