This driver was ported from an old version in linux 2.6.27 and adjusted for the new ASoC framework and DMA API.
Signed-off-by: Piotr Wojtaszczyk piotr.wojtaszczyk@timesys.com --- Changes for v5: - Removed "N:" from the MAINTAINERS entry - Removed unused filter_data and flags variables
Changes for v4: - Add to MAINTAINERS - Use guard(mutex)(&i2s_info_p->lock) when possible - Request dma chennels using DT entries in devm_snd_dmaengine_pcm_register
Changes for v3: - Split previous commit for separate subsystems - Add support and jonathan.downing@nautel.com as a maintainer for the driver - Replaced `SND_SOC` config dependency with COMPILE_TEST - Moved `snd-soc-fsl-lpc3xxx-y` in Makefile up in the list to maintain alfabedical order - Changed comment to c++ format - replaced custom absd32() with standard abs() function - Added clock provider check in lpc3xxx_i2s_set_dai_fmt() - Removed empty lpc32xx_i2s_remove() function - Reworked i2s regs definitions to include LPC3XXX prefix - Replaced custom _BIT, _SBD with standard BIT and FIELD_PREP macros
Changes for v2: - Coding Style cleanup - Use dev_err_probe() for error handling in probe function - Removed unneded err_clk_disable label - Removed empty function - Droped of_match_ptr in lpc32xx_i2s_match DT match table - ASoC struct adjustmes for the latest 6.10-rc3 kernel
MAINTAINERS | 1 + sound/soc/fsl/Kconfig | 7 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/lpc3xxx-i2s.c | 375 ++++++++++++++++++++++++++++++++++++ sound/soc/fsl/lpc3xxx-i2s.h | 79 ++++++++ sound/soc/fsl/lpc3xxx-pcm.c | 72 +++++++ 6 files changed, 536 insertions(+) create mode 100644 sound/soc/fsl/lpc3xxx-i2s.c create mode 100644 sound/soc/fsl/lpc3xxx-i2s.h create mode 100644 sound/soc/fsl/lpc3xxx-pcm.c
diff --git a/MAINTAINERS b/MAINTAINERS index 118d48747641..adfe07a99c1a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8927,6 +8927,7 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers) L: linuxppc-dev@lists.ozlabs.org S: Maintained F: Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml +F: sound/soc/fsl/lpc3xxx-*
FREESCALE SOC SOUND QMC DRIVER M: Herve Codina herve.codina@bootlin.com diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 270726c134b3..72f2d4d15696 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -130,6 +130,13 @@ config SND_SOC_FSL_RPMSG This option is only useful for out-of-tree drivers since in-tree drivers select it automatically.
+config SND_SOC_FSL_LPC3XXX + tristate "SoC Audio for NXP LPC32XX CPUs" + depends on ARCH_LPC32XX || COMPILE_TEST + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y or M if you want to add support for the LPC3XXX I2S interface. + config SND_SOC_IMX_PCM_DMA tristate select SND_SOC_GENERIC_DMAENGINE_PCM diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index 2fe78eed3a48..2a61e2f96438 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o snd-soc-fsl-audmix-y := fsl_audmix.o snd-soc-fsl-asoc-card-y := fsl-asoc-card.o snd-soc-fsl-asrc-y := fsl_asrc.o fsl_asrc_dma.o +snd-soc-fsl-lpc3xxx-y := lpc3xxx-pcm.o lpc3xxx-i2s.o snd-soc-fsl-sai-y := fsl_sai.o snd-soc-fsl-ssi-y := fsl_ssi.o snd-soc-fsl-ssi-$(CONFIG_DEBUG_FS) += fsl_ssi_dbg.o @@ -29,6 +30,7 @@ snd-soc-fsl-qmc-audio-y := fsl_qmc_audio.o obj-$(CONFIG_SND_SOC_FSL_AUDMIX) += snd-soc-fsl-audmix.o obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o obj-$(CONFIG_SND_SOC_FSL_ASRC) += snd-soc-fsl-asrc.o +obj-$(CONFIG_SND_SOC_FSL_LPC3XXX) += snd-soc-fsl-lpc3xxx.o obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o diff --git a/sound/soc/fsl/lpc3xxx-i2s.c b/sound/soc/fsl/lpc3xxx-i2s.c new file mode 100644 index 000000000000..0e5b4d5202ff --- /dev/null +++ b/sound/soc/fsl/lpc3xxx-i2s.c @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// Author: Kevin Wells kevin.wells@nxp.com +// +// Copyright (C) 2008 NXP Semiconductors +// Copyright 2023 Timesys Corporation piotr.wojtaszczyk@timesys.com + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/dmaengine_pcm.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include "lpc3xxx-i2s.h" + +#define I2S_PLAYBACK_FLAG 0x1 +#define I2S_CAPTURE_FLAG 0x2 + +#define LPC3XXX_I2S_RATES ( \ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000) + +#define LPC3XXX_I2S_FORMATS ( \ + SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static void __lpc3xxx_find_clkdiv(u32 *clkx, u32 *clky, int freq, int xbytes, u32 clkrate) +{ + u32 i2srate; + u32 idxx, idyy; + u32 savedbitclkrate, diff, trate, baseclk; + + /* Adjust rate for sample size (bits) and 2 channels and offset for + * divider in clock output + */ + i2srate = (freq / 100) * 2 * (8 * xbytes); + i2srate = i2srate << 1; + clkrate = clkrate / 100; + baseclk = clkrate; + *clkx = 1; + *clky = 1; + + /* Find the best divider */ + *clkx = *clky = 0; + savedbitclkrate = 0; + diff = ~0; + for (idxx = 1; idxx < 0xFF; idxx++) { + for (idyy = 1; idyy < 0xFF; idyy++) { + trate = (baseclk * idxx) / idyy; + if (abs(trate - i2srate) < diff) { + diff = abs(trate - i2srate); + savedbitclkrate = trate; + *clkx = idxx; + *clky = idyy; + } + } + } +} + +static int lpc3xxx_i2s_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai) +{ + struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai); + struct device *dev = i2s_info_p->dev; + u32 flag; + int ret = 0; + + guard(mutex)(&i2s_info_p->lock); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + flag = I2S_PLAYBACK_FLAG; + else + flag = I2S_CAPTURE_FLAG; + + if (flag & i2s_info_p->streams_in_use) { + dev_warn(dev, "I2S channel is busy\n"); + ret = -EBUSY; + return ret; + } + + if (i2s_info_p->streams_in_use == 0) { + ret = clk_prepare_enable(i2s_info_p->clk); + if (ret) { + dev_err(dev, "Can't enable clock, err=%d\n", ret); + return ret; + } + } + + i2s_info_p->streams_in_use |= flag; + return 0; +} + +static void lpc3xxx_i2s_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai) +{ + struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai); + struct regmap *regs = i2s_info_p->regs; + const u32 stop_bits = (LPC3XXX_I2S_RESET | LPC3XXX_I2S_STOP); + u32 flag; + + guard(mutex)(&i2s_info_p->lock); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + flag = I2S_PLAYBACK_FLAG; + regmap_write(regs, LPC3XXX_REG_I2S_TX_RATE, 0); + regmap_update_bits(regs, LPC3XXX_REG_I2S_DAO, stop_bits, stop_bits); + } else { + flag = I2S_CAPTURE_FLAG; + regmap_write(regs, LPC3XXX_REG_I2S_RX_RATE, 0); + regmap_update_bits(regs, LPC3XXX_REG_I2S_DAI, stop_bits, stop_bits); + } + i2s_info_p->streams_in_use &= ~flag; + + if (i2s_info_p->streams_in_use == 0) + clk_disable_unprepare(i2s_info_p->clk); +} + +static int lpc3xxx_i2s_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai); + + /* Will use in HW params later */ + i2s_info_p->freq = freq; + + return 0; +} + +static int lpc3xxx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) +{ + struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai); + struct device *dev = i2s_info_p->dev; + + if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_I2S) { + dev_warn(dev, "unsupported bus format %d\n", fmt); + return -EINVAL; + } + + if ((fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) != SND_SOC_DAIFMT_BP_FP) { + dev_warn(dev, "unsupported clock provider %d\n", fmt); + return -EINVAL; + } + + return 0; +} + +static int lpc3xxx_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai); + struct device *dev = i2s_info_p->dev; + struct regmap *regs = i2s_info_p->regs; + int xfersize; + u32 tmp, clkx, clky; + + tmp = LPC3XXX_I2S_RESET | LPC3XXX_I2S_STOP; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + tmp |= LPC3XXX_I2S_WW8 | LPC3XXX_I2S_WS_HP(LPC3XXX_I2S_WW8_HP); + xfersize = 1; + break; + + case SNDRV_PCM_FORMAT_S16_LE: + tmp |= LPC3XXX_I2S_WW16 | LPC3XXX_I2S_WS_HP(LPC3XXX_I2S_WW16_HP); + xfersize = 2; + break; + + case SNDRV_PCM_FORMAT_S32_LE: + tmp |= LPC3XXX_I2S_WW32 | LPC3XXX_I2S_WS_HP(LPC3XXX_I2S_WW32_HP); + xfersize = 4; + break; + + default: + dev_warn(dev, "Unsupported audio data format %d\n", params_format(params)); + return -EINVAL; + } + + if (params_channels(params) == 1) + tmp |= LPC3XXX_I2S_MONO; + + __lpc3xxx_find_clkdiv(&clkx, &clky, i2s_info_p->freq, xfersize, i2s_info_p->clkrate); + + dev_dbg(dev, "Stream : %s\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? "playback" : "capture"); + dev_dbg(dev, "Desired clock rate : %d\n", i2s_info_p->freq); + dev_dbg(dev, "Base clock rate : %d\n", i2s_info_p->clkrate); + dev_dbg(dev, "Transfer size (bytes) : %d\n", xfersize); + dev_dbg(dev, "Clock divider (x) : %d\n", clkx); + dev_dbg(dev, "Clock divider (y) : %d\n", clky); + dev_dbg(dev, "Channels : %d\n", params_channels(params)); + dev_dbg(dev, "Data format : %s\n", "I2S"); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + regmap_write(regs, LPC3XXX_REG_I2S_DMA1, + LPC3XXX_I2S_DMA1_TX_EN | LPC3XXX_I2S_DMA0_TX_DEPTH(4)); + regmap_write(regs, LPC3XXX_REG_I2S_TX_RATE, (clkx << 8) | clky); + regmap_write(regs, LPC3XXX_REG_I2S_DAO, tmp); + } else { + regmap_write(regs, LPC3XXX_REG_I2S_DMA0, + LPC3XXX_I2S_DMA0_RX_EN | LPC3XXX_I2S_DMA1_RX_DEPTH(4)); + regmap_write(regs, LPC3XXX_REG_I2S_RX_RATE, (clkx << 8) | clky); + regmap_write(regs, LPC3XXX_REG_I2S_DAI, tmp); + } + + return 0; +} + +static int lpc3xxx_i2s_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *cpu_dai) +{ + struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai); + struct regmap *regs = i2s_info_p->regs; + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + regmap_update_bits(regs, LPC3XXX_REG_I2S_DAO, + LPC3XXX_I2S_STOP, LPC3XXX_I2S_STOP); + else + regmap_update_bits(regs, LPC3XXX_REG_I2S_DAI, + LPC3XXX_I2S_STOP, LPC3XXX_I2S_STOP); + break; + + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + regmap_update_bits(regs, LPC3XXX_REG_I2S_DAO, + (LPC3XXX_I2S_RESET | LPC3XXX_I2S_STOP), 0); + else + regmap_update_bits(regs, LPC3XXX_REG_I2S_DAI, + (LPC3XXX_I2S_RESET | LPC3XXX_I2S_STOP), 0); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int lpc3xxx_i2s_dai_probe(struct snd_soc_dai *dai) +{ + struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_init_dma_data(dai, &i2s_info_p->playback_dma_config, + &i2s_info_p->capture_dma_config); + return 0; +} + +const struct snd_soc_dai_ops lpc3xxx_i2s_dai_ops = { + .probe = lpc3xxx_i2s_dai_probe, + .startup = lpc3xxx_i2s_startup, + .shutdown = lpc3xxx_i2s_shutdown, + .trigger = lpc3xxx_i2s_trigger, + .hw_params = lpc3xxx_i2s_hw_params, + .set_sysclk = lpc3xxx_i2s_set_dai_sysclk, + .set_fmt = lpc3xxx_i2s_set_dai_fmt, +}; + +struct snd_soc_dai_driver lpc3xxx_i2s_dai_driver = { + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = LPC3XXX_I2S_RATES, + .formats = LPC3XXX_I2S_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = LPC3XXX_I2S_RATES, + .formats = LPC3XXX_I2S_FORMATS, + }, + .ops = &lpc3xxx_i2s_dai_ops, + .symmetric_rate = 1, + .symmetric_channels = 1, + .symmetric_sample_bits = 1, +}; + +static const struct snd_soc_component_driver lpc32xx_i2s_component = { + .name = "lpc32xx-i2s", + .legacy_dai_naming = 1, +}; + +static const struct regmap_config lpc32xx_i2s_regconfig = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = LPC3XXX_REG_I2S_RX_RATE, +}; + +static int lpc32xx_i2s_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct lpc3xxx_i2s_info *i2s_info_p; + struct resource *res; + void __iomem *iomem; + int ret; + + i2s_info_p = devm_kzalloc(dev, sizeof(*i2s_info_p), GFP_KERNEL); + if (!i2s_info_p) + return -ENOMEM; + + platform_set_drvdata(pdev, i2s_info_p); + i2s_info_p->dev = dev; + + iomem = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(iomem)) + return dev_err_probe(dev, PTR_ERR(iomem), "Can't map registers\n"); + + i2s_info_p->regs = devm_regmap_init_mmio(dev, iomem, &lpc32xx_i2s_regconfig); + if (IS_ERR(i2s_info_p->regs)) + return dev_err_probe(dev, PTR_ERR(i2s_info_p->regs), + "failed to init register map: %d\n", ret); + + i2s_info_p->clk = devm_clk_get(dev, NULL); + if (IS_ERR(i2s_info_p->clk)) + return dev_err_probe(dev, PTR_ERR(i2s_info_p->clk), "Can't get clock\n"); + + i2s_info_p->clkrate = clk_get_rate(i2s_info_p->clk); + if (i2s_info_p->clkrate == 0) + return dev_err_probe(dev, -EINVAL, "Invalid returned clock rate\n"); + + mutex_init(&i2s_info_p->lock); + + ret = devm_snd_soc_register_component(dev, &lpc32xx_i2s_component, + &lpc3xxx_i2s_dai_driver, 1); + if (ret) + return dev_err_probe(dev, ret, "Can't register cpu_dai component\n"); + + i2s_info_p->playback_dma_config.addr = (dma_addr_t)(res->start + LPC3XXX_REG_I2S_TX_FIFO); + i2s_info_p->playback_dma_config.maxburst = 4; + + i2s_info_p->capture_dma_config.addr = (dma_addr_t)(res->start + LPC3XXX_REG_I2S_RX_FIFO); + i2s_info_p->capture_dma_config.maxburst = 4; + + ret = lpc3xxx_pcm_register(pdev); + if (ret) + return dev_err_probe(dev, ret, "Can't register pcm component\n"); + + return 0; +} + +static const struct of_device_id lpc32xx_i2s_match[] = { + { .compatible = "nxp,lpc3220-i2s" }, + {}, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_i2s_match); + +static struct platform_driver lpc32xx_i2s_driver = { + .probe = lpc32xx_i2s_probe, + .driver = { + .name = "lpc3xxx-i2s", + .of_match_table = lpc32xx_i2s_match, + }, +}; + +module_platform_driver(lpc32xx_i2s_driver); + +MODULE_AUTHOR("Kevin Wells kevin.wells@nxp.com"); +MODULE_AUTHOR("Piotr Wojtaszczyk piotr.wojtaszczyk@timesys.com"); +MODULE_DESCRIPTION("ASoC LPC3XXX I2S interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/fsl/lpc3xxx-i2s.h b/sound/soc/fsl/lpc3xxx-i2s.h new file mode 100644 index 000000000000..eec755448478 --- /dev/null +++ b/sound/soc/fsl/lpc3xxx-i2s.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Author: Kevin Wells kevin.wells@nxp.com + * + * Copyright (C) 2008 NXP Semiconductors + * Copyright 2023 Timesys Corporation piotr.wojtaszczyk@timesys.com + */ + +#ifndef __SOUND_SOC_LPC3XXX_I2S_H +#define __SOUND_SOC_LPC3XXX_I2S_H + +#include <linux/types.h> +#include <linux/regmap.h> + +struct lpc3xxx_i2s_info { + struct device *dev; + struct clk *clk; + struct mutex lock; /* To serialize user-space access */ + struct regmap *regs; + u32 streams_in_use; + u32 clkrate; + int freq; + struct snd_dmaengine_dai_dma_data playback_dma_config; + struct snd_dmaengine_dai_dma_data capture_dma_config; +}; + +int lpc3xxx_pcm_register(struct platform_device *pdev); + +/* I2S controller register offsets */ +#define LPC3XXX_REG_I2S_DAO 0x00 +#define LPC3XXX_REG_I2S_DAI 0x04 +#define LPC3XXX_REG_I2S_TX_FIFO 0x08 +#define LPC3XXX_REG_I2S_RX_FIFO 0x0C +#define LPC3XXX_REG_I2S_STAT 0x10 +#define LPC3XXX_REG_I2S_DMA0 0x14 +#define LPC3XXX_REG_I2S_DMA1 0x18 +#define LPC3XXX_REG_I2S_IRQ 0x1C +#define LPC3XXX_REG_I2S_TX_RATE 0x20 +#define LPC3XXX_REG_I2S_RX_RATE 0x24 + +/* i2s_daO i2s_dai register definitions */ +#define LPC3XXX_I2S_WW8 FIELD_PREP(0x3, 0) /* Word width is 8bit */ +#define LPC3XXX_I2S_WW16 FIELD_PREP(0x3, 1) /* Word width is 16bit */ +#define LPC3XXX_I2S_WW32 FIELD_PREP(0x3, 3) /* Word width is 32bit */ +#define LPC3XXX_I2S_MONO BIT(2) /* Mono */ +#define LPC3XXX_I2S_STOP BIT(3) /* Stop, diables the access to FIFO, mutes the channel */ +#define LPC3XXX_I2S_RESET BIT(4) /* Reset the channel */ +#define LPC3XXX_I2S_WS_SEL BIT(5) /* Channel Master(0) or slave(1) mode select */ +#define LPC3XXX_I2S_WS_HP(s) FIELD_PREP(0x7FC0, s) /* Word select half period - 1 */ +#define LPC3XXX_I2S_MUTE BIT(15) /* Mute the channel, Transmit channel only */ + +#define LPC3XXX_I2S_WW32_HP 0x1f /* Word select half period for 32bit word width */ +#define LPC3XXX_I2S_WW16_HP 0x0f /* Word select half period for 16bit word width */ +#define LPC3XXX_I2S_WW8_HP 0x7 /* Word select half period for 8bit word width */ + +/* i2s_stat register definitions */ +#define LPC3XXX_I2S_IRQ_STAT BIT(0) +#define LPC3XXX_I2S_DMA0_REQ BIT(1) +#define LPC3XXX_I2S_DMA1_REQ BIT(2) + +/* i2s_dma0 Configuration register definitions */ +#define LPC3XXX_I2S_DMA0_RX_EN BIT(0) /* Enable RX DMA1 */ +#define LPC3XXX_I2S_DMA0_TX_EN BIT(1) /* Enable TX DMA1 */ +#define LPC3XXX_I2S_DMA0_RX_DEPTH(s) FIELD_PREP(0xF00, s) /* Set the DMA1 RX Request level */ +#define LPC3XXX_I2S_DMA0_TX_DEPTH(s) FIELD_PREP(0xF0000, s) /* Set the DMA1 TX Request level */ + +/* i2s_dma1 Configuration register definitions */ +#define LPC3XXX_I2S_DMA1_RX_EN BIT(0) /* Enable RX DMA1 */ +#define LPC3XXX_I2S_DMA1_TX_EN BIT(1) /* Enable TX DMA1 */ +#define LPC3XXX_I2S_DMA1_RX_DEPTH(s) FIELD_PREP(0x700, s) /* Set the DMA1 RX Request level */ +#define LPC3XXX_I2S_DMA1_TX_DEPTH(s) FIELD_PREP(0x70000, s) /* Set the DMA1 TX Request level */ + +/* i2s_irq register definitions */ +#define LPC3XXX_I2S_RX_IRQ_EN BIT(0) /* Enable RX IRQ */ +#define LPC3XXX_I2S_TX_IRQ_EN BIT(1) /* Enable TX IRQ */ +#define LPC3XXX_I2S_IRQ_RX_DEPTH(s) FIELD_PREP(0xFF00, s) /* valid values ar 0 to 7 */ +#define LPC3XXX_I2S_IRQ_TX_DEPTH(s) FIELD_PREP(0xFF0000, s) /* valid values ar 0 to 7 */ + +#endif diff --git a/sound/soc/fsl/lpc3xxx-pcm.c b/sound/soc/fsl/lpc3xxx-pcm.c new file mode 100644 index 000000000000..c0d499b9b8ba --- /dev/null +++ b/sound/soc/fsl/lpc3xxx-pcm.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// Author: Kevin Wells kevin.wells@nxp.com +// +// Copyright (C) 2008 NXP Semiconductors +// Copyright 2023 Timesys Corporation piotr.wojtaszczyk@timesys.com + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/amba/pl08x.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/dmaengine_pcm.h> +#include <sound/soc.h> + +#include "lpc3xxx-i2s.h" + +#define STUB_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_U8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_U16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_U24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE | \ + SNDRV_PCM_FMTBIT_U32_LE | \ + SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE) + +static const struct snd_pcm_hardware lpc3xxx_pcm_hardware = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_RESUME), + .formats = STUB_FORMATS, + .period_bytes_min = 128, + .period_bytes_max = 2048, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 128 * 1024 +}; + +static const struct snd_dmaengine_pcm_config lpc3xxx_dmaengine_pcm_config = { + .pcm_hardware = &lpc3xxx_pcm_hardware, + .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, + .compat_filter_fn = pl08x_filter_id, + .prealloc_buffer_size = 128 * 1024, +}; + +const struct snd_soc_component_driver lpc3xxx_soc_platform_driver = { + .name = "lpc32xx-pcm", +}; + +int lpc3xxx_pcm_register(struct platform_device *pdev) +{ + int ret; + + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, &lpc3xxx_dmaengine_pcm_config, 0); + if (ret) { + dev_err(&pdev->dev, "failed to register dmaengine: %d\n", ret); + return ret; + } + + return devm_snd_soc_register_component(&pdev->dev, &lpc3xxx_soc_platform_driver, + NULL, 0); +} +EXPORT_SYMBOL(lpc3xxx_pcm_register);