The gpiod handling is inspired from the bdw-rt5677 code. Apply same fix to avoid reference count issue while removing modules for consistency.
The SOF driver does not yet support this machine driver, and module load/unload with the SKL driver isn't well supported, so this was not tested on a device.
Suggested-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/intel/boards/kbl_rt5660.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/kbl_rt5660.c b/sound/soc/intel/boards/kbl_rt5660.c index e23dea9ab79a..3ff3afd36536 100644 --- a/sound/soc/intel/boards/kbl_rt5660.c +++ b/sound/soc/intel/boards/kbl_rt5660.c @@ -165,8 +165,8 @@ static int kabylake_rt5660_codec_init(struct snd_soc_pcm_runtime *rtd) dev_warn(component->dev, "Failed to add driver gpios\n");
/* Request rt5660 GPIO for lineout mute control, return if fails */ - ctx->gpio_lo_mute = devm_gpiod_get(component->dev, "lineout-mute", - GPIOD_OUT_HIGH); + ctx->gpio_lo_mute = gpiod_get(component->dev, "lineout-mute", + GPIOD_OUT_HIGH); if (IS_ERR(ctx->gpio_lo_mute)) { dev_err(component->dev, "Can't find GPIO_MUTE# gpio\n"); return PTR_ERR(ctx->gpio_lo_mute); @@ -207,6 +207,14 @@ static int kabylake_rt5660_codec_init(struct snd_soc_pcm_runtime *rtd) return 0; }
+static void kabylake_rt5660_codec_exit(struct snd_soc_pcm_runtime *rtd) +{ + struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card); + + if (!IS_ERR(ctx->gpio_lo_mute)) + gpiod_put(ctx->gpio_lo_mute)); +} + static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device) { struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card); @@ -421,6 +429,7 @@ static struct snd_soc_dai_link kabylake_rt5660_dais[] = { .id = 0, .no_pcm = 1, .init = kabylake_rt5660_codec_init, + .exit = kabylake_rt5660_codec_exit, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS,