Viliam Kubis wrote:
I have tried the patch ..., but the surround does not work.
Okay, next try:
--- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -552,24 +552,30 @@ static void via_auto_init_hp_out(struct } }
+static int is_smart51_pins(struct via_spec *spec, hda_nid_t pin); + static void via_auto_init_analog_input(struct hda_codec *codec) { struct via_spec *spec = codec->spec; + unsigned int ctl; int i;
for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = spec->autocfg.input_pins[i]; + if (!nid) + continue;
+ if (spec->smart51_enabled && is_smart51_pins(spec, nid)) + ctl = PIN_OUT; + else if (i <= AUTO_PIN_FRONT_MIC) + ctl = PIN_VREF50; + else + ctl = PIN_IN; snd_hda_codec_write(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - (i <= AUTO_PIN_FRONT_MIC ? - PIN_VREF50 : PIN_IN)); - + AC_VERB_SET_PIN_WIDGET_CONTROL, ctl); } }
-static int is_smart51_pins(struct via_spec *spec, hda_nid_t pin); - static void set_pin_power_state(struct hda_codec *codec, hda_nid_t nid, unsigned int *affected_parm) { @@ -658,6 +664,8 @@ static void set_jack_power_state(struct /* PW0 (19h), SW1 (18h), AOW1 (11h) */ parm = AC_PWRST_D3; set_pin_power_state(codec, 0x19, &parm); + if (spec->smart51_enabled) + parm = AC_PWRST_D0; snd_hda_codec_write(codec, 0x18, 0, AC_VERB_SET_POWER_STATE, parm); snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE, @@ -667,6 +675,8 @@ static void set_jack_power_state(struct if (is_8ch) { parm = AC_PWRST_D3; set_pin_power_state(codec, 0x22, &parm); + if (spec->smart51_enabled) + parm = AC_PWRST_D0; snd_hda_codec_write(codec, 0x26, 0, AC_VERB_SET_POWER_STATE, parm); snd_hda_codec_write(codec, 0x24, 0, @@ -3915,6 +3925,13 @@ static int vt1708S_auto_fill_dac_nids(st } }
+ /* for Smart 5.1, line/mic inputs double as output pins */ + if (cfg->line_outs == 1) { + spec->multiout.num_dacs = 3; + spec->multiout.dac_nids[AUTO_SEQ_SURROUND] = 0x11; + spec->multiout.dac_nids[AUTO_SEQ_CENLFE] = 0x24; + } + return 0; }
@@ -3932,7 +3949,8 @@ static int vt1708S_auto_create_multi_out for (i = 0; i <= AUTO_SEQ_SIDE; i++) { nid = cfg->line_out_pins[i];
- if (!nid) + /* for Smart 5.1, there are always at least six channels */ + if (!nid && i > AUTO_SEQ_CENLFE) continue;
nid_vol = nid_vols[i];