From: Ian Minett ian_minett@creativelabs.com
Signed-off-by: Ian Minett ian_minett@creativelabs.com
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index da65535..846826d 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -27,6 +27,7 @@ #include <linux/pci.h> #include <linux/mutex.h> #include <linux/module.h> +#include <linux/firmware.h> #include <sound/core.h> #include "hda_codec.h" #include "hda_local.h" @@ -34,12 +35,33 @@
#include "ca0132_regs.h"
+#define DSP_DMA_WRITE_BUFLEN_INIT (1UL<<18) +#define DSP_DMA_WRITE_BUFLEN_OVLY (1UL<<15) + +#define DMA_TRANSFER_FRAME_SIZE_NWORDS 8 +#define DMA_TRANSFER_MAX_FRAME_SIZE_NWORDS 32 +#define DMA_OVERLAY_FRAME_SIZE_NWORDS 2 + +#define MASTERCONTROL 0x80 +#define MASTERCONTROL_ALLOC_DMA_CHAN 9 + #define WIDGET_CHIP_CTRL 0x15 #define WIDGET_DSP_CTRL 0x16
#define WUH_MEM_CONNID 10 #define DSP_MEM_CONNID 16
+#define MEM_CONNID_MICIN1 3 +#define MEM_CONNID_MICIN2 5 +#define MEM_CONNID_MICOUT1 12 +#define MEM_CONNID_MICOUT2 14 +#define MEM_CONNID_WUH 10 +#define MEM_CONNID_DSP 16 +#define MEM_CONNID_DMIC 100 + +#define SCP_SET 0 +#define SCP_GET 1 + enum hda_cmd_vendor_io { /* for DspIO node */ VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000, @@ -64,7 +86,11 @@ enum hda_cmd_vendor_io { VENDOR_CHIPIO_HIC_POST_READ = 0x702, VENDOR_CHIPIO_HIC_READ_DATA = 0xF03,
+ VENDOR_CHIPIO_8051_DATA_WRITE = 0x707, + VENDOR_CHIPIO_8051_DATA_READ = 0xF07, + VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE = 0x70A, + VENDOR_CHIPIO_CT_EXTENSIONS_GET = 0xF0A,
VENDOR_CHIPIO_PLL_PMU_WRITE = 0x70C, VENDOR_CHIPIO_PLL_PMU_READ = 0xF0C, @@ -72,18 +98,27 @@ enum hda_cmd_vendor_io { VENDOR_CHIPIO_8051_ADDRESS_HIGH = 0x70E, VENDOR_CHIPIO_FLAG_SET = 0x70F, VENDOR_CHIPIO_FLAGS_GET = 0xF0F, - VENDOR_CHIPIO_PARAMETER_SET = 0x710, - VENDOR_CHIPIO_PARAMETER_GET = 0xF10, + VENDOR_CHIPIO_PARAM_SET = 0x710, + VENDOR_CHIPIO_PARAM_GET = 0xF10,
VENDOR_CHIPIO_PORT_ALLOC_CONFIG_SET = 0x711, VENDOR_CHIPIO_PORT_ALLOC_SET = 0x712, VENDOR_CHIPIO_PORT_ALLOC_GET = 0xF12, VENDOR_CHIPIO_PORT_FREE_SET = 0x713,
- VENDOR_CHIPIO_PARAMETER_EX_ID_GET = 0xF17, - VENDOR_CHIPIO_PARAMETER_EX_ID_SET = 0x717, - VENDOR_CHIPIO_PARAMETER_EX_VALUE_GET = 0xF18, - VENDOR_CHIPIO_PARAMETER_EX_VALUE_SET = 0x718 + VENDOR_CHIPIO_PARAM_EX_ID_GET = 0xF17, + VENDOR_CHIPIO_PARAM_EX_ID_SET = 0x717, + VENDOR_CHIPIO_PARAM_EX_VALUE_GET = 0xF18, + VENDOR_CHIPIO_PARAM_EX_VALUE_SET = 0x718, + + VENDOR_CHIPIO_DMIC_CTL_SET = 0x788, + VENDOR_CHIPIO_DMIC_CTL_GET = 0xF88, + VENDOR_CHIPIO_DMIC_PIN_SET = 0x789, + VENDOR_CHIPIO_DMIC_PIN_GET = 0xF89, + VENDOR_CHIPIO_DMIC_MCLK_SET = 0x78A, + VENDOR_CHIPIO_DMIC_MCLK_GET = 0xF8A, + + VENDOR_CHIPIO_EAPD_SEL_SET = 0x78D };
/* @@ -133,7 +168,7 @@ enum control_flag_id { /* Impedance for ramp generator on Port_A 16 Ohm/10K Ohm */ CONTROL_FLAG_PORT_A_10KOHM_LOAD = 20, /* Impedance for ramp generator on Port_D, 16 Ohm/10K Ohm */ - CONTROL_FLAG_PORT_D_10K0HM_LOAD = 21, + CONTROL_FLAG_PORT_D_10KOHM_LOAD = 21, /* ASI rate is 48kHz/96kHz */ CONTROL_FLAG_ASI_96KHZ = 22, /* DAC power settings able to control attached ports no/yes */ @@ -147,7 +182,7 @@ enum control_flag_id { /* * Control parameter IDs */ -enum control_parameter_id { +enum control_param_id { /* 0: force HDA, 1: allow DSP if HDA Spdif1Out stream is idle */ CONTROL_PARAM_SPDIF1_SOURCE = 2,