This patch adds common driver for the Top block of the Samsung Exynos SoC Low Power Audio Subsystem. This is a minimal driver which prepares resources for IP blocks like I2S, audio DMA and UART and exposes a regmap for the Top block registers. Also system power ops are added to ensure the Audio Subsystem is operational after system suspend/resume cycle.
Signed-off-by: Inha Song ideal.song@samsung.com Signed-off-by: Beomho Seo beomho.seo@samsung.com Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com ---
Changes since v4: - none.
Changes since v3: - moved from sound/soc/samsung and rewritten as a MFD driver, - PMU register definitions moved to include/linux/mfd/syscon/exynos5-pmu.h, - added regmap for LPASS Top SFR region, - cleaned up register bit field defintions.
Changes since v2: - move misplaced SND_SAMSUNG_AUDSS Kconfig symbol addition to this patch. --- drivers/mfd/Kconfig | 8 ++ drivers/mfd/Makefile | 1 + drivers/mfd/exynos-lpass.c | 185 +++++++++++++++++++++++++++++++++ include/linux/mfd/syscon/exynos5-pmu.h | 4 +- 4 files changed, 197 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/exynos-lpass.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2d1fb64..a7ec890 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -281,6 +281,14 @@ config MFD_DLN2 etc. must be enabled in order to use the functionality of the device.
+config MFD_EXYNOS_LPASS + tristate "Samsung Exynos SoC Low Power Audio Subsystem" + select MFD_CORE + select REGMAP_MMIO + help + Select this option to enable support for Samsung Exynos Low Power + Audio Subsystem. + config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2ba3ba3..41510bb 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o +obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c new file mode 100644 index 0000000..956ce1f --- /dev/null +++ b/drivers/mfd/exynos-lpass.c @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2015 - 2016 Samsung Electronics Co., Ltd. + * + * Authors: Inha Song ideal.song@samsung.com + * Sylwester Nawrocki s.nawrocki@samsung.com + * + * Samsung Exynos SoC series Low Power Audio Subsystem driver. + * + * This module provides regmap for the Top SFR region and instantiates + * devices for IP blocks like DMAC, I2S, UART. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/exynos5-pmu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/types.h> + +/* LPASS Top register definitions */ +#define SFR_LPASS_CORE_SW_RESET (0x08) +#define LPASS_SB_SW_RESET (1 << 11) +#define LPASS_UART_SW_RESET (1 << 10) +#define LPASS_PCM_SW_RESET (1 << 9) +#define LPASS_I2S_SW_RESET (1 << 8) +#define LPASS_WDT1_SW_RESET (1 << 4) +#define LPASS_WDT0_SW_RESET (1 << 3) +#define LPASS_TIMER_SW_RESET (1 << 2) +#define LPASS_MEM_SW_RESET (1 << 1) +#define LPASS_DMA_SW_RESET (1 << 0) + +#define SFR_LPASS_INTR_CA5_MASK (0x48) +#define SFR_LPASS_INTR_CPU_MASK (0x58) +#define LPASS_INTR_APM (1 << 9) +#define LPASS_INTR_MIF (1 << 8) +#define LPASS_INTR_TIMER (1 << 7) +#define LPASS_INTR_DMA (1 << 6) +#define LPASS_INTR_GPIO (1 << 5) +#define LPASS_INTR_I2S (1 << 4) +#define LPASS_INTR_PCM (1 << 3) +#define LPASS_INTR_SLIMBUS (1 << 2) +#define LPASS_INTR_UART (1 << 1) +#define LPASS_INTR_SFR (1 << 0) + +struct exynos_lpass { + struct regmap *pmu; + struct regmap *top; +}; + +static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask) +{ + unsigned int val = 0; + + regmap_read(lpass->top, SFR_LPASS_CORE_SW_RESET, &val); + + val &= ~mask; + regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val); + + usleep_range(100, 150); + + val |= mask; + regmap_write(lpass->top, SFR_LPASS_CORE_SW_RESET, val); +} + +static void exynos_lpass_enable(struct exynos_lpass *lpass) +{ + /* Unmask SFR, DMA and I2S interrupt */ + regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, + LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S); + + regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, + LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S); + + /* Activate related PADs from retention state */ + regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION, + EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR); + + exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET); + exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET); + exynos_lpass_core_sw_reset(lpass, LPASS_MEM_SW_RESET); +} + +static void exynos_lpass_disable(struct exynos_lpass *lpass) +{ + /* Mask any unmasked IP interrupt sources */ + regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, 0); + regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, 0); + + /* Deactivate related PADs from retention state */ + regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION, 0); +} + +static const struct regmap_config exynos_lpass_reg_conf = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0xfc, + .fast_io = true, +}; + +static int exynos_lpass_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct exynos_lpass *lpass; + void __iomem *base_top; + struct resource *res; + + if (!dev->of_node) + return -ENODEV; + + lpass = devm_kzalloc(dev, sizeof(*lpass), GFP_KERNEL); + if (!lpass) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + base_top = devm_ioremap_resource(dev, res); + if (IS_ERR(base_top)) + return PTR_ERR(base_top); + + lpass->top = regmap_init_mmio(dev, base_top, + &exynos_lpass_reg_conf); + if (IS_ERR(lpass->top)) { + dev_err(dev, "LPASS top regmap initialization failed\n"); + return PTR_ERR(lpass->top); + } + + lpass->pmu = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(lpass->pmu)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); + return PTR_ERR(lpass->pmu); + } + + platform_set_drvdata(pdev, lpass); + exynos_lpass_enable(lpass); + + return of_platform_populate(dev->of_node, NULL, NULL, dev); +} + +static int exynos_lpass_suspend(struct device *dev) +{ + struct exynos_lpass *lpass = dev_get_drvdata(dev); + + exynos_lpass_disable(lpass); + return 0; +} + +static int exynos_lpass_resume(struct device *dev) +{ + struct exynos_lpass *lpass = dev_get_drvdata(dev); + + exynos_lpass_enable(lpass); + return 0; +} + +static const struct of_device_id exynos_lpass_of_match[] = { + { .compatible = "samsung,exynos5433-lpass" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_lpass_of_match); + +static SIMPLE_DEV_PM_OPS(lpass_pm_ops, exynos_lpass_suspend, + exynos_lpass_resume); + +static struct platform_driver exynos_lpass_driver = { + .driver = { + .name = "exynos-lpass", + .pm = &lpass_pm_ops, + .of_match_table = exynos_lpass_of_match, + }, + .probe = exynos_lpass_probe, +}; +module_platform_driver(exynos_lpass_driver); + +MODULE_DESCRIPTION("Samsung Low Power Audio Subsystem driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h index 76f30f9..c28ff21 100644 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -43,8 +43,10 @@ #define EXYNOS5433_MIPI_PHY2_CONTROL (0x718)
#define EXYNOS5_PHY_ENABLE BIT(0) - #define EXYNOS5_MIPI_PHY_S_RESETN BIT(1) #define EXYNOS5_MIPI_PHY_M_RESETN BIT(2)
+#define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028) +#define EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR BIT(28) + #endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */ -- 1.9.1