Hi David,
Do you mean that a pin's default configuration may tell "No physical connection" by mistake?
Thanks Mengdong
-----Original Message----- From: David Henningsson [mailto:david.henningsson@canonical.com] Sent: Tuesday, June 04, 2013 4:03 PM To: alsa-devel@alsa-project.org Cc: tiwai@suse.de; Wang, Xingchao; daniel@ffwll.ch; Lin, Mengdong; Girdwood, Liam R; Li, Jocelyn; David Henningsson Subject: [RFC PATCH] ALSA: hda - Ignore default pin config on Haswell HDMI codecs
According to Daniel Vetter, these pin configs should be ignored, because the graphics driver/userspace could route audio to these pins even if they are disabled by BIOS.
Signed-off-by: David Henningsson david.henningsson@canonical.com
sound/pci/hda/patch_hdmi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
It would be good to have this acked by someone at Intel before committing.
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index e12f7a0..8c1bede 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1307,12 +1307,14 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) if (!(caps & (AC_PINCAP_HDMI | AC_PINCAP_DP))) return 0;
- config = snd_hda_codec_get_pincfg(codec, pin_nid);
- if (get_defcfg_connect(config) == AC_JACK_PORT_NONE)
return 0;- if (codec->vendor_id == 0x80862807) intel_haswell_fixup_connect_list(codec, pin_nid);
else {
/* On Haswell, default pin config should be ignored */config = snd_hda_codec_get_pincfg(codec, pin_nid);if (get_defcfg_connect(config) == AC_JACK_PORT_NONE)return 0;}
pin_idx = spec->num_pins; per_pin = snd_array_new(&spec->pins);
-- 1.7.9.5