From: Jenny TC jenny.tc@intel.com
To enable S24_LE format, sample_type in topology fw has to be set to 1. But sample_type defined in topology firmware configuration is not getting reflected in the dsp param. This patch sets sample_type in base config so that the sample type defined in the topology firmware is reflected in the dsp params. This issues was uncovered while debugging the S24_LE format which require the MSB byte in 32 bit word to be skipped. Setting sample_type in topology firmware to 1 helps to skip MSB byte word.
Signed-off-by: Jenny TC jenny.tc@intel.com --- sound/soc/intel/skylake/skl-messages.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index 28c4806..4bf70b4 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -483,6 +483,7 @@ static void skl_set_base_module_format(struct skl_sst *ctx, base_cfg->audio_fmt.bit_depth = format->bit_depth; base_cfg->audio_fmt.valid_bit_depth = format->valid_bit_depth; base_cfg->audio_fmt.ch_cfg = format->ch_cfg; + base_cfg->audio_fmt.sample_type = format->sample_type;
dev_dbg(ctx->dev, "bit_depth=%x valid_bd=%x ch_config=%x\n", format->bit_depth, format->valid_bit_depth,