From: Mathias Nyman mathias.nyman@linux.intel.com
The event_ring_deq parameter is used to check if the event ring dequeue position is updated while calling by xhci_handle_event(), meaning there was an actual event on the ring to handle. In this case the driver needs to inform hardware about the updated dequeue position. Basically event_ring_deq just stores the old event ring dequeue position before calling the event handler.
Keeping track of software event dequeue updates this way is no longer useful as driver anyways reads the current hardware dequeue position within the handle event, and checks if it needs to be updated.
The driver might anyway need to modify the EHB (event handler busy) bit in the same register as the dequeue pointer even if the actual dequeue position did not change.
Change-Id: I7ece833f9f52f16a40d4fc2c10530cdd4c94497e Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Wesley Cheng quic_wcheng@quicinc.com --- drivers/usb/host/xhci-ring.c | 37 +++++++++++++++--------------------- 1 file changed, 15 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 49f10dc25516..1136c6170b1a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3032,30 +3032,26 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) */ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, struct xhci_interrupter *ir, - union xhci_trb *event_ring_deq, bool clear_ehb) { u64 temp_64; dma_addr_t deq;
temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); - /* If necessary, update the HW's version of the event ring deq ptr. */ - if (event_ring_deq != ir->event_ring->dequeue) { - deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg, - ir->event_ring->dequeue); - if (deq == 0) - xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n"); - /* - * Per 4.9.4, Software writes to the ERDP register shall - * always advance the Event Ring Dequeue Pointer value. - */ - if ((temp_64 & ERST_PTR_MASK) == (deq & ERST_PTR_MASK)) - return; + deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg, + ir->event_ring->dequeue); + if (deq == 0) + xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n"); + /* + * Per 4.9.4, Software writes to the ERDP register shall always advance + * the Event Ring Dequeue Pointer value. + */ + if ((temp_64 & ERST_PTR_MASK) == (deq & ERST_PTR_MASK) && !clear_ehb) + return;
- /* Update HC event ring dequeue pointer */ - temp_64 = ir->event_ring->deq_seg->num & ERST_DESI_MASK; - temp_64 |= deq & ERST_PTR_MASK; - } + /* Update HC event ring dequeue pointer */ + temp_64 = ir->event_ring->deq_seg->num & ERST_DESI_MASK; + temp_64 |= deq & ERST_PTR_MASK;
/* Clear the event handler busy flag (RW1C) */ if (clear_ehb) @@ -3084,7 +3080,6 @@ static void xhci_clear_interrupt_pending(struct xhci_hcd *xhci, irqreturn_t xhci_irq(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - union xhci_trb *event_ring_deq; struct xhci_interrupter *ir; irqreturn_t ret = IRQ_NONE; u64 temp_64; @@ -3142,15 +3137,13 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) goto out; }
- event_ring_deq = ir->event_ring->dequeue; /* FIXME this should be a delayed service routine * that clears the EHB. */ while (xhci_handle_event(xhci, ir) > 0) { if (event_loop++ < TRBS_PER_SEGMENT / 2) continue; - xhci_update_erst_dequeue(xhci, ir, event_ring_deq, false); - event_ring_deq = ir->event_ring->dequeue; + xhci_update_erst_dequeue(xhci, ir, false);
/* ring is half-full, force isoc trbs to interrupt more often */ if (ir->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN) @@ -3159,7 +3152,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) event_loop = 0; }
- xhci_update_erst_dequeue(xhci, ir, event_ring_deq, true); + xhci_update_erst_dequeue(xhci, ir, true); ret = IRQ_HANDLED;
out: