[RESEND of the series after removing the extra patches]
The SKL driver does not code DSP topology in driver. With this series the soc topology framework is used to parse the topology information to create widgets, controls and route map for the FW topology.
It adds routines for SKL DSP module configuration, compute resources for modules, initialize and bind the pipe modules. It uses the SKL IPC library added earlier to send IPC for initialize the module, bind/unbind modules.
Last patch in this series removes the unused dais.
Jeeja KP (9): ASoC: Intel: Skylake: Add pipe and modules handlers ASoC: Intel: Skylake: Add module configuration helpers ASoC: Intel: Skylake: add DSP platform widget event handlers ASoC: Intel: Skylake: Add FE and BE hw_params handling ASoC: Intel: Skylake: Add topology core init and handlers ASoC: Intel: Skylake: Initialize and load DSP controls ASoC: Intel: Skylake: Add DSP support and enable it ASoC: Intel: Skylake: Initialize NHLT table ASoC: Intel: Skylake: Remove CPU dai that is not used
sound/soc/intel/skylake/Makefile | 3 +- sound/soc/intel/skylake/skl-pcm.c | 173 ++-- sound/soc/intel/skylake/skl-topology.c | 1264 ++++++++++++++++++++++++++ sound/soc/intel/skylake/skl-topology.h | 21 + sound/soc/intel/skylake/skl-tplg-interface.h | 78 ++ sound/soc/intel/skylake/skl.c | 29 +- sound/soc/intel/skylake/skl.h | 11 + 7 files changed, 1511 insertions(+), 68 deletions(-) create mode 100644 sound/soc/intel/skylake/skl-topology.c