From: Arnd Bergmann arnd@arndb.de
The i2s driver uses the mapped __iomem address of the FIFO as the DMA address for the device. This apparently works on loongarch because of the way it handles __iomem pointers as aliases of physical addresses, but this is not portable to other architectures and causes a compiler warning when dma addresses are not the same size as pointers:
sound/soc/loongson/loongson_i2s_pci.c: In function 'loongson_i2s_pci_probe': sound/soc/loongson/loongson_i2s_pci.c:110:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] 110 | tx_data->dev_addr = (dma_addr_t)i2s->reg_base + LS_I2S_TX_DATA; | ^ sound/soc/loongson/loongson_i2s_pci.c:113:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] 113 | rx_data->dev_addr = (dma_addr_t)i2s->reg_base + LS_I2S_RX_DATA; | ^
Change the driver to instead use the physical address as stored in the PCI BAR resource directly. Since 'dev_addr' is a 32-bit address, I think this results in the same truncated address on loongarch but is otherwise closer to portable code and avoids the warning.
Fixes: d84881e06836d ("ASoC: Add support for Loongson I2S controller") Signed-off-by: Arnd Bergmann arnd@arndb.de --- This is only build tested and I don't understand the loongarch specifics that well, please review or test for actual hardware requirements. --- sound/soc/loongson/loongson_i2s_pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/loongson/loongson_i2s_pci.c b/sound/soc/loongson/loongson_i2s_pci.c index 6dcfb17d3276d..fa90361865c6c 100644 --- a/sound/soc/loongson/loongson_i2s_pci.c +++ b/sound/soc/loongson/loongson_i2s_pci.c @@ -107,10 +107,10 @@ static int loongson_i2s_pci_probe(struct pci_dev *pdev, tx_data = &i2s->tx_dma_data; rx_data = &i2s->rx_dma_data;
- tx_data->dev_addr = (dma_addr_t)i2s->reg_base + LS_I2S_TX_DATA; + tx_data->dev_addr = pci_resource_start(pdev, 0) + LS_I2S_TX_DATA; tx_data->order_addr = i2s->reg_base + LS_I2S_TX_ORDER;
- rx_data->dev_addr = (dma_addr_t)i2s->reg_base + LS_I2S_RX_DATA; + rx_data->dev_addr = pci_resource_start(pdev, 0) + LS_I2S_RX_DATA; rx_data->order_addr = i2s->reg_base + LS_I2S_RX_ORDER;
tx_data->irq = fwnode_irq_get_byname(fwnode, "tx");