When we fail to boot the firmware, we encounter a kernel oops in hda_dsp_get_registers(), which is called conditionally in hda_dsp_dump() when the sdev_>boot_complete flag is set.
Setting this flag _after_ dumping the data fixes the issue and does not change the programming flow.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/sof/loader.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c index d7f32745fefe..9a9a381a908d 100644 --- a/sound/soc/sof/loader.c +++ b/sound/soc/sof/loader.c @@ -546,10 +546,10 @@ int snd_sof_run_firmware(struct snd_sof_dev *sdev) msecs_to_jiffies(sdev->boot_timeout)); if (ret == 0) { dev_err(sdev->dev, "error: firmware boot failure\n"); - /* after this point FW_READY msg should be ignored */ - sdev->boot_complete = true; snd_sof_dsp_dbg_dump(sdev, SOF_DBG_REGS | SOF_DBG_MBOX | SOF_DBG_TEXT | SOF_DBG_PCI); + /* after this point FW_READY msg should be ignored */ + sdev->boot_complete = true; return -EIO; }