Add optional interrupt status read/clear if the master quirks are set.
In the case of the parity, the master quirk is only applied if the Slave doesn't already have a parity-related quirk.
Co-developed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com --- drivers/soundwire/bus.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 46885429928a..04eb879de145 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -1253,6 +1253,7 @@ static int sdw_slave_set_frequency(struct sdw_slave *slave) static int sdw_initialize_slave(struct sdw_slave *slave) { struct sdw_slave_prop *prop = &slave->prop; + int status; int ret; u8 val;
@@ -1260,6 +1261,44 @@ static int sdw_initialize_slave(struct sdw_slave *slave) if (ret < 0) return ret;
+ if (slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH) { + /* Clear bus clash interrupt before enabling interrupt mask */ + status = sdw_read_no_pm(slave, SDW_SCP_INT1); + if (status < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (BUS_CLASH) read failed:%d\n", status); + return status; + } + if (status & SDW_SCP_INT1_BUS_CLASH) { + dev_warn(&slave->dev, "Bus clash detected before INT mask is enabled\n"); + ret = sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_BUS_CLASH); + if (ret < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (BUS_CLASH) write failed:%d\n", ret); + return ret; + } + } + } + if ((slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY) && + !(slave->prop.quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) { + /* Clear parity interrupt before enabling interrupt mask */ + status = sdw_read_no_pm(slave, SDW_SCP_INT1); + if (status < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (PARITY) read failed:%d\n", status); + return status; + } + if (status & SDW_SCP_INT1_PARITY) { + dev_warn(&slave->dev, "PARITY error detected before INT mask is enabled\n"); + ret = sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_PARITY); + if (ret < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (PARITY) write failed:%d\n", ret); + return ret; + } + } + } + /* * Set SCP_INT1_MASK register, typically bus clash and * implementation-defined interrupt mask. The Parity detection