-----Original Message----- From: Ville Syrjälä [mailto:ville.syrjala@linux.intel.com] Sent: Monday, August 24, 2015 8:53 PM To: Yang, Libin Cc: alsa-devel@alsa-project.org; tiwai@suse.de; intel- gfx@lists.freedesktop.org; daniel.vetter@ffwll.ch; jani.nikula@linux.intel.com Subject: Re: [Intel-gfx] [PATCH v5 2/4] drm/i915: implement sync_audio_rate callback
On Mon, Aug 24, 2015 at 02:38:14AM +0000, Yang, Libin wrote:
-----Original Message----- From: Ville Syrjälä [mailto:ville.syrjala@linux.intel.com] Sent: Friday, August 21, 2015 11:14 PM To: Yang, Libin Cc: alsa-devel@alsa-project.org; tiwai@suse.de; intel- gfx@lists.freedesktop.org; daniel.vetter@ffwll.ch; jani.nikula@linux.intel.com Subject: Re: [Intel-gfx] [PATCH v5 2/4] drm/i915: implement sync_audio_rate callback
On Tue, Aug 18, 2015 at 02:51:52PM +0800, libin.yang@intel.com wrote:
From: Libin Yang libin.yang@intel.com
HDMI audio may not work at some frequencies with the HW provided N/CTS.
This patch sets the proper N value for the given audio sample rate at the impacted frequencies. At other frequencies, it will use the N/CTS value which HW provides.
Signed-off-by: Libin Yang libin.yang@intel.com
drivers/gpu/drm/i915/intel_audio.c | 119
+++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_audio.c
b/drivers/gpu/drm/i915/intel_audio.c
index dc32cf4..96b97be 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -68,6 +68,31 @@ static const struct { { 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 }, };
+/* HDMI N/CTS table */ +#define TMDS_297M 297000 +#define TMDS_296M DIV_ROUND_UP(297000 * 1000, 1001)
I don't really like the defines.
I agree it's not a good name. Do you have some suggestions?
I'd probably just have used raw numbers myself.
+static const struct {
- int sample_rate;
- int clock;
- int n;
- int cts;
+} aud_ncts[] = {
- { 44100, TMDS_296M, 4459, 234375 },
- { 44100, TMDS_297M, 4704, 247500 },
- { 48000, TMDS_296M, 5824, 281250 },
- { 48000, TMDS_297M, 5120, 247500 },
- { 32000, TMDS_296M, 5824, 421875 },
- { 32000, TMDS_297M, 3072, 222750 },
- { 88200, TMDS_296M, 8918, 234375 },
- { 88200, TMDS_297M, 9408, 247500 },
- { 96000, TMDS_296M, 11648, 281250 },
- { 96000, TMDS_297M, 10240, 247500 },
- { 176400, TMDS_296M, 17836, 234375 },
- { 176400, TMDS_297M, 18816, 247500 },
- { 44100, TMDS_296M, 23296, 281250 },
- { 44100, TMDS_297M, 20480, 247500 },
+};
Last two should be 192 kHz. All the other values seem to match the spec.
Oh, my typo. Thanks for pointing it out.
These do assume 8bpc, but as the spec doesn't even specify N/CTS values for deep color modes @ 297MHz, so I suppose the
expectations
is that the max TMDS clock will never be so high as to allow them.
If/when we start using manual programming for other TMDS clock rates we'll need to consider 12bpc as well.
These values are recommended from HDMI spec. It's not related to the bpp. Am I wrong? I'm find the value from HDMISpecification 1.4: table 7-1, table 7-2 and table 7-3.
There are separate tables for deep color modes in appendix D. Tables D-1 through D-3 are of interest to us since we can only do the 12bpc deep color mode.
Yes, we found the D tables in the spec before, and it seems a little Complicated. And the table 7-x seems to be more general. This is the reason we use table 7-x.
OK. We will use D-1, D-2 and D-3 table for N/CTS.
/* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */ static u32 audio_config_hdmi_pixel_clock(struct
drm_display_mode
*mode)
{ @@ -90,6 +115,31 @@ static u32
audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
return hdmi_audio_clock[i].config; }
+static int audio_config_get_n(struct drm_display_mode *mode,
int
rate)
mode can be const.
OK. I will change it.
+{
- int i;
- for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
if ((rate == aud_ncts[i].sample_rate) &&(mode->clock == aud_ncts[i].clock)) {return aud_ncts[i].n;}- }
- return 0;
+}
+/* check whether N/CTS/M need be set manually */ +static bool audio_rate_need_prog(struct intel_crtc *crtc,
struct drm_display_mode*mode)
+{
- if (((mode->clock == TMDS_297M) ||
(mode->clock == TMDS_296M)) &&intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))return true;- else
return false;+}
static bool intel_eld_uptodate(struct drm_connector *connector, int reg_eldv, uint32_t bits_eldv, int reg_elda, uint32_t bits_elda, @@ -514,12 +564,81 @@ static int
i915_audio_component_get_cdclk_freq(struct device *dev)
return ret; }
+static int i915_audio_component_sync_audio_rate(struct device
*dev,
int port, int rate)+{
- struct drm_i915_private *dev_priv = dev_to_i915(dev);
- struct drm_device *drm_dev = dev_priv->dev;
- struct intel_encoder *intel_encoder;
- struct intel_digital_port *intel_dig_port;
- struct intel_crtc *crtc;
- struct drm_display_mode *mode;
- enum pipe pipe = -1;
- u32 tmp;
- int n_low, n_up, n;
- /* 1. get the pipe */
- for_each_intel_encoder(drm_dev, intel_encoder) {
if (intel_encoder->type != INTEL_OUTPUT_HDMI)continue;intel_dig_port = enc_to_dig_port(&intel_encoder-base);
if (port == intel_dig_port->port) {crtc = to_intel_crtc(intel_encoder->base.crtc);This sort of thing would need some locking to safely start digging
at
the modeset state.
I would probably not do that, and instead add some new lock(s) for
this.
The modeset code would then fill out some relevant information protected by that same lock, and this function could then go look at it
without
having to worry about the rest of modeset locking/state.
From audio side, there is no competition when calling the function,
I think. For protecting the competition between audio and gfx driver, it seems we need use the lock from gfx side. Do you have suggested lock I can use?
To do it like this we'd need pretty much all the modeset locks, which to me feels a bit troublesome if the audio driver can call this at any point. So I suggested that we may want to add some kind of new audio lock to i915.
If we are using a new audio lock, I believe we still need use the lock when gfx is doing the modeset. Only adding the new lock in the function i915_audio_component_sync_audio_rate() is not enough because gfx driver will still modify it without locking.
I'm not sure where to add the lock in the gfx driver.
Regards, Libin
if (!crtc) {DRM_DEBUG_KMS("%s: crtc isNULL\n", __func__);
continue;}pipe = crtc->pipe;break;}- }
- if (pipe == INVALID_PIPE) {
DRM_DEBUG_KMS("no pipe for the port %c\n",port_name(port));
return -ENODEV;- }
- DRM_DEBUG_KMS("pipe %c connects port %c\n",
pipe_name(pipe), port_name(port));- mode = &crtc->config->base.adjusted_mode;
- /* 2. check whether to set the N/CTS/M manually or not */
- if (!audio_rate_need_prog(crtc, mode)) {
tmp = I915_READ(HSW_AUD_CFG(pipe));tmp &= ~AUD_CONFIG_N_PROG_ENABLE;I915_WRITE(HSW_AUD_CFG(pipe), tmp);This stuff would need to be abstracted to work on pre-HSW too.
Right, I need judge the platform firstly.
return 0;- }
- n = audio_config_get_n(mode, rate);
- if (n == 0) {
DRM_DEBUG_KMS("Using automatic mode for N valueon port %c\n",
port_name(port));tmp = I915_READ(HSW_AUD_CFG(pipe));tmp &= ~AUD_CONFIG_N_PROG_ENABLE;I915_WRITE(HSW_AUD_CFG(pipe), tmp);return 0;- }
- n_low = n & 0xfff;
- n_up = (n >> 12) & 0xff;
- /* 4. set the N/CTS/M */
- tmp = I915_READ(HSW_AUD_CFG(pipe));
- tmp &= ~(AUD_CONFIG_UPPER_N_MASK |
AUD_CONFIG_LOWER_N_MASK);
- tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
(n_low << AUD_CONFIG_LOWER_N_SHIFT) |AUD_CONFIG_N_PROG_ENABLE);- I915_WRITE(HSW_AUD_CFG(pipe), tmp);
- return 0;
+}
static const struct i915_audio_component_ops
i915_audio_component_ops = {
.owner = THIS_MODULE, .get_power = i915_audio_component_get_power, .put_power = i915_audio_component_put_power, .codec_wake_override =
i915_audio_component_codec_wake_override,
.get_cdclk_freq = i915_audio_component_get_cdclk_freq,
- .sync_audio_rate = i915_audio_component_sync_audio_rate,
};
static int i915_audio_component_bind(struct device *i915_dev,
1.9.1
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
-- Ville Syrjälä Intel OTC
-- Ville Syrjälä Intel OTC