The patch
ASoC: nau8825: improve crosstalk measurement protection
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From fa25b4f59f1de9536104b632ec4c4c0b8f8e54ec Mon Sep 17 00:00:00 2001
From: John Hsu KCHSU0@nuvoton.com Date: Fri, 1 Dec 2017 10:01:37 +0800 Subject: [PATCH] ASoC: nau8825: improve crosstalk measurement protection
The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference.
Signed-off-by: John Hsu KCHSU0@nuvoton.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/nau8825.c | 45 +++++++++++++++++++++++++++++++-------------- sound/soc/codecs/nau8825.h | 1 + 2 files changed, 32 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 5778eadbf9e6..2aea642b4a5d 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -194,10 +194,10 @@ static const struct reg_default nau8825_reg_defaults[] = {
/* register backup table when cross talk detection */ static struct reg_default nau8825_xtalk_baktab[] = { - { NAU8825_REG_ADC_DGAIN_CTRL, 0 }, + { NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf }, { NAU8825_REG_HSVOL_CTRL, 0 }, - { NAU8825_REG_DACL_CTRL, 0 }, - { NAU8825_REG_DACR_CTRL, 0 }, + { NAU8825_REG_DACL_CTRL, 0x00cf }, + { NAU8825_REG_DACR_CTRL, 0x02cf }, };
static const unsigned short logtable[256] = { @@ -455,22 +455,32 @@ static void nau8825_xtalk_backup(struct nau8825 *nau8825) { int i;
+ if (nau8825->xtalk_baktab_initialized) + return; + /* Backup some register values to backup table */ for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg, &nau8825_xtalk_baktab[i].def); + + nau8825->xtalk_baktab_initialized = true; }
-static void nau8825_xtalk_restore(struct nau8825 *nau8825) +static void nau8825_xtalk_restore(struct nau8825 *nau8825, bool cause_cancel) { int i, volume;
+ if (!nau8825->xtalk_baktab_initialized) + return; + /* Restore register values from backup table; When the driver restores - * the headphone volumem, it needs recover to original level gradually - * with 3dB per step for less pop noise. + * the headphone volume in XTALK_DONE state, it needs recover to + * original level gradually with 3dB per step for less pop noise. + * Otherwise, the restore should do ASAP. */ for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) { - if (nau8825_xtalk_baktab[i].reg == NAU8825_REG_HSVOL_CTRL) { + if (!cause_cancel && nau8825_xtalk_baktab[i].reg == + NAU8825_REG_HSVOL_CTRL) { /* Ramping up the volume change to reduce pop noise */ volume = nau8825_xtalk_baktab[i].def & NAU8825_HPR_VOL_MASK; @@ -480,6 +490,8 @@ static void nau8825_xtalk_restore(struct nau8825 *nau8825) regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg, nau8825_xtalk_baktab[i].def); } + + nau8825->xtalk_baktab_initialized = false; }
static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825) @@ -645,7 +657,7 @@ static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825) NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0); }
-static void nau8825_xtalk_clean(struct nau8825 *nau8825) +static void nau8825_xtalk_clean(struct nau8825 *nau8825, bool cause_cancel) { /* Enable internal VCO needed for interruptions */ nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); @@ -661,7 +673,7 @@ static void nau8825_xtalk_clean(struct nau8825 *nau8825) NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE); /* Restore value of specific register for cross talk */ - nau8825_xtalk_restore(nau8825); + nau8825_xtalk_restore(nau8825, cause_cancel); }
static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol) @@ -780,7 +792,7 @@ static void nau8825_xtalk_measure(struct nau8825 *nau8825) dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone); regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL, (sidetone << 8) | sidetone); - nau8825_xtalk_clean(nau8825); + nau8825_xtalk_clean(nau8825, false); nau8825->xtalk_state = NAU8825_XTALK_DONE; break; default: @@ -823,7 +835,7 @@ static void nau8825_xtalk_cancel(struct nau8825 *nau8825) if (nau8825->xtalk_enable && nau8825->xtalk_state != NAU8825_XTALK_DONE) { cancel_work_sync(&nau8825->xtalk_work); - nau8825_xtalk_clean(nau8825); + nau8825_xtalk_clean(nau8825, true); } /* Reset parameters for cross talk suppression function */ nau8825_sema_reset(nau8825); @@ -1713,8 +1725,11 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) nau8825->xtalk_protect = false; } /* Startup cross talk detection process */ - nau8825->xtalk_state = NAU8825_XTALK_PREPARE; - schedule_work(&nau8825->xtalk_work); + if (nau8825->xtalk_protect) { + nau8825->xtalk_state = + NAU8825_XTALK_PREPARE; + schedule_work(&nau8825->xtalk_work); + } } else { /* The cross talk suppression shouldn't apply * in the headset with high impedance. Thus, @@ -1741,7 +1756,8 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) nau8825->xtalk_event_mask = event_mask; } } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { - if (nau8825->xtalk_enable) + /* crosstalk detection enable and process on going */ + if (nau8825->xtalk_enable && nau8825->xtalk_protect) schedule_work(&nau8825->xtalk_work); clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) == @@ -2578,6 +2594,7 @@ static int nau8825_i2c_probe(struct i2c_client *i2c, */ nau8825->xtalk_state = NAU8825_XTALK_DONE; nau8825->xtalk_protect = false; + nau8825->xtalk_baktab_initialized = false; sema_init(&nau8825->xtalk_sem, 1); INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work);
diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 199d6ea4dcdc..f7e732125882 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -477,6 +477,7 @@ struct nau8825 { bool xtalk_protect; int imp_rms[NAU8825_XTALK_IMM]; int xtalk_enable; + bool xtalk_baktab_initialized; /* True if initialized. */ };
int nau8825_enable_jack_detect(struct snd_soc_codec *codec,