On 11/16/2021 5:06 AM, Stephen Boyd wrote: Thanks for Your time Stephen!!! As this patch is already accepted, will post your review comments as additional patch.
Quoting Srinivasa Rao Mandadapu (2021-11-14 23:11:28)
diff --git a/sound/soc/codecs/wcd-mbhc-v2.c b/sound/soc/codecs/wcd-mbhc-v2.c index 405128c..d6545e4 100644 --- a/sound/soc/codecs/wcd-mbhc-v2.c +++ b/sound/soc/codecs/wcd-mbhc-v2.c @@ -1022,6 +1022,56 @@ static int wcd_mbhc_get_plug_from_adc(struct wcd_mbhc *mbhc, int adc_result) return plug_type; }
+static int wcd_mbhc_get_spl_hs_thres(struct wcd_mbhc *mbhc) +{
int hs_threshold, micbias_mv;
micbias_mv = wcd_mbhc_get_micbias(mbhc);
if (mbhc->cfg->hs_thr && mbhc->cfg->micb_mv != WCD_MBHC_ADC_MICBIAS_MV) {
if (mbhc->cfg->micb_mv == micbias_mv)
hs_threshold = mbhc->cfg->hs_thr;
else
hs_threshold = (mbhc->cfg->hs_thr * micbias_mv) / mbhc->cfg->micb_mv;
} else {
hs_threshold = ((WCD_MBHC_ADC_HS_THRESHOLD_MV * micbias_mv) /
WCD_MBHC_ADC_MICBIAS_MV);
}
return hs_threshold;
+}
+static bool wcd_mbhc_check_for_spl_headset(struct wcd_mbhc *mbhc) +{
bool is_spl_hs = false;
int output_mv, hs_threshold, hph_threshold;
if (!mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic)
return false;
/* Bump up MIC_BIAS2 to 2.7V */
mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic(mbhc->component, MIC_BIAS_2, true);
usleep_range(10000, 10100);
output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P);
hs_threshold = wcd_mbhc_get_spl_hs_thres(mbhc);
hph_threshold = wcd_mbhc_adc_get_hph_thres(mbhc);
if (output_mv > hs_threshold || output_mv < hph_threshold) {
if (mbhc->force_linein == true)
Just 'if (mbhc->force_linein)'
Also, if this is false, then false is set above. So checking for mbhc->force_linein is useless.
Okay. Will check and do changes.
is_spl_hs = false;
} else {
is_spl_hs = true;
}
/* Back MIC_BIAS2 to 1.8v if the type is not special headset */
if (!is_spl_hs) {
mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic(mbhc->component, MIC_BIAS_2, false);
/* Add 10ms delay for micbias to settle */
usleep_range(10000, 10100);
}
return is_spl_hs;
+}
- static void wcd_correct_swch_plug(struct work_struct *work) { struct wcd_mbhc *mbhc;
@@ -1029,12 +1079,14 @@ static void wcd_correct_swch_plug(struct work_struct *work) enum wcd_mbhc_plug_type plug_type = MBHC_PLUG_TYPE_INVALID; unsigned long timeout; int pt_gnd_mic_swap_cnt = 0;
int output_mv, cross_conn, hs_threshold, try = 0;
int output_mv, cross_conn, hs_threshold, try = 0, micbias_mv;
bool is_spl_hs = false; bool is_pa_on; mbhc = container_of(work, struct wcd_mbhc, correct_plug_swch); component = mbhc->component;
micbias_mv = wcd_mbhc_get_micbias(mbhc); hs_threshold = wcd_mbhc_adc_get_hs_thres(mbhc); /* Mask ADC COMPLETE interrupt */
@@ -1097,6 +1149,16 @@ static void wcd_correct_swch_plug(struct work_struct *work) plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv); is_pa_on = wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN);
if ((output_mv > hs_threshold) && (!is_spl_hs)) {
Please drop useless parenthesis
Okay.
is_spl_hs = wcd_mbhc_check_for_spl_headset(mbhc);
output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P);
if (is_spl_hs) {
hs_threshold = (hs_threshold * wcd_mbhc_get_micbias(mbhc)) /
micbias_mv;
Same. It may be good to split it to two assignments to clarify overflow/underflow.
Okay.
}
}
if ((output_mv <= hs_threshold) && !is_pa_on) { /* Check for cross connection*/ cross_conn = wcd_check_cross_conn(mbhc);
@@ -1122,14 +1184,19 @@ static void wcd_correct_swch_plug(struct work_struct *work) } }
if (output_mv > hs_threshold) /* cable is extension cable */
/* cable is extension cable */
if (output_mv > hs_threshold || mbhc->force_linein == true)
Drop the == true please.
Okay.
plug_type = MBHC_PLUG_TYPE_HIGH_HPH; } wcd_mbhc_bcs_enable(mbhc, plug_type, true);
if (plug_type == MBHC_PLUG_TYPE_HIGH_HPH)
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 1);
if (plug_type == MBHC_PLUG_TYPE_HIGH_HPH) {
if (is_spl_hs)
plug_type = MBHC_PLUG_TYPE_HEADSET;
else
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 1);
} wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0); wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);