Add source file and header file for tas2783 driver. Update Kconfig and Makefile for tas2783 driver.
Signed-off-by: Baojun Xu baojun.xu@ti.com
--- Change in v2: - change all registers access to regmap. - change header file include order. - remove tas2783_sdw_read(). - remove regmap_bus and relative function. - change custom access to regmap. - return if get calibration data from EFI failed. - remove mutex protect for null function. - remove tasdevice_startup() as no actions needed. - remove sysclk function as no action needed. - remove tasdevice_mute(). - remove crc8 look up table generate. - remove first_hw_init flag. - change some define name to TAS2783_XXX. - remove SMS_HTONL(), use le_to_cpup(). - remove enum channel define. - change struct and element name for FW. - remove global address elements. - remove irq and gpio in structure. - remove tasdevice structure. --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 872 +++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 113 +++++ 4 files changed, 999 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index c2de4ee72183..a4d334faca5e 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -240,6 +240,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2781_COMLIB imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1758,6 +1759,17 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips.
+config SND_SOC_TAS2783 + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + depends on SOUNDWIRE + select REGMAP + select CRC32_SARWATE + help + Enable support for Texas Instruments TAS2783 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + Note the TAS2783 driver implements a flexible and configurable + algo coff setting, for one, two, even multiple TAS2783 chips. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index b48a9a323b84..3298dfa3b9d5 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -276,6 +276,7 @@ snd-soc-tas2770-objs := tas2770.o snd-soc-tas2781-comlib-objs := tas2781-comlib.o snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o snd-soc-tas2781-i2c-objs := tas2781-i2c.o +snd-soc-tas2783-objs := tas2783-sdw.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -648,6 +649,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..f916ac9c5520 --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,871 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier. +// +// Copyright (C) 2023 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2783 driver implements a flexible and configurable +// algo coefficient setting for single TAS2783 chips. +// +// Author: Baojun Xu baojun.xu@ti.com +// Author: Kevin Lu kevin-lu@ti.com +// + +#include <linux/crc32.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm_params.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "tas2783.h" + +static const unsigned int tas2783_calibration_reg[] = { + TAS2783_CALIBRATION_RE, + TAS2783_CALIBRATION_RE_LOW, + TAS2783_CALIBRATION_INV_RE, + TAS2783_CALIBRATION_POW, + TAS2783_CALIBRATION_TLIMIT, + 0, +}; + +static const struct reg_default tas2783_reg_defaults[] = { + // Default values for ROM mode. Activated. + { 0x8002, 0x1a}, // Put AMP in power down mode, B0P0R02. + { 0x800e, 0x44}, // VSense from slot 4, B0P0R0E. + { 0x800f, 0x40}, // ISense from slot 0, B0P0R0E. + { 0x8097, 0xc8}, // SARBurstMask = 0, B0P1R17. + { 0x80b5, 0x74}, + { 0x8099, 0x20}, + { 0xfe8d, 0x0d}, + { 0xfebe, 0x4a}, + { 0x8230, 0x00}, + { 0x8231, 0x00}, + { 0x8232, 0x00}, + { 0x8233, 0x01}, // YMEM[70] = 1. B0P4R30. + { 0x8418, 0x00}, // 0 dB in B0P8R18. + { 0x8419, 0x00}, + { 0x841a, 0x00}, + { 0x841b, 0x00}, + { 0x8428, 0x40}, // Unmute channel, B0P8R28. + { 0x8429, 0x00}, + { 0x842a, 0x00}, + { 0x842b, 0x00}, + { 0x8548, 0x00}, // 0dB in B0PAR48. + { 0x8549, 0x00}, + { 0x854a, 0x00}, + { 0x854b, 0x00}, + { 0x8558, 0x40}, // unmute channel, B0PAR58. + { 0x8559, 0x00}, + { 0x855a, 0x00}, + { 0x855b, 0x00}, + { 0x800a, 0x3a}, // Enable both channel in B0P0RA. + { 0x805c, 0xd9}, // Enable clock detected in B0P0R5C. + { 0x8002, 0x00}, // Put AMP in active mode, B0P0R02. + /* Below register was used to select function, entity, CS, CN. */ + { SDW_SDCA_CTL(1, 1, 2, 0), 0}, // 0x40400088. + { SDW_SDCA_CTL(1, 1, 1, 0), 0}, // 0x40400090. + { SDW_SDCA_CTL(1, 2, 1, 0), 0}, // 0x40400108. +}; + +static bool tas2783_readable_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8000 ... 0xc000: // Page 0 ~ 127. + case 0xfe80 ... 0xfeff: // Page 253. + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_UDMPU21, + TAS2783_SDCA_CTL_UDMPU_CLUSTER, 0): + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, TAS2783_DEVICE_CHANNEL_LEFT): + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, TAS2783_DEVICE_CHANNEL_RIGHT): + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_PDE23, + TAS2783_SDCA_CTL_REQ_POWER_STATE, 0): + case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, TAS2783_SDCA_ENT_PDE22, + TAS2783_SDCA_CTL_REQ_POWER_STATE, 0): + return true; + default: + return false; + } +} + +static bool tas2783_volatile_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8001: + // Only reset register was volatiled. + return true; + default: + return false; + } +} + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .max_register = 0x41008000 + TASDEVICE_REG(0xa1, 0x60, 0x7f), + .reg_defaults = tas2783_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static int tasdevice_clamp(int val, int max, unsigned int invert) +{ + /* Keep in valid area, out of range value don't care. */ + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + return val; +} + +static int tas2783_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct regmap *map = tas_dev->regmap; + int val = 0, ret; + + if (!map) { + ret = -EINVAL; + dev_err(tas_dev->dev, "%s, regmap doesn't exist.\n", + __func__); + goto out; + } + /* Read the primary device as the whole */ + ret = regmap_read(map, mc->reg, &val); + dev_dbg(tas_dev->dev, "%s, get digital vol %d from %x with %d\n", + __func__, val, mc->reg, ret); + if (ret) { + dev_err(tas_dev->dev, "%s, get digital vol error %x.\n", + __func__, ret); + goto out; + } + ucontrol->value.integer.value[0] = + tasdevice_clamp(val, mc->max, mc->invert); + +out: + return ret; +} + +static int tas2783_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct regmap *map = tas_dev->regmap; + int val, ret; + + if (!map) { + dev_err(tas_dev->dev, "%s, regmap doesn't exist.\n", + __func__); + return -EINVAL; + } + val = tasdevice_clamp(ucontrol->value.integer.value[0], + mc->max, mc->invert); + + ret = regmap_write(map, mc->reg, val); + if (ret != 0) { + dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n", + mc->reg, val, ret); + return ret; + } + dev_dbg(tas_dev->dev, "%s, Put digital vol %d into %x.\n", + __func__, val, mc->reg); + + return 1; +} + +static int tas2783_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct regmap *map = tas_dev->regmap; + unsigned char mask; + int ret, val; + + if (!map) { + dev_err(tas_dev->dev, "%s, regmap doesn't exist.\n", + __func__); + return -EINVAL; + } + /* Read the primary device */ + ret = regmap_read(map, mc->reg, &val); + dev_dbg(tas_dev->dev, "%s, get AMP vol %d from %x with %d\n", + __func__, val, mc->reg, ret); + + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + ucontrol->value.integer.value[0] = tasdevice_clamp(val, mc->max, + mc->invert); + + return ret; +} + +static int tas2783_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec + = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct regmap *map = tas_dev->regmap; + unsigned char mask; + int val, ret; + + if (!map) { + dev_err(tas_dev->dev, "%s, regmap doesn't exist.\n", + __func__); + return -EINVAL; + } + mask = (1 << fls(mc->max)) - 1; + mask <<= mc->shift; + val = tasdevice_clamp(ucontrol->value.integer.value[0], mc->max, + mc->invert); + ret = regmap_update_bits(map, mc->reg, mask, val << mc->shift); + if (ret != 0) { + dev_err(tas_dev->dev, "Write @%#x..%#x:%d\n", + mc->reg, val, ret); + return ret; + } + + dev_dbg(tas_dev->dev, "wr amp %x into 0x%08x by %x shift %d.\n", + val, mc->reg, mask, mc->shift); + + return ret; +} + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, 0, tas2783_amp_getvol, + tas2783_amp_putvol, amp_vol_tlv), + SOC_SINGLE_RANGE_EXT_TLV("Digital Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, tas2783_digital_getvol, + tas2783_digital_putvol, dvc_tlv), +}; + +static void tas2783_apply_calib( + struct tasdevice_priv *tas_priv, unsigned int *cali_data) +{ + struct regmap *map = tas_priv->regmap; + int i = 0, ret; + u8 *reg_start; + + if (!map) { + dev_err(tas_priv->dev, "%s, regmap doesn't exist.\n", + __func__); + return; + } + if (!tas_priv->sdw_peripheral) { + dev_err(tas_priv->dev, "%s, slaver doesn't exist.\n", + __func__); + return; + } + if ((tas_priv->sdw_peripheral->id.unique_id < + TAS2783_DEVICE_ID_START) || + (tas_priv->sdw_peripheral->id.unique_id > + TAS2783_DEVICE_ID_END)) { + dev_err(tas_priv->dev, "%s, wrong unique id: %x.\n", + __func__, tas_priv->sdw_peripheral->id.unique_id); + return; + } + reg_start = + (u8 *)(cali_data+(tas_priv->sdw_peripheral->id.unique_id - + TAS2783_DEVICE_ID_START)*TAS2783_CALIBRATION_SIZE); + while (tas2783_calibration_reg[i] != 0) { + ret = regmap_bulk_write(map, tas2783_calibration_reg[i], + reg_start + i, 4); + if (ret != 0) { + dev_err(tas_priv->dev, "Cali failed %x:%d\n", + tas2783_calibration_reg[i], ret); + break; + } + i++; + } +} + +static int tas2783_calibration(struct tasdevice_priv *tas_priv) +{ + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + static efi_char16_t efi_name[] = TAS2783_CALIDATA_NAME; + struct tm *tm = &tas_priv->tm; + unsigned int attr, crc; + unsigned int *tmp_val; + efi_status_t status; + + tas_priv->cali_data.total_sz = TAS2783_MAX_CALIDATA_SIZE; + /* Get real size of UEFI variable */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_priv->cali_data.total_sz, tas_priv->cali_data.data); + dev_dbg(tas_priv->dev, "cali get %lx bytes with result : %ld\n", + tas_priv->cali_data.total_sz, status); + if (status == EFI_BUFFER_TOO_SMALL) { + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_priv->cali_data.total_sz, + tas_priv->cali_data.data); + dev_dbg(tas_priv->dev, "cali get %lx bytes result:%ld\n", + tas_priv->cali_data.total_sz, status); + } + /* Failed got calibration data from EFI. */ + if (status != 0) { + dev_dbg(tas_priv->dev, "cali get %lx error with:%ld\n", + tas_priv->cali_data.total_sz, status); + return 0; + } + /* Print all content of calibration data for debug. */ + for (int i = 0; i < tas_priv->cali_data.total_sz; i += 4) { + dev_dbg(tas_priv->dev, "cali get %02x %02x %02x %02x", + tas_priv->cali_data.data[i], + tas_priv->cali_data.data[i+1], + tas_priv->cali_data.data[i+2], + tas_priv->cali_data.data[i+3]); + } + + tmp_val = (unsigned int *)tas_priv->cali_data.data; + + crc = crc32(~0, tas_priv->cali_data.data, 84) ^ ~0; + dev_dbg(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n", + crc, tmp_val[21]); + + if (crc == tmp_val[21]) { + time64_to_tm(tmp_val[20], 0, tm); + dev_dbg(tas_priv->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + tas2783_apply_calib(tas_priv, tmp_val); + } else { + dev_dbg(tas_priv->dev, "CRC error!\n"); + tas_priv->cali_data.total_sz = 0; + } + + return 0; +} + +static void tasdevice_rca_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct regmap *map = tas_dev->regmap; + struct tas2783_firmware_node *p; + int offset = 0, num_nodes = 0, img_sz, ret; + unsigned char *buf; + + mutex_lock(&tas_dev->codec_lock); + + if (!fmw || !fmw->data) { + dev_err(tas_dev->dev, + "Failed to read %s, no side - effect on driver running\n", + tas_dev->rca_binaryname); + ret = -EINVAL; + goto out; + } + if (!map) { + dev_err(tas_dev->dev, "Failed to load regmap.\n"); + ret = -EINVAL; + goto out; + } + buf = (unsigned char *)fmw->data; + + img_sz = le32_to_cpup((__le32 *)&buf[offset]); + dev_dbg(tas_dev->dev, "Got %x:%lx.\n", img_sz, fmw->size); + offset += sizeof(img_sz); + if (img_sz != fmw->size) { + dev_err(tas_dev->dev, + "Size not match, %d %u", (int)fmw->size, img_sz); + ret = -EINVAL; + goto out; + } + + while ((offset < img_sz) && (num_nodes < TAS2783_MAX_NODES)) { + /* Store firmware into context of driver. */ + p = (struct tas2783_firmware_node *)(buf + offset); + tas_dev->firmware_node[num_nodes].vendor_id = + p->vendor_id; + tas_dev->firmware_node[num_nodes].file_id = p->file_id; + tas_dev->firmware_node[num_nodes].version_id = + p->version_id; + tas_dev->firmware_node[num_nodes].length = p->length; + tas_dev->firmware_node[num_nodes].download_addr = + p->download_addr; + tas_dev->firmware_node[num_nodes].start_addr = + ((char *)p) + sizeof(unsigned int)*5; + + ret = regmap_bulk_write(map, p->download_addr, + p->start_addr, p->length); + dev_dbg(tas_dev->dev, "Wr %d :%x:%x:%x:%x:%x:%x %d.\n", + num_nodes, p->vendor_id, p->file_id, + p->version_id, p->length, p->download_addr, + p->start_addr[0], ret); + + offset += sizeof(unsigned int)*5 + p->length; + num_nodes++; + } + + tas2783_calibration(tas_dev); + +out: + mutex_unlock(&tas_dev->codec_lock); + if (fmw) + release_firmware(fmw); +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, + 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC") +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"OUT", NULL, "ASI"}, + {"ASI OUT", NULL, "DMIC"} +}; + +static int tasdevice_set_sdw_stream( + struct snd_soc_dai *dai, void *sdw_stream, int direction) +{ + struct sdw_stream_data *stream; + + if (!sdw_stream) + return 0; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) + return -ENOMEM; + + stream->sdw_stream = sdw_stream; + + /* Use tx_mask or rx_mask to set dma_data */ + snd_soc_dai_dma_data_set(dai, direction, stream); + + return 0; +} + +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sdw_stream_data *stream; + + stream = snd_soc_dai_get_dma_data(dai, substream); + snd_soc_dai_set_dma_data(dai, substream, NULL); + kfree(stream); +} + +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tasdevice = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_data *stream; + int retval; + + dev_dbg(dai->dev, "%s %s", __func__, dai->name); + stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!stream) + return -EINVAL; + + if (!tasdevice->sdw_peripheral) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + retval = sdw_stream_add_slave(tasdevice->sdw_peripheral, + &stream_config, &port_config, 1, stream->sdw_stream); + if (retval) { + dev_err(dai->dev, "Unable to configure port\n"); + return retval; + } + + return 0; +} + +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tasdevice = + snd_soc_component_get_drvdata(component); + struct sdw_stream_data *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!tasdevice->sdw_peripheral) + return -EINVAL; + + sdw_stream_remove_slave(tasdevice->sdw_peripheral, stream->sdw_stream); + return 0; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .hw_params = tasdevice_sdw_hw_params, + .hw_free = tasdevice_sdw_pcm_hw_free, + .set_stream = tasdevice_set_sdw_stream, + .shutdown = tasdevice_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static void tas2783_reset(struct tasdevice_priv *tas_dev) +{ + struct regmap *map = tas_dev->regmap; + unsigned char value_sdw; + int ret; + + if (!map) { + dev_err(tas_dev->dev, "Failed to load regmap.\n"); + return; + } + value_sdw = TAS2873_REG_SWRESET_RESET; + ret = regmap_write(map, TAS2873_REG_SWRESET, value_sdw); + dev_dbg(tas_dev->dev, "%s TAS2783 was reseted %d.\n", + __func__, ret); + usleep_range(1000, 1050); +} + +static int tasdevice_codec_probe(struct snd_soc_component *codec) +{ + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(codec); + int ret; + + dev_dbg(tas_dev->dev, "%s called for TAS2783 start.\n", + __func__); + /* Codec Lock Hold */ + mutex_lock(&tas_dev->codec_lock); + + tas2783_reset(tas_dev); + + tas_dev->codec = codec; + + scnprintf(tas_dev->rca_binaryname, 64, "MY_SWFT_x%01x.bin", + tas_dev->sdw_peripheral->id.unique_id); + + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + tas_dev->rca_binaryname, tas_dev->dev, GFP_KERNEL, + tas_dev, tasdevice_rca_ready); + dev_dbg(tas_dev->dev, + "%s: request_firmware %x open status: 0x%08x\n", + __func__, tas_dev->sdw_peripheral->id.unique_id, ret); + + /* Codec Lock Release*/ + mutex_unlock(&tas_dev->codec_lock); + + dev_dbg(tas_dev->dev, "%s was called end.\n", __func__); + return ret; +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_codec_probe, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret; + + mutex_init(&tas_dev->dev_lock); + + dev_set_drvdata(tas_dev->dev, tas_dev); + + mutex_init(&tas_dev->codec_lock); + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:0x%x\n", + __func__, ret); + } + dev_dbg(tas_dev->dev, "%s was called for TAS2783.\n", __func__); + + return ret; +} + +static int tasdevice_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + struct sdw_dpn_prop *dpn; + unsigned long addr; + int nval, i, j; + u32 bit; + + prop->scp_int1_mask = + SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = 0x04; /* BITMAP: 00000100 */ + prop->sink_ports = 0x2; /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = true; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + dev_dbg(&slave->dev, "%s was performed.\n", __func__); + + return 0; +} + +static int tasdevice_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct tasdevice_priv *tasdevice = dev_get_drvdata(dev); + + if (tasdevice->hw_init) + return 0; + + /* PM runtime is only enabled when + * a Slave reports as Attached + * set autosuspend parameters + */ + pm_runtime_set_autosuspend_delay(&slave->dev, 3000); + pm_runtime_use_autosuspend(&slave->dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(&slave->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(&slave->dev); + + pm_runtime_enable(&slave->dev); + + pm_runtime_get_noresume(&slave->dev); + + /* Mark Slave initialization complete */ + tasdevice->hw_init = true; + + pm_runtime_mark_last_busy(&slave->dev); + pm_runtime_put_autosuspend(&slave->dev); + + dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); + return 0; +} + +static int tasdevice_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tasdevice_priv *tasdevice = dev_get_drvdata(&slave->dev); + + /* Update the status */ + tasdevice->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + tasdevice->hw_init = false; + + /* Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tasdevice->hw_init || tasdevice->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return tasdevice_io_init(&slave->dev, slave); +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops tasdevice_sdw_ops = { + .read_prop = tasdevice_read_prop, + .update_status = tasdevice_update_status, +}; + +static void tasdevice_remove(struct tasdevice_priv *tas_dev) +{ + snd_soc_unregister_component(tas_dev->dev); + + mutex_destroy(&tas_dev->dev_lock); + mutex_destroy(&tas_dev->codec_lock); +} + +static int tasdevice_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct device *dev = &peripheral->dev; + struct tasdevice_priv *tas_dev; + int ret; + + dev_dbg(dev, "%s was called.\n", __func__); + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) { + ret = -ENOMEM; + goto out; + } + tas_dev->dev = &peripheral->dev; + tas_dev->chip_id = id->driver_data; + tas_dev->sdw_peripheral = peripheral; + tas_dev->hw_init = false; + + dev_dbg(dev, "%d chip id %x for TAS2783.\n", + peripheral->id.unique_id, tas_dev->chip_id); + + dev_set_drvdata(dev, tas_dev); + + tas_dev->regmap = devm_regmap_init_sdw(peripheral, + &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) { + ret = PTR_ERR(tas_dev->regmap); + dev_err(dev, "Failed devm_regmap_init: %d\n", ret); + goto out; + } + ret = tasdevice_init(tas_dev); + +out: + if (ret < 0 && tas_dev != NULL) + tasdevice_remove(tas_dev); + + return ret; + +} + +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) +{ + struct tasdevice_priv *tas_dev = + dev_get_drvdata(&peripheral->dev); + + if (tas_dev) + tasdevice_remove(tas_dev); + + return 0; +} + +static const struct sdw_device_id tasdevice_sdw_id[] = { + SDW_SLAVE_ENTRY(0x0102, 0x0, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id); + +static struct sdw_driver tasdevice_sdw_driver = { + .driver = { + .name = "slave-tas2783", + }, + .probe = tasdevice_sdw_probe, + .remove = tasdevice_sdw_remove, + .ops = &tasdevice_sdw_ops, + .id_table = tasdevice_sdw_id, +}; + +module_sdw_driver(tasdevice_sdw_driver); + +MODULE_AUTHOR("Baojun Xu baojun.xu@ti.com"); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..09575e741400 --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier. + * + * Copyright (C) 2023 Texas Instruments Incorporated + * https://www.ti.com + * + * The TAS2783 driver implements a flexible and configurable + * algo coff setting for single TAS2783 chips. + * + * Author: Baojun Xu baojun.xu@ti.com + */ + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) + +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* BOOK, PAGE Control Register */ +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 +\ + (page * 128) + reg) + +/*Software Reset */ +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01) +#define TAS2873_REG_SWRESET_RESET BIT(0) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1A) +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +/* Calibration data */ +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74) +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14) +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c) +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x0d, 0x3c) +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c) + +#define TAS2783_CALIBRATION_SIZE 5 // int data number. + +#define TAS2783_DEVICE_ID_START 0x08 // Unique id start +#define TAS2783_DEVICE_ID_END 0x0F // Unique id end + +/* TAS2783 SDCA Control - function number */ +#define FUNC_NUM_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ +#define TAS2783_SDCA_ENT_PDE23 0x0C +#define TAS2783_SDCA_ENT_PDE22 0x0B +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_UDMPU21 0x10 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 + +#define TAS2783_MAX_NODES 100 +#define TAS2783_MAX_CALIDATA_SIZE 252 +#define TAS2783_CALIDATA_NAME L"CALI_DATA" + +struct tas2783_firmware_node { + unsigned int vendor_id; + unsigned int file_id; + unsigned int version_id; + unsigned int length; + unsigned int download_addr; + unsigned char *start_addr; +}; + +struct calibration_data { + unsigned long total_sz; + unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; +}; + +struct tasdevice_priv { + struct tas2783_firmware_node firmware_node[TAS2783_MAX_NODES]; + struct snd_soc_component *component; + struct calibration_data cali_data; + struct sdw_slave *sdw_peripheral; + struct sdw_bus_params params; + struct mutex codec_lock; + struct regmap *regmap; + struct mutex dev_lock; + struct device *dev; + struct tm tm; + + enum sdw_slave_status status; + + bool hw_init; + + unsigned int chip_id; + unsigned char rca_binaryname[64]; + unsigned char dev_name[32]; + + void *codec; +}; + +struct sdw_stream_data { + struct sdw_stream_runtime *sdw_stream; +}; + +#endif /*__TAS2783_H__ */