Hi Srinivas,
On 3/17/20 4:53 AM, Srinivas Kandagatla wrote:
Recent addition of SoundWire stream state-machine checks in linux-next have shown an existing issue with handling soundwire streams in codec drivers.
In general soundwire stream prepare/enable/disable can be called from either codec/machine/controller driver. However calling it in codec driver means that if multiple instances(Left/Right speakers) of the same codec is connected to the same stream then it will endup calling stream prepare/enable/disable more than once. This will mess up the stream state-machine checks in the soundwire core.
That's a known issue that we've fixed on the Intel side a month or two ago. Unfortunately the review cycle is so slow that you don't benefit immediately from our fixes, what can I say.
Moving this stream handling to machine driver would fix this issue and also allow board/platform specfic power sequencing.
It's fine but that's unnecessary, and if you start having multiple machine drivers with the same codecs you'll duplicate the stream handling code.
All you need to ensure in a multi-codec or multi-cpu dai case is that the stream is allocated once, and yes that's typically done as part of the dailink .startup callback.
Then it's fine to call the stream prepare or enable multiple times from the individual dai level, and only do the transition for the first call.
See patch "soundwire: stream: only change state if needed" that I just shared. We've used it both in 'TDM' mode with two codecs hanging off of the same link and in 'aggregated' mode with two codecs on separate links.
Srinivas Kandagatla (2): ASoC: qcom: sdm845: handle soundwire stream ASoC: codecs: wsa881x: remove soundwire stream handling
sound/soc/codecs/wsa881x.c | 44 +----------------------- sound/soc/qcom/Kconfig | 2 +- sound/soc/qcom/sdm845.c | 69 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 71 insertions(+), 44 deletions(-)