The codec device properties are printed for debugging.
Signed-off-by: Ben Zhang benzh@chromium.org --- sound/soc/codecs/nau8825.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index bd58b96..7fc7b4e 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1100,6 +1100,34 @@ static void nau8825_reset_chip(struct regmap *regmap) regmap_write(regmap, NAU8825_REG_RESET, 0x00); }
+static void nau8825_print_device_properties(struct nau8825 *nau8825) +{ + int i; + struct device *dev = nau8825->dev; + + dev_dbg(dev, "jkdet-enable: %d\n", nau8825->jkdet_enable); + dev_dbg(dev, "jkdet-pull-enable: %d\n", nau8825->jkdet_pull_enable); + dev_dbg(dev, "jkdet-pull-up: %d\n", nau8825->jkdet_pull_up); + dev_dbg(dev, "jkdet-polarity: %d\n", nau8825->jkdet_polarity); + dev_dbg(dev, "micbias-voltage: %d\n", nau8825->micbias_voltage); + dev_dbg(dev, "vref-impedance: %d\n", nau8825->vref_impedance); + + dev_dbg(dev, "sar-threshold-num: %d\n", nau8825->sar_threshold_num); + for (i = 0; i < nau8825->sar_threshold_num; i++) + dev_dbg(dev, "sar-threshold[%d]=%d\n", i, + nau8825->sar_threshold[i]); + + dev_dbg(dev, "sar-hysteresis: %d\n", nau8825->sar_hysteresis); + dev_dbg(dev, "sar-voltage: %d\n", nau8825->sar_voltage); + dev_dbg(dev, "sar-compare-time: %d\n", nau8825->sar_compare_time); + dev_dbg(dev, "sar-sampling-time: %d\n", nau8825->sar_sampling_time); + dev_dbg(dev, "short-key-debounce: %d\n", nau8825->key_debounce); + dev_dbg(dev, "jack-insert-debounce: %d\n", + nau8825->jack_insert_debounce); + dev_dbg(dev, "jack-eject-debounce: %d\n", + nau8825->jack_eject_debounce); +} + static int nau8825_read_device_properties(struct device *dev, struct nau8825 *nau8825) {
@@ -1213,6 +1241,8 @@ static int nau8825_i2c_probe(struct i2c_client *i2c, nau8825->dev = dev; nau8825->irq = i2c->irq;
+ nau8825_print_device_properties(nau8825); + nau8825_reset_chip(nau8825->regmap); ret = regmap_read(nau8825->regmap, NAU8825_REG_I2C_DEVICE_ID, &value); if (ret < 0) {