The port sample interval was always 16-bit, split into low and high bytes. This split was unnecessary, although harmless for older devices because all of them used only lower byte (so values < 0xff). With support for Soundwire controller on Qualcomm SM8550 and its devices, both bytes will be used, thus add a new 'qcom,ports-sinterval' property to allow 16-bit sample intervals.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- .../bindings/soundwire/qcom,soundwire.yaml | 22 +++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index 3efdc192ab01..e2acfd09fb22 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -85,7 +85,7 @@ properties: qcom,ports-sinterval-low: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Sample interval low of each data port. + Sample interval (only lowest byte) of each data port. Out ports followed by In ports. Used for Sample Interval calculation. Value of 0xff indicates that this option is not implemented or applicable for the respective data port. @@ -93,6 +93,19 @@ properties: minItems: 3 maxItems: 8
+ qcom,ports-sinterval: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Sample interval of each data port. + Out ports followed by In ports. Used for Sample Interval calculation. + Value of 0xffff indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 8 + items: + maximum: 0xffff + qcom,ports-offset1: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -218,10 +231,15 @@ required: - '#size-cells' - qcom,dout-ports - qcom,din-ports - - qcom,ports-sinterval-low - qcom,ports-offset1 - qcom,ports-offset2
+oneOf: + - required: + - qcom,ports-sinterval + - required: + - qcom,ports-sinterval-low + additionalProperties: false
examples: