Convert the NAU8821 audio CODEC bindings to DT schema.
Signed-off-by: Seven Lee wtli@nuvoton.com --- .../devicetree/bindings/sound/nau8821.txt | 55 -------- .../bindings/sound/nuvoton,nau8821.yaml | 125 ++++++++++++++++++ 2 files changed, 125 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/nau8821.txt create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt deleted file mode 100644 index 7c84e7c7327a..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8821.txt +++ /dev/null @@ -1,55 +0,0 @@ -Nuvoton NAU88L21 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8821" - - - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1). - -Optional properties: - - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. - - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, - otherwise pin in high impedance state. - - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock. - - nuvoton,key_enable: Headset button detection switch. - -Example: - - headset: nau8821@1b { - compatible = "nuvoton,nau8821"; - reg = <0x1b>; - interrupt-parent = <&gpio>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - nuvoton,jkdet-enable; - nuvoton,jkdet-pull-enable; - nuvoton,jkdet-pull-up; - nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - nuvoton,jack-insert-debounce = <7>; - nuvoton,jack-eject-debounce = <7>; - nuvoton,dmic-clk-threshold = 3072000; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml new file mode 100644 index 000000000000..fc2f4ce4db88 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU88L21 audio codec + +maintainers: + - Seven Lee wtli@nuvoton.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8821 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-enable: + description: Enable jack detection via JKDET pin. + type: boolean + + nuvoton,jkdet-pull-enable: + description: Enable JKDET pin pull. If set - pin pull enabled, + otherwise pin in high impedance state. + type: boolean + + nuvoton,jkdet-pull-up: + description: Pull-up JKDET pin. If set then JKDET pin is pull up, + otherwise pull down. + type: boolean + + nuvoton,key-enable: + description: handles key press detection. + type: boolean + + nuvoton,jkdet-polarity: + description: JKDET pin polarity. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,micbias-voltage: + description: MICBIAS output level select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # VDDA + - 1 # VDDA * 1 + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,vref-impedance: + description: VMID Tie-off impedance select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # open + - 1 # 25KOhms + - 2 # 125KOhms + - 3 # 2.5KOhms + default: 2 + + nuvoton,jack-insert-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 7 + + nuvoton,jack-eject-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + + nuvoton,dmic-clk-threshold: + description: DMIC clock speed expected value. Unit is Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3072000 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1b { + compatible = "nuvoton,nau8821"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,key-enable; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,micbias-voltage = <6>; + nuvoton,vref-impedance = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <0>; + nuvoton,dmic-clk-threshold = <3072000>; + #sound-dai-cells = <0>; + }; + };