On Wed, 03 Jan 2018 11:39:57 +0100, Freaky wrote:
Hi there,
we're having issues enabling the headphone out on an iMac 14.1 (A1418).
The parameters snd-hda-intel.model=imac27 or snd-hda-intel.model=imac27_122 do not resolve the problem.
Plug detection seems to be working fine, upon plugging the headphone, speaker-out will mute and headphone out will unmute. Unplugging it does the reverse. There's no audio on the headphone out however.
We ran the hda analyzer python script and when enabling 'out-dir', 'enable' and 'data' on the GPIO's marked as [2] the audio starts working.
If we unplug/plug the headphone then the audio is dead again. Need to uncheck and check them and it will work again.
Ran alsa-info.sh, whilst the GPIO's marked as [2] were enabled:
http://www.alsa-project.org/db/?f=86db8b16d0118edd1feab9626c68eed4735b943e
Do you need to enable GPIO[2] for which output? Does it control both speaker and headphone outputs, or only one of them?
Also, no pin config change is needed but for GPIO setup?
thanks,
Takashi