Hi,
I'm still trying to figure out the issue with the capture and playback breaking with implicit feedback.
I've disabled setting the sync ep for my device and did the following: start capture start playback stop playback Now, after a while, capture stops.
I sniffed the usb traffic, and saw this: When I stop the traffic, the driver sets the alternate setting to 0 on the playback interface (2 for my device). So far so good.
The first iso inbound packet has data in it, but starting from the second packet, it's all zero (in length). After a while, the device stops sending packets completely. The driver still tries, and evetually sets the alternate setting to 0 on the capture interface (3 for my device). Again, there is no implicit feedback involved here.
I also ruled out playback interface being put into altsetting 1 (without us knowing it) when the capture was put into altsetting 1 by doing a GET_INTERFACE in set_format().
I am not sure if this an M-Audio issue, just my specific device (Fast Track C400) or maybe it appears in other devices.
Anyone has an idea why this happens? I'd appreciate if anyone can test this on other devices.
Clemens, since you recently added support for Roland devices that use implicit feedback, would you please test it and see if you get the same results, if you have time?
If it helps, I can send the capture.
Cheers, Eldad
P.S. GET_INTERFACE adapted from drivers/usb/misc/usbtest.c:
static int snd_usb_get_interface(struct usb_device *dev, struct usb_interface *iface) { int ret; char buf;
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), USB_REQ_GET_INTERFACE, USB_DIR_IN|USB_RECIP_INTERFACE, 0, iface->altsetting[0].desc.bInterfaceNumber, &buf, sizeof(buf), USB_CTRL_GET_TIMEOUT);
if (ret == sizeof(buf)) return buf;
return -ERANGE; }