3 Jun
2009
3 Jun
'09
11:50 a.m.
At Wed, 3 Jun 2009 11:34:00 +0200, Alan Alan wrote:
Hello Takashi !
What should this patch do ?
The patch removes the restriction patch_nvhdmi.c sets. Instead, the driver tries to detect the supported format, rate, etc from the codec widget information.
Is it a cure for the 96, 192khz or 24bit sample playback problem ?
Possibly.
If so, will it resample or natievly pass the stream to the amplifier ?
It just enables the native support, possibly.
And, don't forget to give back the alsa-info.sh output (run with --no-upload option).
Takashi
Thank you
Alan
2009/6/3 Takashi Iwai tiwai@suse.de
At Wed, 3 Jun 2009 10:00:24 +0200, Alan Alan wrote: > > Hello Wei ! > > Thanks for replying. > I tested it with speaker-test and xbmc babylon. Both had problems with > channel mapping. > I used this command: > > speaker-test -Dhdmi -c6 > or > speaker-test -Dhdmi -c8 > > alternatively you could try > > speaker-test -Dhw:0,3 -c6 > > > I had to rund Xorg first and have the command from an xterm, becasue from a > normal terminal it would not work. > I think that is normal as a limitation of hdmi. > > What about the support for 24bits 192khz sound ? > > speaker-test -Dhdmi -c6 -r192000 does not work. How about the patch below? Also, could you give alsa-info.sh output? Takashi --- diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c index f5792e2..48443de 100644 --- a/sound/pci/hda/patch_nvhdmi.c +++ b/sound/pci/hda/patch_nvhdmi.c @@ -258,9 +258,11 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = { .channels_min = 2, .channels_max = 8, .nid = Nv_Master_Convert_nid, +#if 0 .rates = SNDRV_PCM_RATE_48000, .maxbps = 16, .formats = SNDRV_PCM_FMTBIT_S16_LE, +#endif .ops = { .open = nvhdmi_dig_playback_pcm_open, .close = nvhdmi_dig_playback_pcm_close_8ch, @@ -273,9 +275,11 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = { .channels_min = 2, .channels_max = 2, .nid = Nv_Master_Convert_nid, +#if 0 .rates = SNDRV_PCM_RATE_48000, .maxbps = 16, .formats = SNDRV_PCM_FMTBIT_S16_LE, +#endif .ops = { .open = nvhdmi_dig_playback_pcm_open, .close = nvhdmi_dig_playback_pcm_close_2ch,