From: Vinod Koul vinod.koul@intel.com
The SKL also supports HDMI output so in probe we need to enable the HDMI using common i915 APIs to ensure it gets probed on the bus
After S3 during the controller resequencing the codec domain need to be kept ON for successful reconfiguration of Codec. Once configured it will be turned OFF in codec driver.
Signed-off-by: Vinod Koul vinod.koul@intel.com Signed-off-by: Subhransu S. Prusty subhransu.s.prusty@intel.com --- sound/soc/intel/Kconfig | 1 + sound/soc/intel/skylake/skl.c | 51 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+)
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 7d7c872..008baa5 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -163,6 +163,7 @@ config SND_SOC_INTEL_SKYLAKE tristate select SND_HDA_EXT_CORE select SND_SOC_TOPOLOGY + select SND_HDA_I915 select SND_SOC_INTEL_SST
config SND_SOC_INTEL_SKL_RT286_MACH diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 06f4b2c..7f4909b 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -28,6 +28,9 @@ #include <linux/firmware.h> #include <sound/pcm.h> #include "../common/sst-acpi.h" +#include <sound/hda_register.h> +#include <sound/hdaudio.h> +#include <sound/hda_i915.h> #include "skl.h" #include "skl-sst-dsp.h" #include "skl-sst-ipc.h" @@ -243,6 +246,16 @@ static int skl_resume(struct device *dev) struct hdac_bus *bus = ebus_to_hbus(ebus); int ret;
+ /* Turned OFF in HDMI codec driver after codec reconfiguration */ + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { + ret = snd_hdac_display_power(bus, true); + if (ret < 0) { + dev_err(bus->dev, + "Cannot turn on display power on i915\n"); + return ret; + } + } + /* * resume only when we are not in suspend active, otherwise need to * restore the device @@ -481,6 +494,27 @@ static int skl_create(struct pci_dev *pci, return 0; }
+static int skl_i915_init(struct hdac_bus *bus) +{ + int err; + + /* + * The HDMI codec is in GPU so we need to ensure that it is powered + * up and ready for probe + */ + err = snd_hdac_i915_init(bus); + if (err < 0) + return err; + + err = snd_hdac_display_power(bus, true); + if (err < 0) { + dev_err(bus->dev, "Cannot turn on display power on i915\n"); + return err; + } + + return err; +} + static int skl_first_init(struct hdac_ext_bus *ebus) { struct skl *skl = ebus_to_skl(ebus); @@ -543,6 +577,12 @@ static int skl_first_init(struct hdac_ext_bus *ebus) /* initialize chip */ skl_init_pci(skl);
+ if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { + err = skl_i915_init(bus); + if (err < 0) + return err; + } + skl_init_chip(bus, true);
/* codec detection */ @@ -613,6 +653,14 @@ static int skl_probe(struct pci_dev *pci, if (err < 0) goto out_unregister;
+ if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { + err = snd_hdac_display_power(bus, false); + if (err < 0) { + dev_err(bus->dev, "Cannot turn off display power on i915\n"); + return err; + } + } + /*configure PM */ pm_runtime_put_noidle(bus->dev); pm_runtime_allow(bus->dev); @@ -667,6 +715,9 @@ static void skl_remove(struct pci_dev *pci) if (skl->tplg) release_firmware(skl->tplg);
+ if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) + snd_hdac_i915_exit(&ebus->bus); + if (pci_dev_run_wake(pci)) pm_runtime_get_noresume(&pci->dev); pci_dev_put(pci);