23 Jan
2013
23 Jan
'13
4:48 p.m.
On Wed, Jan 23, 2013 at 12:39:35PM +0000, Hebbar, Gururaja wrote:
On Fri, Jan 04, 2013 at 17:56:12, Mark Brown wrote:
The CODEC driver biases should be changed over to be supplies, this makes the above much more natural - the routing there is a hack for older versions of ASoc. Otherwise this looks fine.
ON TLV320AIC3x Codec, MIC Bias power on/off share the same register bits with Bias voltage output.
So you need to use an event to write the actual enable bit.
SGTL5000 --> Single register for MIC BIAS enable & output impedance of MIC Bias. The driver uses SND_SOC_DAPM_POST_PMU & SND_SOC_DAPM_PRE_PMD macro to handle the MIC Bias enable & disable event.
This is the way these things should be handled.