From: Liam Girdwood liam.r.girdwood@linux.intel.com
Add HDA specific IPC mechanism for Intel DSP HW.
Signed-off-by: Keyon Jie yang.jie@linux.intel.com Signed-off-by: Liam Girdwood liam.r.girdwood@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/sof/intel/hda-ipc.c | 387 ++++++++++++++++++++++++++++++++++ 1 file changed, 387 insertions(+) create mode 100644 sound/soc/sof/intel/hda-ipc.c
diff --git a/sound/soc/sof/intel/hda-ipc.c b/sound/soc/sof/intel/hda-ipc.c new file mode 100644 index 000000000000..5673905046cf --- /dev/null +++ b/sound/soc/sof/intel/hda-ipc.c @@ -0,0 +1,387 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// +// This file is provided under a dual BSD/GPLv2 license. When using or +// redistributing this file, you may do so under either license. +// +// Copyright(c) 2018 Intel Corporation. All rights reserved. +// +// Authors: Liam Girdwood liam.r.girdwood@linux.intel.com +// Ranjani Sridharan ranjani.sridharan@linux.intel.com +// Rander Wang rander.wang@intel.com +// Keyon Jie yang.jie@linux.intel.com +// + +/* + * Hardware interface for generic Intel audio DSP HDA IP + */ + +#include "../ops.h" +#include "hda.h" + +int hda_dsp_ipc_cmd_done(struct snd_sof_dev *sdev, int dir) +{ + if (dir == SOF_IPC_HOST_REPLY) { + /* + * tell DSP cmd is done - clear busy + * interrupt and send reply msg to dsp + */ + snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCT, + HDA_DSP_REG_HIPCT_BUSY, + HDA_DSP_REG_HIPCT_BUSY); + + /* unmask BUSY interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCCTL, + HDA_DSP_REG_HIPCCTL_BUSY, + HDA_DSP_REG_HIPCCTL_BUSY); + } else { + /* + * set DONE bit - tell DSP we have received the reply msg + * from DSP, and processed it, don't send more reply to host + */ + snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCIE, + HDA_DSP_REG_HIPCIE_DONE, + HDA_DSP_REG_HIPCIE_DONE); + + /* unmask Done interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCCTL, + HDA_DSP_REG_HIPCCTL_DONE, + HDA_DSP_REG_HIPCCTL_DONE); + } + + return 0; +} + +int hda_dsp_ipc_is_ready(struct snd_sof_dev *sdev) +{ + u64 busy, done; + + /* is DSP ready for next IPC command */ + busy = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_HIPCI); + done = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_HIPCIE); + if ((busy & HDA_DSP_REG_HIPCI_BUSY) || + (done & HDA_DSP_REG_HIPCIE_DONE)) + return 0; + + return 1; +} + +int hda_dsp_ipc_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg) +{ + u32 cmd = msg->header; + + /* send IPC message to DSP */ + sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data, + msg->msg_size); + snd_sof_dsp_write(sdev, HDA_DSP_BAR, HDA_DSP_REG_HIPCI, + cmd | HDA_DSP_REG_HIPCI_BUSY); + + return 0; +} + +int hda_dsp_ipc_get_reply(struct snd_sof_dev *sdev, + struct snd_sof_ipc_msg *msg) +{ + struct sof_ipc_reply reply; + int ret = 0; + u32 size; + + /* get IPC reply from DSP in the mailbox */ + sof_mailbox_read(sdev, sdev->host_box.offset, &reply, sizeof(reply)); + if (reply.error < 0) { + size = sizeof(reply); + ret = reply.error; + } else { + /* reply correct size ? */ + if (reply.hdr.size != msg->reply_size) { + dev_err(sdev->dev, "error: reply expected 0x%zx got 0x%x bytes\n", + msg->reply_size, reply.hdr.size); + size = msg->reply_size; + ret = -EINVAL; + } else { + size = reply.hdr.size; + } + } + + /* read the message */ + if (msg->msg_data && size > 0) + sof_mailbox_read(sdev, sdev->host_box.offset, + msg->reply_data, size); + + return ret; +} + +/* IPC handler thread */ +irqreturn_t hda_dsp_ipc_irq_thread(int irq, void *context) +{ + struct snd_sof_dev *sdev = (struct snd_sof_dev *)context; + u32 hipci, hipcie, hipct, hipcte, hipcctl, msg = 0, msg_ext = 0; + irqreturn_t ret = IRQ_NONE; + int reply = -EINVAL; + + /* here we handle IPC interrupts only */ + if (!(sdev->irq_status & HDA_DSP_ADSPIS_IPC)) + return ret; + + /* read IPC status */ + hipcie = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCIE); + hipct = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_HIPCT); + hipcctl = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_HIPCCTL); + + /* is this a reply message from the DSP */ + if (hipcie & HDA_DSP_REG_HIPCIE_DONE && + hipcctl & HDA_DSP_REG_HIPCCTL_DONE) { + + hipci = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCI); + msg = hipci & HDA_DSP_REG_HIPCI_MSG_MASK; + msg_ext = hipcie & HDA_DSP_REG_HIPCIE_MSG_MASK; + + dev_vdbg(sdev->dev, + "ipc: firmware response, msg:0x%x, msg_ext:0x%x\n", + msg, msg_ext); + + /* mask Done interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCCTL, + HDA_DSP_REG_HIPCCTL_DONE, 0); + + /* handle immediate reply from DSP core - ignore ROM messages */ + if (msg != 0x1004000) + reply = snd_sof_ipc_reply(sdev, msg); + + /* + * handle immediate reply from DSP core. If the msg is + * found, set done bit in cmd_done which is called at the + * end of message processing function, else set it here + * because the done bit can't be set in cmd_done function + * which is triggered by msg + */ + if (reply) + hda_dsp_ipc_cmd_done(sdev, SOF_IPC_DSP_REPLY); + + ret = IRQ_HANDLED; + } + + /* is this a new message from DSP */ + if (hipct & HDA_DSP_REG_HIPCT_BUSY && + hipcctl & HDA_DSP_REG_HIPCCTL_BUSY) { + + hipcte = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCTE); + msg = hipct & HDA_DSP_REG_HIPCT_MSG_MASK; + msg_ext = hipcte & HDA_DSP_REG_HIPCTE_MSG_MASK; + + dev_vdbg(sdev->dev, + "ipc: firmware initiated, msg:0x%x, msg_ext:0x%x\n", + msg, msg_ext); + + /* mask BUSY interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, + HDA_DSP_REG_HIPCCTL, + HDA_DSP_REG_HIPCCTL_BUSY, 0); + + /* handle messages from DSP */ + if ((hipct & SOF_IPC_PANIC_MAGIC_MASK) == SOF_IPC_PANIC_MAGIC) { + /* this is a PANIC message !! */ + snd_sof_dsp_panic(sdev, HDA_DSP_PANIC_OFFSET(msg_ext)); + } else { + /* normal message - process normally*/ + snd_sof_ipc_msgs_rx(sdev); + } + + ret = IRQ_HANDLED; + } + + if (ret == IRQ_HANDLED) { + /* reenable IPC interrupt */ + snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC, + HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC); + } + + /* wake up sleeper if we are loading code */ + if (sdev->code_loading) { + sdev->code_loading = 0; + wake_up(&sdev->waitq); + } + + return ret; +} + +/* is this IRQ for ADSP ? - we only care about IPC here */ +irqreturn_t hda_dsp_ipc_irq_handler(int irq, void *context) +{ + struct snd_sof_dev *sdev = (struct snd_sof_dev *)context; + int ret = IRQ_NONE; + + spin_lock(&sdev->hw_lock); + + /* store status */ + sdev->irq_status = snd_sof_dsp_read(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPIS); + + /* invalid message ? */ + if (sdev->irq_status == 0xffffffff) + goto out; + + /* IPC message ? */ + if (sdev->irq_status & HDA_DSP_ADSPIS_IPC) { + /* disable IPC interrupt */ + snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, + HDA_DSP_REG_ADSPIC, + HDA_DSP_ADSPIC_IPC, 0); + ret = IRQ_WAKE_THREAD; + } + +out: + spin_unlock(&sdev->hw_lock); + return ret; +} + +/* + * IPC Firmware ready. + */ + +static void ipc_get_windows(struct snd_sof_dev *sdev) +{ + struct sof_ipc_window_elem *elem; + u32 outbox_offset = 0; + u32 stream_offset = 0; + u32 inbox_offset = 0; + u32 outbox_size = 0; + u32 stream_size = 0; + u32 inbox_size = 0; + int i; + + if (!sdev->info_window) { + dev_err(sdev->dev, "error: have no window info\n"); + return; + } + + for (i = 0; i < sdev->info_window->num_windows; i++) { + elem = &sdev->info_window->window[i]; + + switch (elem->type) { + case SOF_IPC_REGION_UPBOX: + inbox_offset = + elem->offset + SRAM_WINDOW_OFFSET(elem->id); + inbox_size = elem->size; + snd_sof_debugfs_io_create_item(sdev, + sdev->bar[HDA_DSP_BAR] + + inbox_offset, + elem->size, "inbox"); + break; + case SOF_IPC_REGION_DOWNBOX: + outbox_offset = + elem->offset + SRAM_WINDOW_OFFSET(elem->id); + outbox_size = elem->size; + snd_sof_debugfs_io_create_item(sdev, + sdev->bar[HDA_DSP_BAR] + + outbox_offset, + elem->size, "outbox"); + break; + case SOF_IPC_REGION_TRACE: + snd_sof_debugfs_io_create_item(sdev, + sdev->bar[HDA_DSP_BAR] + + elem->offset + + SRAM_WINDOW_OFFSET + (elem->id), + elem->size, "etrace"); + break; + case SOF_IPC_REGION_DEBUG: + snd_sof_debugfs_io_create_item(sdev, + sdev->bar[HDA_DSP_BAR] + + elem->offset + + SRAM_WINDOW_OFFSET + (elem->id), + elem->size, "debug"); + break; + case SOF_IPC_REGION_STREAM: + stream_offset = + elem->offset + SRAM_WINDOW_OFFSET(elem->id); + stream_size = elem->size; + snd_sof_debugfs_io_create_item(sdev, + sdev->bar[HDA_DSP_BAR] + + elem->offset + + SRAM_WINDOW_OFFSET + (elem->id), + elem->size, "stream"); + break; + case SOF_IPC_REGION_REGS: + snd_sof_debugfs_io_create_item(sdev, + sdev->bar[HDA_DSP_BAR] + + elem->offset + + SRAM_WINDOW_OFFSET + (elem->id), + elem->size, "regs"); + break; + case SOF_IPC_REGION_EXCEPTION: + sdev->dsp_oops_offset = elem->offset + + SRAM_WINDOW_OFFSET(elem->id); + snd_sof_debugfs_io_create_item(sdev, + sdev->bar[HDA_DSP_BAR] + + elem->offset + + SRAM_WINDOW_OFFSET + (elem->id), + elem->size, "exception"); + break; + default: + dev_err(sdev->dev, "error: get illegal window info\n"); + return; + } + } + + if (outbox_size == 0 || inbox_size == 0) { + dev_err(sdev->dev, "error: get illegal mailbox window\n"); + return; + } + + snd_sof_dsp_mailbox_init(sdev, inbox_offset, inbox_size, + outbox_offset, outbox_size); + sdev->stream_box.offset = stream_offset; + sdev->stream_box.size = stream_size; + + dev_dbg(sdev->dev, " mailbox upstream 0x%x - size 0x%x\n", + inbox_offset, inbox_size); + dev_dbg(sdev->dev, " mailbox downstream 0x%x - size 0x%x\n", + outbox_offset, outbox_size); + dev_dbg(sdev->dev, " stream region 0x%x - size 0x%x\n", + stream_offset, stream_size); +} + +int hda_dsp_ipc_fw_ready(struct snd_sof_dev *sdev, u32 msg_id) +{ + struct sof_ipc_fw_ready *fw_ready = &sdev->fw_ready; + u32 offset; + int ret; + + /* mailbox must be on 4k boundary */ + offset = HDA_DSP_MBOX_UPLINK_OFFSET; + + dev_dbg(sdev->dev, "ipc: DSP is ready 0x%8.8x offset 0x%x\n", + msg_id, offset); + + /* no need to re-check version/ABI for subsequent boots */ + if (!sdev->first_boot) + return 0; + + /* copy data from the DSP FW ready offset */ + sof_block_read(sdev, offset, fw_ready, sizeof(*fw_ready)); + + /* make sure ABI version is compatible */ + ret = snd_sof_ipc_valid(sdev); + if (ret < 0) + return ret; + + /* now check for extended data */ + snd_sof_fw_parse_ext_data(sdev, HDA_DSP_MBOX_UPLINK_OFFSET + + sizeof(struct sof_ipc_fw_ready)); + + ipc_get_windows(sdev); + + return 0; +}