From: Stefan Binding sbinding@opensource.cirrus.com
Some of the register values set for type detection cause pops during suspend, ensure these are cleaned up after type detection completes, as well ensuring that these are cleared when we suspend.
Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com Signed-off-by: Vitaly Rodionov vitalyr@opensource.cirrus.com --- sound/pci/hda/patch_cs8409.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/pci/hda/patch_cs8409.c b/sound/pci/hda/patch_cs8409.c index 272497b6cfcb..9db16b6292f4 100644 --- a/sound/pci/hda/patch_cs8409.c +++ b/sound/pci/hda/patch_cs8409.c @@ -708,6 +708,10 @@ static int cs42l42_jack_unsol_event(struct sub_codec *cs42l42) cs42l42->mic_jack_in = 1; } } + /* Configure the HSDET mode. */ + cs8409_i2c_write(cs42l42, 0x1120, 0x80); + /* Enable the HPOUT ground clamp and configure the HP pull-down */ + cs8409_i2c_write(cs42l42, 0x1F06, 0x02); /* Re-Enable Tip Sense Interrupt */ cs8409_i2c_write(cs42l42, 0x1320, 0xF3); } else { @@ -756,6 +760,8 @@ static void cs42l42_suspend(struct sub_codec *cs42l42) unsigned int gpio_data; int reg_cdc_status = 0; const struct cs8409_i2c_param cs42l42_pwr_down_seq[] = { + { 0x1F06, 0x02 }, + { 0x1129, 0x00 }, { 0x2301, 0x3F }, { 0x2302, 0x3F }, { 0x2303, 0x3F },