Hi Shengjiu,
On Fri, Mar 01, 2019 at 02:32:38AM +0000, S.j. Wang wrote:
There is a constraint for the channel number setting on the asrc of older version (e.g. imx35), the channel number should be even, odd number isn't valid.
So add protection when the asrc of older version is used.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
sound/soc/fsl/fsl_asrc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 528e8b108422..b3b3c5e15ef1 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -109,7 +109,8 @@ static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair) if (index == ASRC_INVALID_PAIR) { dev_err(dev, "all pairs are busy now\n"); ret = -EBUSY;
- } else if (asrc_priv->channel_avail < channels) {
- } else if (asrc_priv->channel_avail < channels ||
(asrc_priv->channel_bits < 4 && channels % 2 != 0)) {
I feel it'd be better to have another else-if, since the existing error message is against something else.
+ } else if (asrc_priv->channel_bits < 4 && channels & 1) { + /* old version of ASRC has channel_bits = 3 */ + dev_err(dev, "does not support odd channel number\n"); + ret = -EINVAL;
Alternatively, I feel instead of error-out at here, should we add a HW constraint or at least fence it off at the beginning of the hw_params()? This is actually nothing specific to the pair-request function but a hardware constraint.