From: ChiYuan Huang cy_huang@richtek.com
From the datasheet, the only way to meet the lowest power consumption is
to pull low the 'pwdnn' gpio. But if it is low, IC will keep in reset state, all registers reset to default.
And the power consumption is listed below 1. amp off and 'pwdnn' high => idle state, PVDD = 1mA, DVDD = 7mA 2. amp off and 'pwdnn' low => shutdown state, PVDD < 20uA, DVDD < 15uA
It's the large difference for the consumption current
This fix is to use pm_runtime and regcache to handle 'pwdnn' gpio control.
Signed-off-by: ChiYuan Huang cy_huang@richtek.com --- sound/soc/codecs/rt9120.c | 111 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 105 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/rt9120.c b/sound/soc/codecs/rt9120.c index 94d42be..da495bd 100644 --- a/sound/soc/codecs/rt9120.c +++ b/sound/soc/codecs/rt9120.c @@ -7,6 +7,7 @@ #include <linux/i2c.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <sound/pcm.h> @@ -75,6 +76,7 @@ enum { struct rt9120_data { struct device *dev; struct regmap *regmap; + struct gpio_desc *pwdnn_gpio; int chip_idx; };
@@ -160,6 +162,8 @@ static int rt9120_codec_probe(struct snd_soc_component *comp)
snd_soc_component_init_regmap(comp, data->regmap);
+ pm_runtime_get_sync(comp->dev); + /* Internal setting */ if (data->chip_idx == CHIP_IDX_RT9120S) { snd_soc_component_write(comp, RT9120_REG_INTERCFG, 0xde); @@ -167,6 +171,9 @@ static int rt9120_codec_probe(struct snd_soc_component *comp) } else snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x04);
+ pm_runtime_mark_last_busy(comp->dev); + pm_runtime_put(comp->dev); + return 0; }
@@ -338,6 +345,18 @@ static const struct regmap_access_table rt9120_wr_table = { .n_yes_ranges = ARRAY_SIZE(rt9120_wr_yes_ranges), };
+static bool rt9120_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x00 ... 0x01: + case 0x10: + case 0x30 ... 0x40: + return true; + default: + return false; + } +} + static int rt9120_get_reg_size(unsigned int reg) { switch (reg) { @@ -397,14 +416,49 @@ static int rt9120_reg_write(void *context, unsigned int reg, unsigned int val) return i2c_smbus_write_i2c_block_data(i2c, reg, size, rawp + offs); }
+static const struct reg_default rt9120_reg_defaults[] = { + { .reg = 0x02, .def = 0x02 }, + { .reg = 0x03, .def = 0xf2 }, + { .reg = 0x04, .def = 0x01 }, + { .reg = 0x05, .def = 0xc0 }, + { .reg = 0x06, .def = 0x28 }, + { .reg = 0x07, .def = 0x04 }, + { .reg = 0x08, .def = 0xff }, + { .reg = 0x09, .def = 0x01 }, + { .reg = 0x0a, .def = 0x01 }, + { .reg = 0x0b, .def = 0x00 }, + { .reg = 0x0c, .def = 0x04 }, + { .reg = 0x11, .def = 0x30 }, + { .reg = 0x12, .def = 0x08 }, + { .reg = 0x13, .def = 0x12 }, + { .reg = 0x14, .def = 0x09 }, + { .reg = 0x15, .def = 0x00 }, + { .reg = 0x20, .def = 0x7ff }, + { .reg = 0x21, .def = 0x180 }, + { .reg = 0x22, .def = 0x180 }, + { .reg = 0x23, .def = 0x00 }, + { .reg = 0x24, .def = 0x80 }, + { .reg = 0x25, .def = 0x180 }, + { .reg = 0x26, .def = 0x640 }, + { .reg = 0x27, .def = 0x180 }, + { .reg = 0x63, .def = 0x5e }, + { .reg = 0x65, .def = 0x66 }, + { .reg = 0x6c, .def = 0xe0 }, + { .reg = 0xf8, .def = 0x44 }, +}; + static const struct regmap_config rt9120_regmap_config = { .reg_bits = 8, .val_bits = 32, .max_register = RT9120_REG_DIGCFG, + .reg_defaults = rt9120_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(rt9120_reg_defaults), + .cache_type = REGCACHE_RBTREE,
.reg_read = rt9120_reg_read, .reg_write = rt9120_reg_write,
+ .volatile_reg = rt9120_volatile_reg, .wr_table = &rt9120_wr_table, .rd_table = &rt9120_rd_table, }; @@ -450,7 +504,6 @@ static int rt9120_do_register_reset(struct rt9120_data *data) static int rt9120_probe(struct i2c_client *i2c) { struct rt9120_data *data; - struct gpio_desc *pwdnn_gpio; struct regulator *dvdd_supply; int dvdd_supply_volt, ret;
@@ -461,12 +514,12 @@ static int rt9120_probe(struct i2c_client *i2c) data->dev = &i2c->dev; i2c_set_clientdata(i2c, data);
- pwdnn_gpio = devm_gpiod_get_optional(&i2c->dev, "pwdnn", - GPIOD_OUT_HIGH); - if (IS_ERR(pwdnn_gpio)) { + data->pwdnn_gpio = devm_gpiod_get_optional(&i2c->dev, "pwdnn", + GPIOD_OUT_HIGH); + if (IS_ERR(data->pwdnn_gpio)) { dev_err(&i2c->dev, "Failed to initialize 'pwdnn' gpio\n"); - return PTR_ERR(pwdnn_gpio); - } else if (pwdnn_gpio) { + return PTR_ERR(data->pwdnn_gpio); + } else if (data->pwdnn_gpio) { dev_dbg(&i2c->dev, "'pwdnn' from low to high, wait chip on\n"); msleep(RT9120_CHIPON_WAITMS); } @@ -508,11 +561,55 @@ static int rt9120_probe(struct i2c_client *i2c) } }
+ pm_runtime_set_autosuspend_delay(&i2c->dev, 1000); + pm_runtime_use_autosuspend(&i2c->dev); + pm_runtime_set_active(&i2c->dev); + pm_runtime_mark_last_busy(&i2c->dev); + pm_runtime_enable(&i2c->dev); + return devm_snd_soc_register_component(&i2c->dev, &rt9120_component_driver, &rt9120_dai, 1); }
+static int rt9120_remove(struct i2c_client *i2c) +{ + pm_runtime_disable(&i2c->dev); + pm_runtime_set_suspended(&i2c->dev); + return 0; +} + +static int __maybe_unused rt9120_runtime_suspend(struct device *dev) +{ + struct rt9120_data *data = dev_get_drvdata(dev); + + if (data->pwdnn_gpio) { + regcache_cache_only(data->regmap, true); + regcache_mark_dirty(data->regmap); + gpiod_set_value(data->pwdnn_gpio, 0); + } + + return 0; +} + +static int __maybe_unused rt9120_runtime_resume(struct device *dev) +{ + struct rt9120_data *data = dev_get_drvdata(dev); + + if (data->pwdnn_gpio) { + gpiod_set_value(data->pwdnn_gpio, 1); + msleep(RT9120_CHIPON_WAITMS); + regcache_cache_only(data->regmap, false); + regcache_sync(data->regmap); + } + + return 0; +} + +static const struct dev_pm_ops rt9120_pm_ops = { + SET_RUNTIME_PM_OPS(rt9120_runtime_suspend, rt9120_runtime_resume, NULL) +}; + static const struct of_device_id __maybe_unused rt9120_device_table[] = { { .compatible = "richtek,rt9120", }, { } @@ -523,8 +620,10 @@ static struct i2c_driver rt9120_driver = { .driver = { .name = "rt9120", .of_match_table = rt9120_device_table, + .pm = &rt9120_pm_ops, }, .probe_new = rt9120_probe, + .remove = rt9120_remove, }; module_i2c_driver(rt9120_driver);