From: Maciej Falkowski m.falkowski@samsung.com
Convert Samsung I2S controller to newer dt-schema format.
Signed-off-by: Maciej Falkowski m.falkowski@samsung.com Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com --- v4: - Removed description of i2s device nodes' clocks from 'clocks' property. - Added 'clock-output-names' property. - Added description of clock names. - Added '#clock-cells' property to required properties - Description of the provided clocks moved to samsung-i2s.h in separate patch
Best regards, Maciej Falkowski --- .../devicetree/bindings/sound/samsung-i2s.txt | 84 ----------- .../bindings/sound/samsung-i2s.yaml | 136 ++++++++++++++++++ 2 files changed, 136 insertions(+), 84 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/samsung-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/samsung-i2s.yaml
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt deleted file mode 100644 index a88cb00fa096..000000000000 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Samsung I2S controller - -Required SoC Specific Properties: - -- compatible : should be one of the following. - - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. - - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with - secondary fifo, s/w reset control and internal mux for root clk src. - - samsung,exynos5420-i2s: for 8/16/24bit multichannel(5.1) I2S for - playback, stereo channel capture, secondary fifo using internal - or external dma, s/w reset control, internal mux for root clk src - and 7.1 channel TDM support for playback. TDM (Time division multiplexing) - is to allow transfer of multiple channel audio data on single data line. - - samsung,exynos7-i2s: with all the available features of exynos5 i2s, - exynos7 I2S has 7.1 channel TDM support for capture, secondary fifo - with only external dma and more no.of root clk sampling frequencies. - - samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports - stereo channels. exynos7 i2s1 upgraded to 5.1 multichannel with - slightly modified bit offsets. - -- reg: physical base address of the controller and length of memory mapped - region. -- dmas: list of DMA controller phandle and DMA request line ordered pairs. -- dma-names: identifier string for each DMA request line in the dmas property. - These strings correspond 1:1 with the ordered pairs in dmas. -- clocks: Handle to iis clock and RCLK source clk. -- clock-names: - i2s0 uses some base clocks from CMU and some are from audio subsystem internal - clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and - "i2s_opclk1" as shown in the example below. - i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should - be "iis" and "i2s_opclk0". - "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root - clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2 - doesn't have any such mux. -- #clock-cells: should be 1, this property must be present if the I2S device - is a clock provider in terms of the common clock bindings, described in - ../clock/clock-bindings.txt. -- clock-output-names (deprecated): from the common clock bindings, names of - the CDCLK I2S output clocks, suggested values are "i2s_cdclk0", "i2s_cdclk1", - "i2s_cdclk3" for the I2S0, I2S1, I2S2 devices respectively. - -There are following clocks available at the I2S device nodes: - CLK_I2S_CDCLK - the CDCLK (CODECLKO) gate clock, - CLK_I2S_RCLK_PSR - the RCLK prescaler divider clock (corresponding to the - IISPSR register), - CLK_I2S_RCLK_SRC - the RCLKSRC mux clock (corresponding to RCLKSRC bit in - IISMOD register). - -Refer to the SoC datasheet for availability of the above clocks. -The CLK_I2S_RCLK_PSR and CLK_I2S_RCLK_SRC clocks are usually only available -in the IIS Multi Audio Interface. - -Note: Old DTs may not have the #clock-cells property and then not use the I2S -node as a clock supplier. - -Optional SoC Specific Properties: - -- samsung,idma-addr: Internal DMA register base address of the audio - sub system(used in secondary sound source). -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". -- #sound-dai-cells: should be 1. - - -Example: - -i2s0: i2s@3830000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - #clock-cells = <1>; - samsung,idma-addr = <0x03000000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - #sound-dai-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml new file mode 100644 index 000000000000..7d2750c26f11 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/samsung-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC I2S controller + +maintainers: + - Krzysztof Kozlowski krzk@kernel.org + - Sylwester Nawrocki s.nawrocki@samsung.com + +properties: + compatible: + description: | + samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. + + samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with + secondary fifo, s/w reset control and internal mux for root clk src. + + samsung,exynos5420-i2s: for 8/16/24bit multichannel(5.1) I2S for + playback, stereo channel capture, secondary fifo using internal + or external dma, s/w reset control, internal mux for root clk src + and 7.1 channel TDM support for playback. TDM (Time division multiplexing) + is to allow transfer of multiple channel audio data on single data line. + + samsung,exynos7-i2s: with all the available features of exynos5 i2s. + exynos7 I2S has 7.1 channel TDM support for capture, secondary fifo + with only external dma and more no.of root clk sampling frequencies. + + samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports + stereo channels. exynos7 i2s1 upgraded to 5.1 multichannel with + slightly modified bit offsets. + enum: + - samsung,s3c6410-i2s + - samsung,s5pv210-i2s + - samsung,exynos5420-i2s + - samsung,exynos7-i2s + - samsung,exynos7-i2s1 + + reg: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 3 + + dma-names: + oneOf: + - items: + - const: tx + - const: rx + - items: + - const: tx + - const: rx + - const: tx-sec + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - const: iis + - items: # for i2s0 + - const: iis + - const: i2s_opclk0 + - const: i2s_opclk1 + - items: # for i2s1 and i2s2 + - const: iis + - const: i2s_opclk0 + description: | + "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources + of the root clk. i2s0 has internal mux to select the source + of root clk and i2s1 and i2s2 doesn't have any such mux. + + "#clock-cells": + const: 1 + + clock-output-names: # deprecated + oneOf: + - items: # for i2s0 + - const: i2s_cdclk0 + - items: # for i2s1 + - const: i2s_cdclk1 + - items: # for i2s2 + - const: i2s_cdclk2 + description: Names of the CDCLK I2S output clocks. + + samsung,idma-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Internal DMA register base address of the audio + sub system(used in secondary sound source). + + pinctrl-0: + description: Should specify pin control groups used for this controller. + + pinctrl-names: + const: default + + "#sound-dai-cells": + const: 1 + +required: + - compatible + - reg + - dmas + - dma-names + - clocks + - clock-names + - "#clock-cells" + +examples: + - | + #include <dt-bindings/clock/exynos-audss-clk.h> + + i2s0: i2s@3830000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <1>; + }; +