What is the best way to test/debug the alc668 driver these days?
I am running kernel 3.14.1 (debian testing/sid).
The laptop is an ASUS N750JK.
Sound works for front left/right speakers but the back speakers and external lfe channel is not working on this laptop.
You have to post output of alsa-info.sh
Seem BIOS only set up the front speakers
There is nothing in the bios to configure the audio device
How many audio jacks ?
Standard headphone/mic + yellow external lfe (sonic master). There is also hdmi but I am not testing that at the moment.
http://www.asus.com/Notebooks_Ultrabooks/N750JK/specifications/
Do you mean headset ?
There are the following jacks:
1 x headphone
Do you mean no optical spdif ?
1 x mic(line in)
Switching Mic Jack to line in can be performed by mic Jack mode switch using hint add_jack_modes=true
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/tree/Documentat...
1 x sonic master (yellow) 1 x hdmi (intel Haswell hdmi)
Do it support headset or headphone ?
Do you mean there are four internal speakers ?
There are two front speakers which produce sound through the front bottom of the case. There are also two back speakers which do not produce
sound
in my tests so far.
Do it support surround40 in windows ?
I am not running windows OS on this machine but I suspect it does.
The external sonic master and headphone need two volume controls but alc668 only have three
The best way to test is using latest git version and hda jack retask
to
- four internal speaker and headphone
- two internal speaker, headphone and external subwoofer
Once you confirm the nodes of the speakers, subwooder You need to decide whether headphone share the volume controls with
the
speaker/subwoofer
I have spent some time on this step already with 3.14.1
Did you retask the node of subwoofer as speaker or line out ?
I have tried both but I have not been able to identify the subwoofer.
I have tried playing with: 16, 19, 1a
Did you find the node of the rear speakers in (1) ?
I have not found them yet.
Did surround 4.0 work when you fix the rear speaker ?
Only the front speakers play audio but they don't work with 4.0 enabled
Did you find the node of the external subwoofer in (2) ?
Not yet.
Did the sonic master subwoofer detected ? hda jack sense test -a
I have grabbed the scripts but I get this error when running hda-analyzer:
You can use hda-verb GET_PIN_SENSE to test all the pin complex nodes which pincap support DETECT
Do the subwoofer only use right channel ?
I cannot hear the subwoofer at this point
Do surround 2.1 works ?
It says it is working but I do not get sound out of the sub woofer. I can hear static(whitenoise) through the front speakers (with pulseaudio test) if I set pins 0x19 and 0x1a to Line Out (Center/LFE) and Internal (Center/LFE) or vice versa with hdajackretask.
http://git.alsa-project.org/?p=alsa-tools.git;a=blob;f=hdajackretask/README;...
Did you use apply button(dyanmic reconfiguartion) or installment boot override (early patching) ?
Is there a specific reason this process is not already scripted other than no one has taken the time to do it?
Do surround 4.1 or 5.1 work when you fix both speaker and subwoofer ?
Surround 4.1/5/1 do not produce any sound from my tests so far (using PA Test)
Do you prefer driver create headphone volume control or subwoofer
volume
control ?
I would like the lfe to be sent through the yellow sonic master jack. I am not concerned with the headset jack at the moment. A cursory test shows just the right channel is working on the headset jack.
Can we not create a test script that will run through all the logical combinations and provide all the relevant info?
The driver hardcore the name of volume control to bass when there are
two
speaker nodes for those 2.1
I do not see any controls for the bass volume in alsamixer
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pc...
- I have found a couple of kernel bug reports for other ASUS models
with this chipset but they are both marked resolved. Should I open a new ticket ?
https://bugzilla.kernel.org/show_bug.cgi?id=65091 https://bugzilla.kernel.org/show_bug.cgi?id=66271
- I can hear static through the front speakers (with pulseaudio
test)
if I set pins 0x19 and 0x1a to Line Out (Center/LFE) and Internal (Center/LFE) or vice versa with hdajackretask.
For multi channel, the sequence number is ascending and the driver
expect
they have same type i.e, all speakers or all line out jacks
Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE
The rear speaker need same default association but sequence number higher than that of the front speaker
The external subwoofer may use [jack] speaker with same default association and higher sequence number if it can be detected
The driver won't use all of them for multi channel if you retasked it as line out