On 12 May 2015 at 13:27, Dave Airlie airlied@gmail.com wrote:
On 12 May 2015 at 11:50, Dave Airlie airlied@gmail.com wrote:
Hi,
So I have a branch that makes no sound, http://cgit.freedesktop.org/~airlied/linux/log/?h=dp-mst-audio
and I'm not sure where I need to turn to next,
The Intel docs I've read are kinda vague, assuming you know lots of things I clearly don't.
so in theory my branch, sets up the SDP stream to the monitor in the payload creation, enables the codec in the intel GPU driver, and passes the ELD to the audio driver.
The audio driver uses the device list to get the presence/valid bits per device, and manages to retrieve the ELD. I even create ELD files in /proc/asound/HDMI/ that have sensible values in them
So it looks like I'm just missing some routing somewhere, most likely in the audio driver, then again I could be missing a lot more than that.
Just looking for any ideas or knowledge people may have locked in their brains or inside their firewalls.
Okay the branch now has audio on my test setup,
I've had to hack out the intel_not_share_assigned_cvt function it appears to do bad things, I set pin 6 to connection 0 (pin 2), the later sets on pin 5/7 to connection 1 by that function seems to reprogram pin 6.
I'm guessing the connection is assigned to a device not a pin in the new hw, and the same device is routed via pin 5/7 so I end up trashing it.
my test setup is a Haswell Lenovo t440s + docking station + Dell U2410.
ping audio guys?
can someone from alsa please take a look or some interest in this?
The graphics side patches are fairly trivial, also it would be good to get a good explaination of how the hw works,
from what I can see devices get connections not pins on this hw, and I notice that I don't always get 3 devices, so I'm not sure if devices are a dynamic thing we should be reprobing on some signal.
Dave.