On 04/06/2012 03:34 PM, Michael Karcher wrote:
name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls affecting those pins.
If this is a test mixer only, so maybe it does not matter that much, but anyway:
Loopback controls are usually labeled
"Line Playback Volume" "Mic Playback Volume"
And outputs:
"Headphone Playback Volume"
For line outputs, I'm not sure if the right thing is
"Front Playback Volume", "Line-Out Playback Volume", or "Line Out Playback Volume"
remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1
really select MIC1, not Mixer out for recording
"Mixer out" for recording is not a "pin", adjust comment
Signed-off-by: Michael Karcherkernel@mkarcher.dialup.fu-berlin.de
sound/pci/hda/patch_conexant.c | 38 +++++++++++++++++--------------------- 1 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 8fe9f9d..a36488d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -930,10 +930,10 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = { /* Output controls */ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x10, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Speaker Playback Switch", 0x10, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Node 11 Playback Volume", 0x11, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Node 11 Playback Switch", 0x11, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Node 12 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Node 12 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("HP-OUT Playback Volume", 0x11, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("HP-OUT Playback Switch", 0x11, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("LINE1 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
/* Modes for retasking pin widgets */ CXT_PIN_MODE("HP-OUT pin mode", 0x11, CXT_PIN_DIR_INOUT),
@@ -944,16 +944,16 @@ static const struct snd_kcontrol_new cxt5045_test_mixer[] = {
/* Loopback mixer controls */
- HDA_CODEC_VOLUME("Mixer-1 Volume", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-1 Switch", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-2 Volume", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-2 Switch", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-3 Volume", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-3 Switch", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-4 Volume", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-4 Switch", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-5 Volume", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-5 Switch", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_VOLUME("PCM Volume", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("PCM Switch", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("MIC1 pin Volume", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("MIC1 pin Switch", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE1 pin Volume", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("LINE1 pin Switch", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_VOLUME("HP-OUT pin Volume", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("HP-OUT pin Switch", 0x17, 0x3, HDA_INPUT),
Eh, is there a loopback control from the headphone?
- HDA_CODEC_VOLUME("CD pin Volume", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD pin Switch", 0x17, 0x4, HDA_INPUT), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Input Source",
@@ -985,10 +985,6 @@ static const struct hda_verb cxt5045_test_init_verbs[] = { {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x18, AC_VERB_SET_DIGI_CONVERT_1, 0},
- /* Start with output sum widgets muted and their output gains at min */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Unmute retasking pin widget output buffers since the default
- state appears to be output. As the pin mode is changed by the
- user the pin mode control will take care of enabling the pin's
@@ -1003,11 +999,11 @@ static const struct hda_verb cxt5045_test_init_verbs[] = { /* Set ADC connection select to match default mixer setting (mic1 * pin) */
- {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x17, AC_VERB_SET_CONNECT_SEL, 0x01},
/* Mute all inputs to mixer widget (even unconnected ones) */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer pin */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Mic1 pin */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* Line pin */ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* HP pin */