Now we have a register write minimisation code in DAPM we don't need to worry about the ordering of the enable and disable of the PGA and the output stage.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm9081.c | 32 ++++++-------------------------- 1 files changed, 6 insertions(+), 26 deletions(-)
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index effaf75..55cdf29 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -389,27 +389,6 @@ SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0), SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0), };
-static int speaker_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_codec *codec = w->codec; - unsigned int reg = snd_soc_read(codec, WM9081_POWER_MANAGEMENT); - - switch (event) { - case SND_SOC_DAPM_POST_PMU: - reg |= WM9081_SPK_ENA; - break; - - case SND_SOC_DAPM_PRE_PMD: - reg &= ~WM9081_SPK_ENA; - break; - } - - snd_soc_write(codec, WM9081_POWER_MANAGEMENT, reg); - - return 0; -} - struct _fll_div { u16 fll_fratio; u16 fll_outdiv; @@ -747,9 +726,8 @@ SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0,
SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0),
-SND_SOC_DAPM_PGA_E("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0, - speaker_event, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_PGA("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA("Speaker", WM9081_POWER_MANAGEMENT, 1, 0, NULL, 0),
SND_SOC_DAPM_OUTPUT("LINEOUT"), SND_SOC_DAPM_OUTPUT("SPKN"), @@ -780,8 +758,10 @@ static const struct snd_soc_dapm_route wm9081_audio_paths[] = { { "Speaker PGA", NULL, "TOCLK" }, { "Speaker PGA", NULL, "CLK_SYS" },
- { "SPKN", NULL, "Speaker PGA" }, - { "SPKP", NULL, "Speaker PGA" }, + { "Speaker", NULL, "Speaker PGA" }, + + { "SPKN", NULL, "Speaker" }, + { "SPKP", NULL, "Speaker" }, };
static int wm9081_set_bias_level(struct snd_soc_codec *codec,