Hi all!
Here is a second revision of the ATI/AMD multichannel patch, now a patchset.
Since the last revision from a bit over the week ago, AMD has released more documentation ( http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf ), so the patchset contains new additions:
- HBR bitstreaming support (HD passthrough, for DTS-HD and Dolby TrueHD) o This completes the set, now we have HBR on NVIDIA, Intel and AMD :)
- More complete ELD emulation on revision 3+ (0x100300) codecs o Untested, though from what I can see the newly added fields may not be filled in yet by the radeon driver.
- Ramp up/down configuration according to non-pcm bit on rev3+ o I guess this means gradual fade-in/out? Untested.
Other changes since the previous post: - ELD emulation moved to hda_eld.c and cleaned up a bit - Some fixes to hdmi_chmap_ctl_tlv() changes (and maybe something else I forgot - if so, sorry)
Also, the pairwise channel mapping code has been tested to work with custom channel maps. The TLV contents are shown as follows by amixer: | chmap-paired=FL,FR | chmap-paired=FL,FR,NA,LFE | chmap-paired=FL,FR,FC,NA | chmap-paired=FL,FR,RL,RR | chmap-paired=FL,FR,FC,LFE | chmap-paired=FL,FR,NA,LFE,RL,RR | chmap-paired=FL,FR,FC,NA,RL,RR [etc]
Rafał, do you know about the missing (AFAICS) support for lipsync (F7B) and sink information (F81) in radeon driver?
This patchset requires at least more testing before it should be applied.
A few other somewhat open things: - I named everything ati/ATI except for is_amdhdmi_rev3() and has_amd_full_remap_support() that are AMD-only, though AMD-only verbs I still named ATI to have similar names to other verbs. Does that seem sensible or how should this be done? - Currently setup_audio_infoframe() writes the channel mapping every time for ATI/AMD, should we try to avoid that? If so, any suggestions? (argh, just noticed this is broken for manual channel maps on non-ATI; if just the chmap is changed, channel mapping is not updated; so this requires fixes in the generic side as well)
I'm especially interested in testers with:
- Older codecs other than 0x1002aa01. My best guess still is that the new code works on them as well. o On these I'd like to know if multichannel and the new formats work, i.e. e.g. speaker-test -D hdmi:CARD=Generic,DEV=0 -c8 -r192000 -F S32_LE
- Codec 0x1002aa01 revisions 0x100300 (Rev ID 3) or later (see /proc/asound/cardX/codec#Y). These are HD7750+ I think. Stuff to be tested on these: o The ramp up/down stuff, i.e. patch 4. Is there any difference seen with these, in the beginning/end (i.e. fade-out/in): speaker-test -D hdmi:CARD=Generic,DEV=0,AES0=0x04 -c2 -r48000 speaker-test -D hdmi:CARD=Generic,DEV=0,AES0=0x06 -c2 -r48000 Also, is there a difference in the beginning of these (maybe garbage sound and/or slightly slower startup?): aplay -Dhdmi:CARD=Generic,DEV=0,AES0=4 -r44100 -f s16_le -c2 testi.dts.cut.spdif aplay -Dhdmi:CARD=Generic,DEV=0,AES0=6 -r44100 -f s16_le -c2 testi.dts.cut.spdif
o Contents of /proc/asound/cardX/eld#0. I'd like to see the contents both with radeon and with the proprietary fglrx driver in use
Olivier, can you test again on your rev3 hw? :)
The patchset can be found in combined form (for e.g. testing purposes) at: http://onse.fi/files/atihdmi5.patch
The test file referenced above can be found at: http://onse.fi/files/testi.dts.cut.spdif.gz (just regular DTS)
Anssi Hannula (4): ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support ALSA: hda - hdmi: Add ELD emulation for ATI/AMD codecs ALSA: hda - hdmi: Add HBR bitstreaming support for ATI/AMD HDMI codecs ALSA: hda - hdmi: Disable ramp-up/down for non-PCM on AMD codecs
sound/pci/hda/hda_eld.c | 157 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/hda_local.h | 5 +++ sound/pci/hda/patch_hdmi.c | 424 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------ 3 files changed, 547 insertions(+), 39 deletions(-)