The patch
ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 969cc0528e0efdfdeaa5bbc0ab707d8a7819a8ec Mon Sep 17 00:00:00 2001
From: Cyrille Pitchen cyrille.pitchen@atmel.com Date: Fri, 25 May 2018 15:34:25 +0300 Subject: [PATCH] ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller
This patch adds DT bindings for the new Atmel I2S controller embedded inside sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen cyrille.pitchen@atmel.com Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown broonie@kernel.org --- .../devicetree/bindings/sound/atmel-i2s.txt | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/atmel-i2s.txt
diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt new file mode 100644 index 000000000000..735368b8a73f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel-i2s.txt @@ -0,0 +1,47 @@ +* Atmel I2S controller + +Required properties: +- compatible: Should be "atmel,sama5d2-i2s". +- reg: Should be the physical base address of the controller and the + length of memory mapped region. +- interrupts: Should contain the interrupt for the controller. +- dmas: Should be one per channel name listed in the dma-names property, + as described in atmel-dma.txt and dma.txt files. +- dma-names: Two dmas have to be defined, "tx" and "rx". + This IP also supports one shared channel for both rx and tx; + if this mode is used, one "rx-tx" name must be used. +- clocks: Must contain an entry for each entry in clock-names. + Please refer to clock-bindings.txt. +- clock-names: Should be one of each entry matching the clocks phandles list: + - "pclk" (peripheral clock) Required. + - "gclk" (generated clock) Optional (1). + - "aclk" (Audio PLL clock) Optional (1). + - "muxclk" (I2S mux clock) Optional (1). + +Optional properties: +- pinctrl-0: Should specify pin control groups used for this controller. +- princtrl-names: Should contain only one value - "default". + + +(1) : Only the peripheral clock is required. The generated clock, the Audio + PLL clock adn the I2S mux clock are optional and should only be set + together, when Master Mode is required. + +Example: + + i2s@f8050000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xf8050000 0x300>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>; + dma-names = "tx", "rx"; + clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>; + clock-names = "pclk", "gclk", "aclk", "muxclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s0_default>; + };