Change the listed examples to use more generic node names, representing the class of the device nodes:
- apr-service@<id> - dai@<id>
Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi.
Also add #address-cells + #size-cells to the q6asm example, without them the example produces dtc warnings.
Cc: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Stephan Gerhold stephan@gerhold.net --- .../devicetree/bindings/sound/qcom,q6adm.txt | 2 +- .../devicetree/bindings/sound/qcom,q6afe.txt | 46 +++++++++---------- .../devicetree/bindings/sound/qcom,q6asm.txt | 7 ++- .../devicetree/bindings/sound/qcom,q6core.txt | 2 +- 4 files changed, 30 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt index bbae426cdfb1..15c353a20de8 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt @@ -29,7 +29,7 @@ used by the apr service device. Definition: Must be 0
= EXAMPLE -q6adm@8 { +apr-service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; q6routing: routing { diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt index d74888b9f1bb..4916dd6a0896 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
= EXAMPLE
-q6afe@4 { +apr-service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>;
@@ -110,12 +110,12 @@ q6afe@4 { #address-cells = <1>; #size-cells = <0>;
- hdmi@1 { - reg = <1>; + dai@1 { + reg = <HDMI_RX>; };
- tdm@24 { - reg = <24>; + dai@24 { + reg = <PRIMARY_TDM_RX_0>; qcom,tdm-sync-mode = <1>: qcom,tdm-sync-src = <1>; qcom,tdm-data-out = <0>; @@ -125,8 +125,8 @@ q6afe@4 {
};
- tdm@25 { - reg = <25>; + dai@25 { + reg = <PRIMARY_TDM_TX_0>; qcom,tdm-sync-mode = <1>: qcom,tdm-sync-src = <1>; qcom,tdm-data-out = <0>; @@ -135,43 +135,43 @@ q6afe@4 { qcom,tdm-data-align = <0>; };
- prim-mi2s-rx@16 { - reg = <16>; + dai@16 { + reg = <PRIMARY_MI2S_RX>; qcom,sd-lines = <0 2>; };
- prim-mi2s-tx@17 { - reg = <17>; + dai@17 { + reg = <PRIMARY_MI2S_TX>; qcom,sd-lines = <1>; };
- sec-mi2s-rx@18 { - reg = <18>; + dai@18 { + reg = <SECONDARY_MI2S_RX>; qcom,sd-lines = <0 3>; };
- sec-mi2s-tx@19 { - reg = <19>; + dai@19 { + reg = <SECONDARY_MI2S_TX>; qcom,sd-lines = <1>; };
- tert-mi2s-rx@20 { - reg = <20>; + dai@20 { + reg = <TERTIARY_MI2S_RX>; qcom,sd-lines = <1 3>; };
- tert-mi2s-tx@21 { - reg = <21>; + dai@21 { + reg = <TERTIARY_MI2S_TX>; qcom,sd-lines = <0>; };
- quat-mi2s-rx@22 { - reg = <22>; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; qcom,sd-lines = <0>; };
- quat-mi2s-tx@23 { - reg = <23>; + dai@23 { + reg = <QUATERNARY_MI2S_TX>; qcom,sd-lines = <1>; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt index 9f5378c51686..6b9a88d0ea3f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt @@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
= EXAMPLE
-q6asm@7 { +apr-service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; q6asmdai: dais { compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; #sound-dai-cells = <1>; - mm@0 { + + dai@0 { reg = <0>; direction = <2>; is-compress-dai; diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt index 7f36ff8bec18..5cd4cc9b1fde 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt @@ -15,7 +15,7 @@ used by the apr service device. example "qcom,q6core-v2.0"
= EXAMPLE -q6core@3 { +apr-service@3 { compatible = "qcom,q6core"; reg = <APR_SVC_ADSP_CORE>; };