During ClockStop Mode0, peripheral interrupts are disabled.
I can see that the interrupts are disabled in rt5682_dev_system_suspend(), which is NOT a mode where the clock stop is used... I don't think this commit message is correct.
The IMPL_DEF interrupt which is used for jack detection is not disabled at all during any clock stop mode, and it shouldn't otherwise that would break the jack detection.
You are right. The commit message is wrong and not clear. The situation is that the manager driver uses the clock stop mode0 to do
system suspension.
No it does not. The clock stop is ONLY used for pm_runtime, never for system suspend. We cannot go to system suspend with the link in clock-stop mode, that will create lots of issues, that's why we perform a full pm_runtime resume in the .prepare stage.
OK, I got your point. Thanks. However, this issue reported by AMD. The AMD platform validated system level pm and runtime pm ops with the different modes.
Hi Vijendar, Do you have any comments?
The SdW device will not be re-attached when the system resume.
it will re-attach, and in addition it will lose context because the manager performs a complete reset of the bus.
So what's needed is to enable the interrupt, no matter what happened in the suspend transition.
------Please consider the environment before printing this e-mail.