-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
? 2014?02?03? 19:14, Takashi Iwai ??:
At Mon, 3 Feb 2014 19:10:58 +0800, Randy Li wrote:
? 2014?02?03? 19:07, Takashi Iwai ??:
At Mon, 3 Feb 2014 15:01:00 +0800, Randy Li wrote:
Hello My mainboard is ECS A780GM-A, the sound chip in it is IDT 82HD206XX6, it shows that below 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) Subsystem: Elitegroup Computer Systems Device 2816 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort-
SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16 Region 0: Memory at f9ff0000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: snd_hda_intel
In my bios I don't have a switch to make the font port mode into AC97 or HD Audio. In windows you need to install a driver and set the font port into AC97.
HD-audio front panel should be connected in HD-audio mode. Otherwise something must go wrong.
But I can't, the hardware of font port is a AC97 port, not a HD-audio one. And as I have mentioned before, in BIOS, there is no such option to switch the font port mode between HD-audio nor AC97. In windows, you have to do that with driver's control panel.
Then you can't expect that everything works. For example, the jack detection is known to be broken if you connect with AC97 panel. For disabling the jack detection, put "jack_detect = no" to the hint in the early patching. See Documentation/sound/alsa/HD-audio.txt for details.
I use pulseaudio, I will have a try.
For fixing the rest, the disordered channels, you need to identify which pin corresponds to which I/O, then remap via pincfg in the early patching. hda_analyzer and hda-jack-retask would be your help.
Sadness, I lack the knowledge of sound driver, I will try to learn more.
Takashi
In Linux, you can use the font port, but it seems that audio channel is wrong, I can't hear the sound in some part of a film and I can hear the stranger accent of sound in the other part of a film(or a music). But all the 7.1 channel in the back ports can output the sound match my mircophone(all are the same). How to fix the problem?
You need to switch to HD-audio mode, at first.
Takashi
Kernel is 3.4.77
ayaka
Thank you every much ayaka