On 12 April 2010 11:48, Daniel Mack daniel@caiaq.de wrote:
On Fri, Apr 09, 2010 at 04:11:52PM -0600, Robert Hancock wrote:
On Fri, Apr 9, 2010 at 3:23 PM, Alan Stern stern@rowland.harvard.edu wrote:
On Fri, 9 Apr 2010, Konrad Rzeszutek Wilk wrote:
On Fri, Apr 09, 2010 at 03:34:06PM -0400, Alan Stern wrote:
On Fri, 9 Apr 2010, Pedro Ribeiro wrote:
> The DMA pointers do indeed look sane. I wanted to take a deeper look at > this and set up a 64bit system today. However, I fail to see the problem > here. Pedro, how much RAM does your machine have installed?
It has 4 GB.
That means DMA mapping cannot be the cause of the problem. :-(
That isn't entirely true. The BIOS usually allocates a 256 MB ACPI/PCI hole that is under the 4GB.
So end up with 3.7 GB, then the 256MB hole, and then right above the 4GB you the the remaining memory: 4.3GB.
How can Pedro find out what physical addresses are in use on his system?
If you have 4GB of RAM then almost certainly you have memory located at addresses over 4GB. If you look at the e820 memory map printed at the start of dmesg on bootup and see entries with addresses of 100000000 or higher reported as usable, then this is the case.
Pedro, can you provide your dmesg output, please? I installed 5GB or RAM to my machine now, and even with your .config, I can't see the problem.
Daniel
There you go Daniel.
Pedro