This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. It seems to have a single detection GPIO pin used to report everything as a Headset. But it has widgets for Headphone and Mic Jack, so expose both to userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak alpernebiyasak@gmail.com --- Also see https://github.com/xobs/pulseaudio-novena though I don't really understand PulseAudio configuration.
sound/soc/fsl/imx-es8328.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/sound/soc/fsl/imx-es8328.c b/sound/soc/fsl/imx-es8328.c index 85bd36fb68a2..6f0d031c1d5f 100644 --- a/sound/soc/fsl/imx-es8328.c +++ b/sound/soc/fsl/imx-es8328.c @@ -37,6 +37,16 @@ static struct snd_soc_jack_gpio headset_jack_gpios[] = { };
static struct snd_soc_jack headset_jack; +static struct snd_soc_jack_pin headset_jack_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Mic Jack", + .mask = SND_JACK_MICROPHONE, + }, +};
static int imx_es8328_dai_init(struct snd_soc_pcm_runtime *rtd) { @@ -46,9 +56,11 @@ static int imx_es8328_dai_init(struct snd_soc_pcm_runtime *rtd)
/* Headphone jack detection */ if (gpio_is_valid(data->jack_gpio)) { - ret = snd_soc_card_jack_new(rtd->card, "Headphone", - SND_JACK_HEADPHONE | SND_JACK_BTN_0, - &headset_jack); + ret = snd_soc_card_jack_new_pins(rtd->card, "Headphone", + SND_JACK_HEADSET | SND_JACK_BTN_0, + &headset_jack, + headset_jack_pins, + ARRAY_SIZE(headset_jack_pins)); if (ret) return ret;
@@ -68,6 +80,11 @@ static const struct snd_soc_dapm_widget imx_es8328_dapm_widgets[] = { SND_SOC_DAPM_REGULATOR_SUPPLY("audio-amp", 1, 0), };
+static const struct snd_kcontrol_new imx_es8328_controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone"), + SOC_DAPM_PIN_SWITCH("Mic Jack"), +}; + static int imx_es8328_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -183,6 +200,8 @@ static int imx_es8328_probe(struct platform_device *pdev) data->card.dev = dev; data->card.dapm_widgets = imx_es8328_dapm_widgets; data->card.num_dapm_widgets = ARRAY_SIZE(imx_es8328_dapm_widgets); + data->card.controls = imx_es8328_controls; + data->card.num_controls = ARRAY_SIZE(imx_es8328_controls); ret = snd_soc_of_parse_card_name(&data->card, "model"); if (ret) { dev_err(dev, "Unable to parse card name\n");