The "wlf,spkvdd-ena" GPIO needed by the bytcr_wm5102 driver is made available through a gpio-lookup table.
This gpio-lookup table is registered by drivers/mfd/arizona-spi.c, which may get probed after the bytcr_wm5102 driver.
If the gpio-lookup table has not registered yet then the gpiod_get() will return -ENOENT. Treat -ENOENT as -EPROBE_DEFER to still keep things working in this case.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/intel/boards/bytcr_wm5102.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_wm5102.c b/sound/soc/intel/boards/bytcr_wm5102.c index 00384c6fbcaa..330c0ace1638 100644 --- a/sound/soc/intel/boards/bytcr_wm5102.c +++ b/sound/soc/intel/boards/bytcr_wm5102.c @@ -421,8 +421,17 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) priv->spkvdd_en_gpio = gpiod_get(codec_dev, "wlf,spkvdd-ena", GPIOD_OUT_LOW); put_device(codec_dev);
- if (IS_ERR(priv->spkvdd_en_gpio)) - return dev_err_probe(dev, PTR_ERR(priv->spkvdd_en_gpio), "getting spkvdd-GPIO\n"); + if (IS_ERR(priv->spkvdd_en_gpio)) { + ret = PTR_ERR(priv->spkvdd_en_gpio); + /* + * The spkvdd gpio-lookup is registered by: drivers/mfd/arizona-spi.c, + * so -ENOENT means that arizona-spi hasn't probed yet. + */ + if (ret == -ENOENT) + ret = -EPROBE_DEFER; + + return dev_err_probe(dev, ret, "getting spkvdd-GPIO\n"); + }
/* override platform name, if required */ byt_wm5102_card.dev = dev;